mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: syzbot <syzbot+fb7c2dd166d3ea63df2a@syzkaller.appspotmail.com>
To: halves@igalia.com, linux-kernel@vger.kernel.org,
	 syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [kvm-x86?] KASAN: use-after-free Read in kvm_setup_guest_pvclock
Date: Tue, 21 Jul 2026 07:40:02 -0700	[thread overview]
Message-ID: <6a5f84c2.42649fcc.22d900.0004.GAE@google.com> (raw)
In-Reply-To: <DK4AP9HEJ2ZC.13A6XWLH6AK6B@igalia.com>

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

 0000:00:00.0: Limiting direct PCI/PCI transfers
[    4.569474][    T1] PCI: CLS 0 bytes, default 64
[    4.571889][    T1] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.571911][    T1] software IO TLB: mapped [mem 0x00000000b4600000-0x00000000b8600000] (64MB)
[    4.576668][    T1] ACPI: bus type thunderbolt registered
[    4.604809][   T69] kworker/u8:4 (69) used greatest stack depth: 27824 bytes left
[    4.605349][    T1] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    4.667843][   T68] kworker/u8:3 (68) used greatest stack depth: 27600 bytes left
[    4.693093][    T1] kvm_amd: CPU 0 isn't AMD or Hygon
[    4.693126][    T1] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb7086095e, max_idle_ns: 440795277026 ns
[    4.693805][    T1] clocksource: Switched to clocksource tsc
[    4.735937][   T78] kworker/u8:1 (78) used greatest stack depth: 27240 bytes left
[    4.775502][    T1] Initialise system trusted keyrings
[    4.776914][   T94] kworker/u8:4 (94) used greatest stack depth: 26856 bytes left
[    4.778809][    T1] workingset: timestamp_bits=40 (anon: 35) max_order=21 bucket_order=0 (anon: 0)
[    4.794347][    T1] DLM installed
[    4.803270][    T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.820766][    T1] NFS: Registering the id_resolver key type
[    4.820934][    T1] Key type id_resolver registered
[    4.820948][    T1] Key type id_legacy registered
[    4.821314][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    4.821516][    T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    4.828086][    T1] smbdirect: subsystem loading...
[    4.842980][    T1] smbdirect: subsystem loaded
[    4.891092][    T1] Key type cifs.spnego registered
[    4.891558][    T1] Key type cifs.idmap registered
[    4.906529][    T1] ntfs3: Enabled Linux POSIX ACLs support
[    4.906543][    T1] ntfs3: Read-only LZX/Xpress compression included
[    4.907114][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    4.911063][    T1] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    4.911761][    T1] QNX4 filesystem 0.2.3 registered.
[    4.911930][    T1] qnx6: QNX6 filesystem 1.0.0 registered.
[    4.913356][    T1] fuse: init (API version 7.45)
[    4.922704][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[    4.926315][    T1] orangefs_init: module version upstream loaded
[    4.927651][    T1] JFS: nTxBlock = 8192, nTxLock = 65536
[    4.944092][    T1] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[    4.957411][    T1] 9p: Installing v9fs 9p2000 file system support
[    4.991879][    T1] NILFS version 2 loaded
[    4.991899][    T1] befs: version: 0.9.3
[    4.993486][    T1] ocfs2: Registered cluster interface o2cb
[    4.995705][    T1] ocfs2: Registered cluster interface user
