mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: syzbot <syzbot+b5d7ab56d43de3fd5aac@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
	 syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [input?] possible deadlock in tasklet_action_common (2)
Date: Sat, 25 Jul 2026 20:16:03 -0700	[thread overview]
Message-ID: <6a657bf3.a2ea2cc8.fbad6.0023.GAE@google.com> (raw)
In-Reply-To: <20260726020807.722-1-hdanton@sina.com>

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

000b4600000-0x00000000b8600000] (64MB)
[    6.309562][    T1] ACPI: bus type thunderbolt registered
[    6.377027][   T70] kworker/u8:3 (70) used greatest stack depth: 27600 bytes left
[    6.379001][    T1] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    6.385482][   T71] kworker/u8:4 (71) used greatest stack depth: 26864 bytes left
[    6.443590][    T1] kvm_amd: CPU 0 isn't AMD or Hygon
[    6.443627][    T1] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns
[    6.444316][    T1] clocksource: Switched to clocksource tsc
[    6.521823][   T90] kworker/u8:4 (90) used greatest stack depth: 26464 bytes left
[    6.528340][    T1] Initialise system trusted keyrings
[    6.539063][    T1] workingset: timestamp_bits=40 (anon: 35) max_order=21 bucket_order=0 (anon: 0)
[    6.567689][    T1] DLM installed
[    6.582216][    T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    6.600381][    T1] NFS: Registering the id_resolver key type
[    6.600572][    T1] Key type id_resolver registered
[    6.600588][    T1] Key type id_legacy registered
[    6.601046][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    6.601294][    T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    6.607818][    T1] smbdirect: subsystem loading...
[    6.658888][    T1] smbdirect: subsystem loaded
[    6.689756][    T1] Key type cifs.spnego registered
[    6.690042][    T1] Key type cifs.idmap registered
[    6.714353][    T1] ntfs3: Enabled Linux POSIX ACLs support
[    6.714364][    T1] ntfs3: Read-only LZX/Xpress compression included
[    6.714789][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    6.717535][    T1] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    6.717745][    T1] QNX4 filesystem 0.2.3 registered.
[    6.717904][    T1] qnx6: QNX6 filesystem 1.0.0 registered.
[    6.719175][    T1] fuse: init (API version 7.45)
[    6.777683][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[    6.788433][    T1] orangefs_init: module version upstream loaded
[    6.797450][    T1] JFS: nTxBlock = 8192, nTxLock = 65536
[    6.825598][    T1] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[    6.858402][    T1] 9p: Installing v9fs 9p2000 file system support
[    6.866996][    T1] NILFS version 2 loaded
[    6.867015][    T1] befs: version: 0.9.3
[    6.868718][    T1] ocfs2: Registered cluster interface o2cb
[    6.886839][    T1] ocfs2: Registered cluster interface user
[    6.888383][    T1] OCFS2 User DLM kernel interface loaded
[    6.947010][    T1] gfs2: GFS2 installed
[    6.978529][    T1] ceph: loaded (mds proto 32)
[    7.012563][    T1] NET: Registered PF_ALG protocol family
[    7.013620][    T1] async_tx: api initialized (async)
[    7.013699][    T1] Key type asymmetric registered
