Re: [PATCH v3 1/4] selftests: x86: check_initial_reg_state: remove manual counting and increase maintainability

[Shuah Khan <skhan@linuxfoundation.org>]

On 7/18/24 05:32, Muhammad Usama Anjum wrote:
> Removes manual counting of pass and fail tests. This increases readability
> of tests, but also improves maintainability of the tests. Print logs in
> standard format (without [RUN], [OK] tags)
> 
> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
> ---
> Changes since v1:
> - correct description of the patch
> 
> Changes since v2:
> - Update description of the patch and add before/after output
> 
> Before:
>    # selftests: x86: check_initial_reg_state_32
>    # [OK]	All GPRs except SP are 0
>    # [OK]	FLAGS is 0x202
>    ok 5 selftests: x86: check_initial_reg_state_32
> 
> After:
>    # selftests: x86: check_initial_reg_state_32
>    # TAP version 13
>    # 1..2
>    # ok 1 All GPRs except SP are 0
>    # ok 2 FLAGS is 0x202
>    # # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
>    ok 5 selftests: x86: check_initial_reg_state_32

What's the output you see if you were run this as:

make ksefltest TARGETS=x86

How is this different from the output from the above command?

Please provide the same information for your other patches in this
series

thanks,
-- Shuah