[    5.006868][    T1] OCFS2 User DLM kernel interface loaded
[    5.046841][    T1] gfs2: GFS2 installed
[    5.068429][    T1] ceph: loaded (mds proto 32)
[    5.102190][    T1] NET: Registered PF_ALG protocol family
[    5.103074][    T1] async_tx: api initialized (async)
[    5.103141][    T1] Key type asymmetric registered
[    5.103216][    T1] Asymmetric key parser 'x509' registered
[    5.103231][    T1] Asymmetric key parser 'pkcs8' registered
[    5.103244][    T1] Key type pkcs7_test registered
[    5.105026][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239)
[    5.107338][    T1] io scheduler mq-deadline registered
[    5.107356][    T1] io scheduler kyber registered
[    5.107949][    T1] io scheduler bfq registered
[    5.110066][    T1] raid6: skipped pq benchmark and selected avx2x4
[    5.162638][    T1] input: Power Button as /devices/platform/LNXPWRBN:00/input/input0
[    5.164944][    T1] ACPI: button: Power Button [PWRF]
[    5.167933][    T1] input: Sleep Button as /devices/platform/LNXSLPBN:00/input/input1
[    5.172152][    T1] ACPI: button: Sleep Button [SLPF]
[    5.227446][  T156] kworker/u8:3 (156) used greatest stack depth: 26464 bytes left
[    5.249131][  T192] kworker/u8:7 (192) used greatest stack depth: 26184 bytes left
[    5.258909][    T1] ioatdma: Intel(R) QuickData Technology Driver 5.00
[    5.298972][   T10] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    5.299187][   T10] virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
[    5.343562][   T10] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[    5.343730][   T10] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[    5.382813][   T10] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[    5.382940][   T10] virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
[    5.411801][   T10] virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
[    6.372357][    T1] N_HDLC line discipline registered with maxframe=4096
[    6.375656][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    6.396359][    T1] 00:02: ttyS0 I/O:0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    6.424359][    T1] 00:03: ttyS1 I/O:0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    6.452988][    T1] 00:04: ttyS2 I/O:0x3e8 (irq = 6, base_baud = 115200) is a 16550A
[    6.479183][    T1] 00:05: ttyS3 I/O:0x2e8 (irq = 7, base_baud = 115200) is a 16550A
[    6.531386][    T1] Non-volatile memory driver v1.3
[    6.575265][    T1] usbcore: registered new interface driver xillyusb
[    6.587434][    T1] ACPI: bus type drm_connector registered
[    6.599051][    T1] [drm] Initialized vgem 1.0.0 for vgem on minor 0
[    6.607283][    T1] ------------[ cut here ]------------
[    6.607294][    T1] [PLANE:35:plane-0] pixel format with alpha exposed but blend mode not setup
[    6.607314][    T1] WARNING: drivers/gpu/drm/drm_mode_config.c:873 at drm_mode_config_validate+0x1c6d/0x1e60, CPU#0: swapper/0/1
[    6.607376][    T1] Modules linked in:
[    6.607413][    T1] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)} 
[    6.607432][    T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/25/2026
[    6.607449][    T1] RIP: 0010:drm_mode_config_validate+0x1cae/0x1e60