[    7.013790][    T1] Asymmetric key parser 'x509' registered
[    7.013807][    T1] Asymmetric key parser 'pkcs8' registered
[    7.013824][    T1] Key type pkcs7_test registered
[    7.015569][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239)
[    7.017819][    T1] io scheduler mq-deadline registered
[    7.017849][    T1] io scheduler kyber registered
[    7.018479][    T1] io scheduler bfq registered
[    7.085666][    T1] raid6: skipped pq benchmark and selected avx2x4
[    7.128877][    T1] input: Power Button as /devices/platform/LNXPWRBN:00/input/input0
[    7.143344][    T1] ACPI: button: Power Button [PWRF]
[    7.148753][    T1] input: Sleep Button as /devices/platform/LNXSLPBN:00/input/input1
[    7.172466][    T1] ACPI: button: Sleep Button [SLPF]
[    7.224406][    T1] ioatdma: Intel(R) QuickData Technology Driver 5.00
[    7.293693][   T10] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    7.294089][   T10] virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
[    7.363984][   T10] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[    7.364224][   T10] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[    7.436996][   T10] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[    7.437156][   T10] virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
[    7.494545][   T10] virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
[    8.725739][    T1] N_HDLC line discipline registered with maxframe=4096
[    8.727756][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    8.754638][    T1] 00:02: ttyS0 I/O:0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    8.791590][    T1] 00:03: ttyS1 I/O:0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    8.826686][    T1] 00:04: ttyS2 I/O:0x3e8 (irq = 6, base_baud = 115200) is a 16550A
[    8.865829][    T1] 00:05: ttyS3 I/O:0x2e8 (irq = 7, base_baud = 115200) is a 16550A
[    8.929462][    T1] Non-volatile memory driver v1.3
[    8.985374][    T1] usbcore: registered new interface driver xillyusb
[    9.004396][    T1] ACPI: bus type drm_connector registered
[    9.023763][    T1] [drm] Initialized vgem 1.0.0 for vgem on minor 0
[    9.037874][    T1] ------------[ cut here ]------------
[    9.037874][    T1] ------------[ cut here ]------------
[    9.037889][    T1] [PLANE:35:plane-0] pixel format with alpha exposed but blend mode not setup
[    9.037911][    T1] WARNING: drivers/gpu/drm/drm_mode_config.c:873 at drm_mode_config_validate+0x1c6d/0x1e60, CPU#1: swapper/0/1
[    9.037976][    T1] Modules linked in:
[    9.038028][    T1] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)} 
[    9.038057][    T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/16/2026
[    9.038079][    T1] RIP: 0010:drm_mode_config_validate+0x1cae/0x1e60
[    9.038109][    T1] Code: 0f 85 ae 00 00 00 4d 8d 77 10 8b 6d 00 4c 89 f0 48 c1 e8 03 80 3c 18 00 74 08 4c 89 f7 e8 ea db ac fc 49 8b 16 4c 89 ef 89 ee <67> 48 0f b9 3a eb 05 e8 b6 16 40 fc 49 bd 00 00 00 00 00 fc ff df
[    9.038132][    T1] RSP: 0000:ffffc90000067810 EFLAGS: 00010246
[    9.038150][    T1] RAX: 1ffff11004bc6a08 RBX: dffffc0000000000 RCX: ffff88801c6f5dc0
[    9.038166][    T1] RDX: ffff888025749980 RSI: 0000000000000023 RDI: ffffffff8fdc6500
[    9.038189][    T1] RBP: 0000000000000023 R08: 0000000000000000 R09: 0000000000000000
[    9.038202][    T1] R10: dffffc0000000000 R11: fffffbfff1fa23b0 R12: dffffc0000000000
[    9.038217][    T1] R13: ffffffff8fdc6500 R14: ffff888025e35040 R15: ffff888025e35030
[    9.038233][    T1] FS:  0000000000000000(0000) GS:ffff888125ae1000(0000) knlGS:0000000000000000
[    9.038251][    T1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    9.038266][    T1] CR2: 0000000000000000 CR3: 000000000e1b0000 CR4: 00000000003526f0
[    9.038284][    T1] Call Trace:
[    9.038293][    T1]  <TASK>
[    9.038317][    T1]  ? debugfs_create_file_full+0x3f/0x60
[    9.038358][    T1]  drm_dev_register+0x7f/0xd80
[    9.038385][    T1]  vkms_create+0x40d/0x4f0
[    9.038415][    T1]  ? __pfx_vkms_init+0x10/0x10
[    9.038445][    T1]  vkms_init+0x57/0x80
[    9.038468][    T1]  do_one_initcall+0x250/0x870
[    9.038496][    T1]  ? __pfx_vkms_init+0x10/0x10
[    9.038521][    T1]  ? __pfx_do_one_initcall+0x10/0x10
[    9.038554][    T1]  ? lapic_next_event+0x11/0x20
[    9.038586][    T1]  ? clockevents_program_event+0x491/0x630
[    9.038616][    T1]  ? __pfx___schedule+0x10/0x10
[    9.038666][    T1]  ? irqentry_exit+0x218/0x8f0
[    9.038699][    T1]  ? lockdep_hardirqs_on+0x7a/0x110
[    9.038732][    T1]  ? irqentry_exit+0x218/0x8f0
[    9.038763][    T1]  ? trace_irq_disable+0x3b/0x140
[    9.038804][    T1]  ? strlen+0x2e/0x70
[    9.038825][    T1]  ? next_arg+0x4a0/0x5e0
[    9.038846][    T1]  ? parameq+0x14d/0x170
[    9.038881][    T1]  ? parse_args+0x9c3/0xad0
[    9.038991][    T1]  ? trace_kmalloc+0x2a/0xf0
[    9.039173][    T1]  ? rcu_is_watching+0x15/0xb0
[    9.039282][    T1]  do_initcall_level+0x10a/0x1a0
[    9.039383][    T1]  ? kernel_init+0x22/0x1d0
[    9.039466][    T1]  do_initcalls+0x59/0xa0
[    9.039663][    T1]  kernel_init_freeable+0x29d/0x3e0
[    9.039697][    T1]  ? __pfx_kernel_init+0x10/0x10
[    9.039725][    T1]  kernel_init+0x22/0x1d0
[    9.039926][    T1]  ? __pfx_kernel_init+0x10/0x10
[    9.040000][    T1]  ret_from_fork+0x514/0xb70
[    9.040097][    T1]  ? __pfx_ret_from_fork+0x10/0x10
[    9.040206][    T1]  ? __switch_to+0xc89/0x1420
[    9.040362][    T1]  ? __pfx_kernel_init+0x10/0x10
[    9.040420][    T1]  ret_from_fork_asm+0x1a/0x30
[    9.040581][    T1]  </TASK>
[    9.040669][    T1] Kernel panic - not syncing: kernel: panic_on_warn set ...
[    9.040725][    T1] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)} 
[    9.040807][    T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/16/2026
[    9.040848][    T1] Call Trace:
[    9.040882][    T1]  <TASK>
[    9.040904][    T1]  vpanic+0x56c/0xa60
[    9.040992][    T1]  ? __pfx__printk+0x10/0x10
[    9.041074][    T1]  ? __pfx_vpanic+0x10/0x10
[    9.041130][    T1]  ? is_bpf_text_address+0x292/0x2b0
[    9.041204][    T1]  ? is_bpf_text_address+0x26/0x2b0
[    9.041339][    T1]  panic+0xc5/0xd0
[    9.041403][    T1]  ? __pfx_panic+0x10/0x10
[    9.041481][    T1]  ? ret_from_fork_asm+0x1a/0x30
[    9.041578][    T1]  __warn+0x315/0x4c0
[    9.041653][    T1]  ? drm_mode_config_validate+0x1c6d/0x1e60
[    9.041739][    T1]  ? drm_mode_config_validate+0x1c6d/0x1e60
[    9.041799][    T1]  __report_bug+0x276/0x570
[    9.041905][    T1]  ? drm_mode_config_validate+0x1c6d/0x1e60
[    9.041986][    T1]  ? __pfx___report_bug+0x10/0x10
[    9.042092][    T1]  ? _raw_spin_unlock_irqrestore+0x30/0x80
[    9.042187][    T1]  ? lockdep_hardirqs_on+0x7a/0x110
[    9.042302][    T1]  ? rt_mutex_slowunlock+0x4ee/0xa20
[    9.042385][    T1]  report_bug_entry+0x19a/0x290
[    9.042480][    T1]  ? drm_mode_config_validate+0x1cae/0x1e60
[    9.042543][    T1]  ? drm_mode_config_validate+0x1cb3/0x1e60
[    9.042614][    T1]  handle_bug+0xce/0x200
[    9.042680][    T1]  exc_invalid_op+0x1a/0x50
[    9.042758][    T1]  asm_exc_invalid_op+0x1a/0x20
[    9.042823][    T1] RIP: 0010:drm_mode_config_validate+0x1cae/0x1e60
[    9.042898][    T1] Code: 0f 85 ae 00 00 00 4d 8d 77 10 8b 6d 00 4c 89 f0 48 c1 e8 03 80 3c 18 00 74 08 4c 89 f7 e8 ea db ac fc 49 8b 16 4c 89 ef 89 ee <67> 48 0f b9 3a eb 05 e8 b6 16 40 fc 49 bd 00 00 00 00 00 fc ff df
[    9.042950][    T1] RSP: 0000:ffffc90000067810 EFLAGS: 00010246
[    9.043010][    T1] RAX: 1ffff11004bc6a08 RBX: dffffc0000000000 RCX: ffff88801c6f5dc0
[    9.043062][    T1] RDX: ffff888025749980 RSI: 0000000000000023 RDI: ffffffff8fdc6500
[    9.043113][    T1] RBP: 0000000000000023 R08: 0000000000000000 R09: 0000000000000000
[    9.043147][    T1] R10: dffffc0000000000 R11: fffffbfff1fa23b0 R12: dffffc0000000000
[    9.043195][    T1] R13: ffffffff8fdc6500 R14: ffff888025e35040 R15: ffff888025e35030
[    9.043316][    T1]  ? debugfs_create_file_full+0x3f/0x60
[    9.043423][    T1]  drm_dev_register+0x7f/0xd80
[    9.043498][    T1]  vkms_create+0x40d/0x4f0
[    9.043593][    T1]  ? __pfx_vkms_init+0x10/0x10
[    9.043664][    T1]  vkms_init+0x57/0x80
[    9.043729][    T1]  do_one_initcall+0x250/0x870
[    9.044094][    T1]  ? __pfx_vkms_init+0x10/0x10
[    9.044118][    T1]  ? __pfx_do_one_initcall+0x10/0x10
[    9.044146][    T1]  ? lapic_next_event+0x11/0x20
[    9.044174][    T1]  ? clockevents_program_event+0x491/0x630
[    9.044199][    T1]  ? __pfx___schedule+0x10/0x10
[    9.044248][    T1]  ? irqentry_exit+0x218/0x8f0
[    9.044343][    T1]  ? lockdep_hardirqs_on+0x7a/0x110
[    9.044442][    T1]  ? irqentry_exit+0x218/0x8f0
[    9.044538][    T1]  ? trace_irq_disable+0x3b/0x140
[    9.044829][    T1]  ? strlen+0x2e/0x70
[    9.044909][    T1]  ? next_arg+0x4a0/0x5e0
[    9.044985][    T1]  ? parameq+0x14d/0x170
[    9.045093][    T1]  ? parse_args+0x9c3/0xad0
[    9.045252][    T1]  ? trace_kmalloc+0x2a/0xf0
[    9.045367][    T1]  ? rcu_is_watching+0x15/0xb0
[    9.045464][    T1]  do_initcall_level+0x10a/0x1a0
[    9.045576][    T1]  ? kernel_init+0x22/0x1d0
[    9.045641][    T1]  do_initcalls+0x59/0xa0
[    9.045737][    T1]  kernel_init_freeable+0x29d/0x3e0
[    9.045822][    T1]  ? __pfx_kernel_init+0x10/0x10
[    9.045927][    T1]  kernel_init+0x22/0x1d0
[    9.045999][    T1]  ? __pfx_kernel_init+0x10/0x10
[    9.046085][    T1]  ret_from_fork+0x514/0xb70
[    9.046377][    T1]  ? __pfx_ret_from_fork+0x10/0x10
[    9.046408][    T1]  ? __switch_to+0xc89/0x1420
[    9.046436][    T1]  ? __pfx_kernel_init+0x10/0x10
[    9.046461][    T1]  ret_from_fork_asm+0x1a/0x30
[    9.046513][    T1]  </TASK>
[    9.047284][    T1] Kernel Offset: disabled


