mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Jiacheng Xu" <stitch@zju.edu.cn>
To: "Andreas Gruenbacher" <agruenba@redhat.com>
Cc: gfs2@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/5] gfs2: protect sysfs callbacks from superblock teardown
Date: Fri, 21 Aug 2026 12:09:21 +0800 (GMT+08:00)	[thread overview]
Message-ID: <6a91508.162bd.1a0228251e8.Coremail.stitch@zju.edu.cn> (raw)
In-Reply-To: <dae9f1e.152f1.1a018d2dd73.Coremail.stitch@zju.edu.cn>

The GFS2 sysfs files become visible before fill_super() completes and
remain present until after filesystem resources have been released.
Consequently, callbacks that access quota, statfs, glock or journal
state can race with mount failure rollback or unmount teardown.

The quota refresh fix was originally sent as a standalone [PATCH]. This
version folds it into a complete series and adds the corresponding
lifetime protection for the other affected sysfs callbacks.

All callbacks use down_read_trylock() on s_umount and verify SB_ACTIVE.
Returning -EAGAIN avoids deadlock when mount failure or unmount holds
the write side of s_umount while removing the sysfs files.

Changes in v2:
- Folded the original quota refresh fix into a five-patch series.
- Added statfs_sync, quota_sync, demote_rq and status fixes.

Jiacheng Xu (5):
  gfs2: protect quota refresh from superblock teardown
  gfs2: protect statfs sync sysfs callback
  gfs2: protect quota sync sysfs callback
  gfs2: protect demote requests during superblock teardown
  gfs2: protect status sysfs reads during teardown

 fs/gfs2/quota.c | 19 ++++++++++++++-
 fs/gfs2/sys.c   | 65 +++++++++++++++++++++++++++++++++++++++++++------
 2 files changed, 76 insertions(+), 8 deletions(-)


base-commit: 0f23d56f17fdfc7db69d51f64c8b91bbab947aa9
-- 
2.25.1

> -----原始邮件-----
> 发件人: "Jiacheng Xu" <stitch@zju.edu.cn>
> 发送时间:2026-08-19 15:01:07 (星期三)
> 收件人: "Andreas Gruenbacher" <agruenba@redhat.com>
> 抄送: gfs2@lists.linux.dev, linux-kernel@vger.kernel.org
> 主题: [PATCH] gfs2: Fix NULL pointer dereference in quota refresh
> 
> The GFS2 sysfs files are registered before init_inodes() completes.
> Consequently, the quota_refresh_user and quota_refresh_group sysfs
> attributes can be accessed while sdp->sd_quota_inode has not been
> initialized yet.
> 
> A concurrent write to quota_refresh_user may then call do_glock(), which
> dereferences sdp->sd_quota_inode. This can result in a NULL pointer dereference 
> in do_glock(). The same callback can also race with superblock
> teardown and access data after the filesystem has started to shut down.
> 
> Moving sysfs registration after init_inodes() would avoid the initialization
> window, but is not suitable because the lock manager may need the GFS2
> sysfs files during the remaining mount sequence.
> 
> Serialize gfs2_quota_refresh() with the superblock lifetime instead.
> Acquire s_umount for reading before accessing quota data. Mount failure and
> unmount paths hold s_umount for writing, so this prevents the callback from
> running while the superblock is being initialized or destroyed.
> 
> Use down_read_trylock() instead of down_read() because the mount failure
> path may already hold s_umount for writing while removing the sysfs files.
> Returning -EAGAIN allows the sysfs write to fail without introducing a
> deadlock.
> 
> Also verify SB_ACTIVE after acquiring the read lock, since the sysfs
> attributes become visible before the superblock is fully active.
> 
> The reproducer of the issue is attached. After applying this patch, 
> the reproducer no longer triggers the kernel crash. 
> 
> Signed-off-by: Jiacheng Xu <stitch@zju.edu.cn>
> Tested-by: Jiacheng Xu <stitch@zju.edu.cn>
> ---
> fs/gfs2/quota.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
> 
> diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
> index 001c8b39ca55..d50534ed9379 100644
> --- a/fs/gfs2/quota.c
> +++ b/fs/gfs2/quota.c
> @@ -1384,19 +1384,36 @@ int gfs2_quota_sync(struct super_block *sb, int type)
> 
> int gfs2_quota_refresh(struct gfs2_sbd *sdp, struct kqid qid)
> {
> +     struct super_block *sb = sdp->sd_vfs;
>       struct gfs2_quota_data *qd;
>       struct gfs2_holder q_gh;
>       int error;
> 
> +     /*
> +      * The sysfs files are created before fill_super completes. Avoid
> +      * blocking on s_umount because the mount failure path removes the
> +      * sysfs files while holding it for writing.
> +      */
> +     if (!down_read_trylock(&sb->s_umount))
> +             return -EAGAIN;
> +
> +     if (!(sb->s_flags & SB_ACTIVE)) {
> +             error = -EAGAIN;
> +             goto out_unlock;
> +     }
> +
>       error = qd_get(sdp, qid, &qd);
>       if (error)
> -             return error;
> +             goto out_unlock;
> 
>       error = do_glock(qd, FORCE, &q_gh);
>       if (!error)
>             gfs2_glock_dq_uninit(&q_gh);
> 
>       qd_put(qd);
> 
> +out_unlock:
> +     up_read(&sb->s_umount);
>       return error;
> }

  reply	other threads:[~2026-08-21  4:09 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-19  7:01 [PATCH] gfs2: Fix NULL pointer dereference in quota refresh Jiacheng Xu
2026-08-21  4:09 ` Jiacheng Xu [this message]
2026-08-21  4:11   ` [PATCH v2 1/5] gfs2: protect quota refresh from superblock teardown Jiacheng Xu
2026-08-21  4:14   ` [PATCH v2 2/5] gfs2: protect statfs sync sysfs callback Jiacheng Xu
2026-08-21  4:14   ` [PATCH v2 3/5] gfs2: protect quota " Jiacheng Xu
2026-08-21  4:15   ` [PATCH v2 4/5] gfs2: protect demote requests during superblock Jiacheng Xu
2026-08-21  4:16   ` [PATCH v2 5/5] gfs2: protect status sysfs reads during teardown Jiacheng Xu
2026-08-27 19:16 ` [PATCH v2 0/5] gfs2: protect sysfs callbacks from superblock teardown Andreas Gruenbacher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6a91508.162bd.1a0228251e8.Coremail.stitch@zju.edu.cn \
    --to=stitch@zju.edu.cn \
    --cc=agruenba@redhat.com \
    --cc=gfs2@lists.linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®