[    6.607476][    T1] Code: 0f 85 ae 00 00 00 4d 8d 77 10 8b 6d 00 4c 89 f0 48 c1 e8 03 80 3c 18 00 74 08 4c 89 f7 e8 9a 8a be fc 49 8b 16 4c 89 ef 89 ee <67> 48 0f b9 3a eb 05 e8 b6 24 52 fc 49 bd 00 00 00 00 00 fc ff df
[    6.607494][    T1] RSP: 0000:ffffc90000067810 EFLAGS: 00010246
[    6.607516][    T1] RAX: 1ffff11004c7f408 RBX: dffffc0000000000 RCX: ffff88801c6e5d00
[    6.607530][    T1] RDX: ffff8880262a51c0 RSI: 0000000000000023 RDI: ffffffff8fd973c0
[    6.607543][    T1] RBP: 0000000000000023 R08: 0000000000000000 R09: 0000000000000000
[    6.607554][    T1] R10: dffffc0000000000 R11: fffffbfff1f9c7f0 R12: dffffc0000000000
[    6.607568][    T1] R13: ffffffff8fd973c0 R14: ffff8880263fa040 R15: ffff8880263fa030
[    6.607582][    T1] FS:  0000000000000000(0000) GS:ffff888125a66000(0000) knlGS:0000000000000000
[    6.607597][    T1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    6.607608][    T1] CR2: ffff88823ffff000 CR3: 000000000e1b0000 CR4: 00000000003526f0
[    6.607623][    T1] Call Trace:
[    6.607634][    T1]  <TASK>
[    6.607659][    T1]  ? debugfs_create_file_full+0x3f/0x60
[    6.607689][    T1]  drm_dev_register+0x7f/0xd80
[    6.607719][    T1]  vkms_create+0x40d/0x4f0
[    6.607741][    T1]  ? __pfx_vkms_init+0x10/0x10
[    6.607769][    T1]  vkms_init+0x57/0x80
[    6.607791][    T1]  do_one_initcall+0x250/0x870
[    6.607811][    T1]  ? __pfx_vkms_init+0x10/0x10
[    6.607834][    T1]  ? __pfx_do_one_initcall+0x10/0x10
[    6.607867][    T1]  ? __pfx___schedule+0x10/0x10
[    6.607905][    T1]  ? irqentry_exit+0x218/0x8f0
[    6.607926][    T1]  ? lockdep_hardirqs_on+0x7a/0x110
[    6.607947][    T1]  ? irqentry_exit+0x218/0x8f0
[    6.607966][    T1]  ? trace_irq_disable+0x3b/0x140
[    6.608002][    T1]  ? parameq+0x14d/0x170
[    6.608028][    T1]  ? parse_args+0x9c3/0xad0
[    6.608065][    T1]  ? trace_kmalloc+0x2a/0xf0
[    6.608089][    T1]  ? rcu_is_watching+0x15/0xb0
[    6.608111][    T1]  do_initcall_level+0x10a/0x1a0
[    6.608138][    T1]  ? kernel_init+0x22/0x1d0
[    6.608163][    T1]  do_initcalls+0x59/0xa0
[    6.608189][    T1]  kernel_init_freeable+0x29d/0x3e0
[    6.608214][    T1]  ? __pfx_kernel_init+0x10/0x10
[    6.608239][    T1]  kernel_init+0x22/0x1d0
[    6.608262][    T1]  ? __pfx_kernel_init+0x10/0x10
[    6.608284][    T1]  ret_from_fork+0x514/0xb70
[    6.608308][    T1]  ? __pfx_ret_from_fork+0x10/0x10
[    6.608329][    T1]  ? __switch_to+0xc89/0x1420
[    6.608347][    T1]  ? __pfx_kernel_init+0x10/0x10
[    6.608373][    T1]  ret_from_fork_asm+0x1a/0x30
[    6.608405][    T1]  </TASK>
[    6.608426][    T1] Kernel panic - not syncing: kernel: panic_on_warn set ...
[    6.608438][    T1] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)} 
[    6.608458][    T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/25/2026
[    6.608467][    T1] Call Trace:
[    6.608474][    T1]  <TASK>
[    6.608481][    T1]  vpanic+0x56c/0xa60
[    6.608512][    T1]  ? __pfx__printk+0x10/0x10
[    6.608530][    T1]  ? __pfx_vpanic+0x10/0x10
[    6.608550][    T1]  ? is_bpf_text_address+0x292/0x2b0
[    6.608567][    T1]  ? is_bpf_text_address+0x26/0x2b0
[    6.608593][    T1]  panic+0xc5/0xd0
[    6.608615][    T1]  ? __pfx_panic+0x10/0x10
[    6.608646][    T1]  ? ret_from_fork_asm+0x1a/0x30