syzkaller build log:
go env (err=<nil>)
AR='ar'
CC='gcc'
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_ENABLED='1'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
CXX='g++'
GCCGO='gccgo'
GO111MODULE='auto'
GOAMD64='v1'
GOARCH='amd64'
GOAUTH='netrc'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOCACHEPROG=''
GODEBUG=''
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFIPS140='off'
GOFLAGS=''
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build2961944591=/tmp/go-build -gno-record-gcc-switches'
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMOD='/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs-2/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTELEMETRY='local'
GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.26.0'
GOWORK=''
PKG_CONFIG='pkg-config'

git status (err=<nil>)
HEAD detached at 492bab153d
nothing to commit, working tree clean


tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=492bab153dea5e0e414bd0bbf60c3871267255ed -X github.com/google/syzkaller/prog.gitRevisionDate=20260724-151452"  ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=492bab153dea5e0e414bd0bbf60c3871267255ed -X github.com/google/syzkaller/prog.gitRevisionDate=20260724-151452"  ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=492bab153dea5e0e414bd0bbf60c3871267255ed -X github.com/google/syzkaller/prog.gitRevisionDate=20260724-151452"  -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
mkdir -p ./bin/linux_amd64
g++ -o ./bin/linux_amd64/syz-executor executor/executor.cc \
	-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -std=c++17 -I. -Iexecutor/_include   -DGOOS_linux=1 -DGOARCH_amd64=1 \
	-DHOSTGOOS_linux=1 -DGIT_REVISION=\"492bab153dea5e0e414bd0bbf60c3871267255ed\"
/usr/bin/ld: /tmp/ccHTRlOp.o: in function `Connection::Connect(char const*, char const*)':
executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x386): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
./tools/check-syzos.sh 2>/dev/null


Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=177c909e580000


Tested on:

commit:         9eebf259 Add linux-next specific files for 20260723
git tree:       linux-next
kernel config:  https://syzkaller.appspot.com/x/.config?x=76133f44547cb4b0
dashboard link: https://syzkaller.appspot.com/bug?extid=b5d7ab56d43de3fd5aac
compiler:       Debian clang version 22.1.8 (++20260613092233+e80beda6e255-1~exp1~20260613092250.77), Debian LLD 22.1.8
patch:          https://syzkaller.appspot.com/x/patch.diff?x=16ebb2ea580000


  reply	other threads:[~2026-07-26  3:16 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-20 17:05 syzbot
2026-05-21  1:52 ` Hillf Danton
2026-05-21 14:34   ` Sebastian Andrzej Siewior
2026-05-21 22:35     ` Hillf Danton
2026-05-22  6:39       ` Sebastian Andrzej Siewior
2026-05-22  7:21         ` Hillf Danton
2026-05-22  7:35           ` Sebastian Andrzej Siewior
2026-05-24  0:45             ` Hillf Danton
2026-07-26  0:38 ` syzbot
2026-07-26  2:07   ` Hillf Danton
2026-07-26  3:16     ` syzbot [this message]
2026-07-26  4:11   ` Hillf Danton
2026-07-26  4:47     ` syzbot
2026-07-28 10:31 ` Forwarded: " syzbot
     [not found] <CAJWNTGzO5GGF4X0_QM_XdF=L_Q9mPxtZyrthe8nKKeD5qtqpYQ@mail.gmail.com>
2026-07-28 11:25 ` syzbot
2026-07-28 11:56   ` Pimyn Girgis
2026-07-28 13:23     ` syzbot
2026-07-28 13:38       ` Pimyn Girgis
2026-07-28 14:56         ` syzbot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6a657bf3.a2ea2cc8.fbad6.0023.GAE@google.com \
    --to=syzbot+b5d7ab56d43de3fd5aac@syzkaller.appspotmail.com \
    --cc=hdanton@sina.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®