[    6.608671][    T1]  __warn+0x315/0x4c0
[    6.608692][    T1]  ? drm_mode_config_validate+0x1c6d/0x1e60
[    6.608721][    T1]  ? drm_mode_config_validate+0x1c6d/0x1e60
[    6.608745][    T1]  __report_bug+0x276/0x570
[    6.608771][    T1]  ? drm_mode_config_validate+0x1c6d/0x1e60
[    6.608800][    T1]  ? __pfx___report_bug+0x10/0x10
[    6.608826][    T1]  ? _raw_spin_unlock_irqrestore+0x30/0x80
[    6.608848][    T1]  ? lockdep_hardirqs_on+0x7a/0x110
[    6.608871][    T1]  ? rt_mutex_slowunlock+0x4ee/0xa20
[    6.608892][    T1]  report_bug_entry+0x19a/0x290
[    6.608914][    T1]  ? drm_mode_config_validate+0x1cae/0x1e60
[    6.608938][    T1]  ? drm_mode_config_validate+0x1cb3/0x1e60
[    6.608962][    T1]  handle_bug+0xce/0x200
[    6.608985][    T1]  exc_invalid_op+0x1a/0x50
[    6.609007][    T1]  asm_exc_invalid_op+0x1a/0x20
[    6.609025][    T1] RIP: 0010:drm_mode_config_validate+0x1cae/0x1e60
[    6.609050][    T1] Code: 0f 85 ae 00 00 00 4d 8d 77 10 8b 6d 00 4c 89 f0 48 c1 e8 03 80 3c 18 00 74 08 4c 89 f7 e8 9a 8a be fc 49 8b 16 4c 89 ef 89 ee <67> 48 0f b9 3a eb 05 e8 b6 24 52 fc 49 bd 00 00 00 00 00 fc ff df
[    6.609064][    T1] RSP: 0000:ffffc90000067810 EFLAGS: 00010246
[    6.609078][    T1] RAX: 1ffff11004c7f408 RBX: dffffc0000000000 RCX: ffff88801c6e5d00
[    6.609092][    T1] RDX: ffff8880262a51c0 RSI: 0000000000000023 RDI: ffffffff8fd973c0
[    6.609105][    T1] RBP: 0000000000000023 R08: 0000000000000000 R09: 0000000000000000
[    6.609116][    T1] R10: dffffc0000000000 R11: fffffbfff1f9c7f0 R12: dffffc0000000000
[    6.609129][    T1] R13: ffffffff8fd973c0 R14: ffff8880263fa040 R15: ffff8880263fa030
[    6.609167][    T1]  ? debugfs_create_file_full+0x3f/0x60
[    6.609195][    T1]  drm_dev_register+0x7f/0xd80
[    6.609224][    T1]  vkms_create+0x40d/0x4f0
[    6.609245][    T1]  ? __pfx_vkms_init+0x10/0x10
[    6.609267][    T1]  vkms_init+0x57/0x80
[    6.609289][    T1]  do_one_initcall+0x250/0x870
[    6.609309][    T1]  ? __pfx_vkms_init+0x10/0x10
[    6.609332][    T1]  ? __pfx_do_one_initcall+0x10/0x10
[    6.609366][    T1]  ? __pfx___schedule+0x10/0x10
[    6.609396][    T1]  ? irqentry_exit+0x218/0x8f0
[    6.609416][    T1]  ? lockdep_hardirqs_on+0x7a/0x110
[    6.609437][    T1]  ? irqentry_exit+0x218/0x8f0
[    6.609456][    T1]  ? trace_irq_disable+0x3b/0x140
[    6.609493][    T1]  ? parameq+0x14d/0x170
[    6.609516][    T1]  ? parse_args+0x9c3/0xad0
[    6.609516][    T1]  ? trace_kmalloc+0x2a/0xf0
[    6.609516][    T1]  ? rcu_is_watching+0x15/0xb0
[    6.609516][    T1]  do_initcall_level+0x10a/0x1a0
[    6.609516][    T1]  ? kernel_init+0x22/0x1d0
[    6.609516][    T1]  do_initcalls+0x59/0xa0
[    6.609516][    T1]  kernel_init_freeable+0x29d/0x3e0
[    6.609516][    T1]  ? __pfx_kernel_init+0x10/0x10
[    6.609516][    T1]  kernel_init+0x22/0x1d0
[    6.609516][    T1]  ? __pfx_kernel_init+0x10/0x10
[    6.609516][    T1]  ret_from_fork+0x514/0xb70
[    6.609516][    T1]  ? __pfx_ret_from_fork+0x10/0x10
[    6.609516][    T1]  ? __switch_to+0xc89/0x1420
[    6.609516][    T1]  ? __pfx_kernel_init+0x10/0x10
[    6.609516][    T1]  ret_from_fork_asm+0x1a/0x30
[    6.609516][    T1]  </TASK>
[    6.609516][    T1] Kernel Offset: disabled


syzkaller build log:
go env (err=<nil>)
AR='ar'
CC='gcc'
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_ENABLED='1'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
CXX='g++'
GCCGO='gccgo'
GO111MODULE='auto'
GOAMD64='v1'
GOARCH='amd64'
GOAUTH='netrc'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOCACHEPROG=''
GODEBUG=''
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFIPS140='off'
GOFLAGS=''
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build3991592182=/tmp/go-build -gno-record-gcc-switches'
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMOD='/syzkaller/jobs/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOMODCACHE='/syzkaller/jobs/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTELEMETRY='local'
GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.26.0'
GOWORK=''
PKG_CONFIG='pkg-config'

git status (err=<nil>)
HEAD detached at 00e8b0fd0d
nothing to commit, working tree clean


tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=00e8b0fd0d17bb06fe23c0e743356351ada78c22 -X github.com/google/syzkaller/prog.gitRevisionDate=20260630-130833"  ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=00e8b0fd0d17bb06fe23c0e743356351ada78c22 -X github.com/google/syzkaller/prog.gitRevisionDate=20260630-130833"  ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=00e8b0fd0d17bb06fe23c0e743356351ada78c22 -X github.com/google/syzkaller/prog.gitRevisionDate=20260630-130833"  -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
mkdir -p ./bin/linux_amd64
g++ -o ./bin/linux_amd64/syz-executor executor/executor.cc \
	-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -std=c++17 -I. -Iexecutor/_include   -DGOOS_linux=1 -DGOARCH_amd64=1 \
	-DHOSTGOOS_linux=1 -DGIT_REVISION=\"00e8b0fd0d17bb06fe23c0e743356351ada78c22\"
/usr/bin/ld: /tmp/ccOIdA2r.o: in function `Connection::Connect(char const*, char const*)':
executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x386): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
./tools/check-syzos.sh 2>/dev/null


Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=10d692b9580000


Tested on:

commit:         3fe08b97 Add linux-next specific files for 20260720
git tree:       linux-next
kernel config:  https://syzkaller.appspot.com/x/.config?x=65d6389adb1eb707
dashboard link: https://syzkaller.appspot.com/bug?extid=fb7c2dd166d3ea63df2a
compiler:       Debian clang version 22.1.8 (++20260613092233+e80beda6e255-1~exp1~20260613092250.77), Debian LLD 22.1.8

Note: no patches were applied.

       reply	other threads:[~2026-07-21 14:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <DK4AP9HEJ2ZC.13A6XWLH6AK6B@igalia.com>
2026-07-21 14:40 ` syzbot [this message]
     [not found] <DK582SQ6WP0Q.O9P9KPEGWJQ0@igalia.com>
2026-07-22 18:37 ` syzbot
     [not found] <DK3GW1EZ10DD.19P93MSB49ISS@igalia.com>
2026-07-20 15:22 ` syzbot
     [not found] <DK3EXQESFKHR.1JMHKZ0ADMVVR@igalia.com>
2026-07-20 13:53 ` syzbot
2026-06-29 13:06 syzbot
2026-06-30 20:10 ` syzbot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6a5f84c2.42649fcc.22d900.0004.GAE@google.com \
    --to=syzbot+fb7c2dd166d3ea63df2a@syzkaller.appspotmail.com \
    --cc=halves@igalia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome