From: syzbot <syzbot+9ca2c9f85bd8b5e46516@syzkaller.appspotmail.com>
To: linux-kernel@vger.kernel.org, syzkaller-bugs@googlegroups.com
Subject: Forwarded: Re: [syzbot] [usb?] INFO: task hung in usbatm_usb_disconnect (2)
Date: Wed, 23 Sep 2026 16:25:55 -0700 [thread overview]
Message-ID: <6ab46003.80e1c6cc.1e8e5f.0005.GAE@google.com> (raw)
In-Reply-To: <6ab152fc.71f81b7d.15fa6d.002f.GAE@google.com>
For archival purposes, forwarding an incoming command email to
linux-kernel@vger.kernel.org, syzkaller-bugs@googlegroups.com.
***
Subject: Re: [syzbot] [usb?] INFO: task hung in usbatm_usb_disconnect (2)
Author: valigurasm@gmail.com
#syz test: upstream master
On Thu, 24 Sept 2026, 01:01 syzbot, <
syzbot+9ca2c9f85bd8b5e46516@syzkaller.appspotmail.com> wrote:
> Hello,
>
> syzbot tried to test the proposed patch but the build/boot failed:
>
> lost connection to test machine
>
>
>
> Warning: Permanently added '10.128.1.106' (ED25519) to the list of known
> hosts.
> 2026/09/23 21:58:53 parsed 1 programs
> 2026/09/23 21:58:53 serving rpc on tcp://36741
> [ 108.303160][ T923] cfg80211: failed to load regulatory.db
> [ 112.594660][ T5628] cgroup: Unknown subsys name 'net'
> [ 112.732732][ T5628] cgroup: Unknown subsys name 'cpuset'
> [ 112.746517][ T5628] cgroup: Unknown subsys name 'rlimit'
> Setting up swapspace version 1, size = 127995904 bytes
> [ 114.653895][ T5628] Adding 124996k swap on ./swap-file. Priority:0
> extents:1 across:124996k
> [ 118.241459][ T5649] soft_limit_in_bytes is deprecated and will be
> removed. Writing any value to this file has no effect. Please report your
> usecase to linux-mm@kvack.org if you depend on this functionality.
> [ 118.312791][ T5649] ebtables: xtables 32bit compat interface no longer
> supported in namespaces and will be removed soon.
> [ 118.342551][ T5649] arp_tables: xtables 32bit compat interface no
> longer supported in namespaces and will be removed soon.
> [ 118.935095][ T1161] wlan0: Created IBSS using preconfigured BSSID
> 50:50:50:50:50:50
> [ 118.935132][ T1161] wlan0: Creating new IBSS network, BSSID
> 50:50:50:50:50:50
> [ 119.314186][ T60] wlan1: Created IBSS using preconfigured BSSID
> 50:50:50:50:50:50
> [ 119.314208][ T60] wlan1: Creating new IBSS network, BSSID
> 50:50:50:50:50:50
> [ 119.514008][ T5659] ip_tables: xtables 32bit compat interface no longer
> supported in namespaces and will be removed soon.
> [ 119.514671][ T5659] ip6_tables: xtables 32bit compat interface no
> longer supported in namespaces and will be removed soon.
> [ 120.499036][ T5685] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 >
> 1
> [ 120.504897][ T5685] Bluetooth: hci0: unexpected cc 0x1003 length: 249 >
> 9
> [ 120.505931][ T5685] Bluetooth: hci0: unexpected cc 0x1001 length: 249 >
> 9
> [ 120.507278][ T5685] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 >
> 4
> [ 120.541791][ T5685] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 >
> 2
> [ 122.840866][ T5680] bridge0: port 1(bridge_slave_0) entered blocking
> state
> [ 122.841743][ T5680] bridge0: port 1(bridge_slave_0) entered disabled
> state
> [ 122.842082][ T5680] bridge_slave_0: entered allmulticast mode
> [ 122.862531][ T5680] bridge_slave_0: entered promiscuous mode
> [ 122.889547][ T5680] bridge0: port 2(bridge_slave_1) entered blocking
> state
> [ 122.889656][ T5680] bridge0: port 2(bridge_slave_1) entered disabled
> state
> [ 122.889794][ T5680] bridge_slave_1: entered allmulticast mode
> [ 122.891937][ T5680] bridge_slave_1: entered promiscuous mode
> [ 122.984739][ T5680] bond0: (slave bond_slave_0): Enslaving as an active
> interface with an up link
> [ 123.001661][ T5680] bond0: (slave bond_slave_1): Enslaving as an active
> interface with an up link
> [ 123.051936][ T5680] team0: Port device team_slave_0 added
> [ 123.055615][ T5680] team0: Port device team_slave_1 added
> [ 123.112267][ T5680] batman_adv: batadv0: Adding interface:
> batadv_slave_0
> [ 123.112288][ T5680] batman_adv: batadv0: The MTU of interface
> batadv_slave_0 is too small (1500) to handle the transport of batman-adv
> packets. Packets going over this interface will be fragmented on layer2
> which could impact the performance. Setting the MTU to 1532 would solve the
> problem.
> [ 123.112327][ T5680] batman_adv: batadv0: Not using interface
> batadv_slave_0 (retrying later): interface not active
> [ 123.116516][ T5680] batman_adv: batadv0: Adding interface:
> batadv_slave_1
> [ 123.116534][ T5680] batman_adv: batadv0: The MTU of interface
> batadv_slave_1 is too small (1500) to handle the transport of batman-adv
> packets. Packets going over this interface will be fragmented on layer2
> which could impact the performance. Setting the MTU to 1532 would solve the
> problem.
> [ 123.116558][ T5680] batman_adv: batadv0: Not using interface
> batadv_slave_1 (retrying later): interface not active
> [ 123.261249][ T5680] hsr_slave_0: entered promiscuous mode
> [ 123.262263][ T5680] hsr_slave_1: entered promiscuous mode
> [ 123.471857][ T5680] netdevsim netdevsim8 netdevsim0: renamed from eth0
> [ 123.487856][ T5680] 8021q: adding VLAN 0 to HW filter on device
> netdevsim0
> [ 123.489120][ T5680] netdevsim netdevsim8 netdevsim1: renamed from eth1
> [ 123.493156][ T5680] 8021q: adding VLAN 0 to HW filter on device
> netdevsim1
> [ 123.494176][ T5680] netdevsim netdevsim8 netdevsim2: renamed from eth2
> [ 123.504829][ T5680] 8021q: adding VLAN 0 to HW filter on device
> netdevsim2
> [ 123.507973][ T5680] netdevsim netdevsim8 netdevsim3: renamed from eth3
> [ 123.548418][ T5680] 8021q: adding VLAN 0 to HW filter on device
> netdevsim3
> [ 123.652099][ T5680] 8021q: adding VLAN 0 to HW filter on device bond0
> [ 123.685093][ T5680] 8021q: adding VLAN 0 to HW filter on device team0
> [ 123.702139][ T60] bridge0: port 1(bridge_slave_0) entered blocking
> state
> [ 123.702279][ T60] bridge0: port 1(bridge_slave_0) entered forwarding
> state
> [ 123.730774][ T78] bridge0: port 2(bridge_slave_1) entered blocking
> state
> [ 123.730885][ T78] bridge0: port 2(bridge_slave_1) entered forwarding
> state
> [ 124.170694][ T5680] 8021q: adding VLAN 0 to HW filter on device batadv0
> [ 124.430316][ T5680] veth0_vlan: entered promiscuous mode
> [ 124.447342][ T5680] veth1_vlan: entered promiscuous mode
> [ 124.488229][ T5680] veth0_macvtap: entered promiscuous mode
> [ 124.492929][ T5680] veth1_macvtap: entered promiscuous mode
> [ 124.527631][ T5680] batman_adv: batadv0: Interface activated:
> batadv_slave_0
> [ 124.540115][ T5680] batman_adv: batadv0: Interface activated:
> batadv_slave_1
> execution of simple program fails: NOTFAIL: arptable checkpoint:
> getsockopt(ARPT_SO_GET_ENTRIES) failed. table=filter (errno 22: Invalid
> argument).
> [ 124.647568][ T1161] netdevsim netdevsim8 netdevsim0: set [1, 0] type 2
> family 0 port 6081 - 0
> [ 124.647619][ T1161] netdevsim netdevsim8 netdevsim1: set [1, 0] type 2
> family 0 port 6081 - 0
> [ 124.647655][ T1161] netdevsim netdevsim8 netdevsim2: set [1, 0] type 2
> family 0 port 6081 - 0
> [ 124.647690][ T1161] netdevsim netdevsim8 netdevsim3: set [1, 0] type 2
> family 0 port 6081 - 0
> [ 124.806492][ T1161] netdevsim netdevsim8 netdevsim3 (unregistering):
> unset [1, 0] type 2 family 0 port 6081 - 0
> [ 124.903314][ T1161] netdevsim netdevsim8 netdevsim2 (unregistering):
> unset [1, 0] type 2 family 0 port 6081 - 0
> [ 124.980877][ T1161] netdevsim netdevsim8 netdevsim1 (unregistering):
> unset [1, 0] type 2 family 0 port 6081 - 0
> [ 125.116872][ T1161] netdevsim netdevsim8 netdevsim0 (unregistering):
> unset [1, 0] type 2 family 0 port 6081 - 0
> [ 125.883310][ T1161] bridge_slave_1: left allmulticast mode
> [ 125.883361][ T1161] bridge_slave_1: left promiscuous mode
> [ 125.884401][ T1161] bridge0: port 2(bridge_slave_1) entered disabled
> state
> [ 125.920237][ T1161] bridge_slave_0: left allmulticast mode
> [ 125.920268][ T1161] bridge_slave_0: left promiscuous mode
> [ 125.920607][ T1161] bridge0: port 1(bridge_slave_0) entered disabled
> state
> [ 126.095488][ T1161] bond0 (unregistering): (slave bond_slave_0):
> Releasing backup interface
> [ 126.110922][ T1161] bond0 (unregistering): (slave bond_slave_1):
> Releasing backup interface
> [ 126.112236][ T1161] bond0 (unregistering): Released all slaves
> [ 126.223248][ T1161] hsr_slave_0: left promiscuous mode
> [ 126.226835][ T1161] hsr_slave_1: left promiscuous mode
> [ 126.233387][ T1161] batman_adv: batadv0: Interface deactivated:
> batadv_slave_0
> [ 126.233431][ T1161] batman_adv: batadv0: Removing interface:
> batadv_slave_0
> [ 126.241512][ T1161] batman_adv: batadv0: Interface deactivated:
> batadv_slave_1
> [ 126.241585][ T1161] batman_adv: batadv0: Removing interface:
> batadv_slave_1
> [ 126.286396][ T1161] veth1_macvtap: left promiscuous mode
> [ 126.286461][ T1161] veth0_macvtap: left promiscuous mode
> [ 126.286648][ T1161] veth1_vlan: left promiscuous mode
> [ 126.286760][ T1161] veth0_vlan: left promiscuous mode
> [ 126.654559][ T1161] team0 (unregistering): Port device team_slave_1
> removed
> [ 126.682089][ T1161] team0 (unregistering): Port device team_slave_0
> removed
> [ 126.875676][ T5279] 8021q: adding VLAN 0 to HW filter on device eth1
> [ 127.409335][ T5279] 8021q: adding VLAN 0 to HW filter on device eth2
> [ 127.993497][ T5279] 8021q: adding VLAN 0 to HW filter on device eth3
> [ 128.438182][ T5279] 8021q: adding VLAN 0 to HW filter on device eth4
> [ 139.019729][ T1313] ieee802154 phy0 wpan0: encryption failed: -22
> [ 139.019831][ T1313] ieee802154 phy1 wpan1: encryption failed: -22
>
>
> syzkaller build log:
> go env (err=<nil>)
> AR='ar'
> CC='gcc'
> CGO_CFLAGS='-O2 -g'
> CGO_CPPFLAGS=''
> CGO_CXXFLAGS='-O2 -g'
> CGO_ENABLED='1'
> CGO_FFLAGS='-O2 -g'
> CGO_LDFLAGS='-O2 -g'
> CXX='g++'
> GCCGO='gccgo'
> GO111MODULE='auto'
> GOAMD64='v1'
> GOARCH='amd64'
> GOAUTH='netrc'
> GOBIN=''
> GOCACHE='/syzkaller/.cache/go-build'
> GOCACHEPROG=''
> GODEBUG=''
> GOENV='/syzkaller/.config/go/env'
> GOEXE=''
> GOEXPERIMENT=''
> GOFIPS140='off'
> GOFLAGS=''
> GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0
> -ffile-prefix-map=/tmp/go-build3081947690=/tmp/go-build
> -gno-record-gcc-switches'
> GOHOSTARCH='amd64'
> GOHOSTOS='linux'
> GOINSECURE=''
> GOMOD='/syzkaller/jobs-2/linux/gopath/src/
> github.com/google/syzkaller/go.mod'
> GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
> GONOPROXY=''
> GONOSUMDB=''
> GOOS='linux'
> GOPATH='/syzkaller/jobs-2/linux/gopath'
> GOPRIVATE=''
> GOPROXY='https://proxy.golang.org,direct'
> GOROOT='/usr/local/go'
> GOSUMDB='sum.golang.org'
> GOTELEMETRY='local'
> GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
> GOTMPDIR=''
> GOTOOLCHAIN='auto'
> GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
> GOVCS=''
> GOVERSION='go1.26.0'
> GOWORK=''
> PKG_CONFIG='pkg-config'
>
> git status (err=<nil>)
> HEAD detached at 853b104bb45
> nothing to commit, working tree clean
>
>
> tput: No value for $TERM and no -T specified
> tput: No value for $TERM and no -T specified
> Makefile:31: run command via tools/syz-env for best compatibility, see:
> Makefile:32:
> https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
> go list -f '{{.Stale}}' -ldflags="-s -w -X
> github.com/google/syzkaller/prog.GitRevision=853b104bb454141a5b0fc0e4218ec78e9f34ffb1
> -X github.com/google/syzkaller/prog.gitRevisionDate=20260918-062331"
> ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X
> github.com/google/syzkaller/prog.GitRevision=853b104bb454141a5b0fc0e4218ec78e9f34ffb1
> -X github.com/google/syzkaller/prog.gitRevisionDate=20260918-062331"
> ./sys/syz-sysgen
> make .descriptions
> tput: No value for $TERM and no -T specified
> tput: No value for $TERM and no -T specified
> Makefile:31: run command via tools/syz-env for best compatibility, see:
> Makefile:32:
> https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
> bin/syz-sysgen
> <https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-envbin/syz-sysgen>
> touch .descriptions
> GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X
> github.com/google/syzkaller/prog.GitRevision=853b104bb454141a5b0fc0e4218ec78e9f34ffb1
> -X github.com/google/syzkaller/prog.gitRevisionDate=20260918-062331" -o
> ./bin/linux_amd64/syz-execprog
> github.com/google/syzkaller/tools/syz-execprog
> mkdir -p ./bin/linux_386
> x86_64-linux-gnu-g++ -o ./bin/linux_386/syz-executor executor/executor.cc \
> -m32 -O2 -pthread -Wall -Werror -Wparentheses
> -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow
> -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable
> -Wno-unused-command-line-argument -static-pie -std=c++17 -I.
> -Iexecutor/_include -DGOOS_linux=1 -DGOARCH_386=1 \
> -DHOSTGOOS_linux=1
> -DGIT_REVISION=\"853b104bb454141a5b0fc0e4218ec78e9f34ffb1\"
> /usr/bin/ld: /tmp/cctVKtvW.o: in function `Connection::Connect(char
> const*, char const*)':
> executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x145):
> warning: Using 'gethostbyname' in statically linked applications requires
> at runtime the shared libraries from the glibc version used for linking
> ./tools/check-syzos.sh 2>/dev/null
> [INFO] Unsupported architecture '386', skipping check.
>
>
>
> Tested on:
>
> commit: fe2ec837 Merge tag 'hid-for-linus-2026092202' of git:/..
> git tree: upstream
> kernel config: https://syzkaller.appspot.com/x/.config?x=9d4242cb1c54cdf7
> dashboard link:
> https://syzkaller.appspot.com/bug?extid=9ca2c9f85bd8b5e46516
> compiler: Debian clang version 22.1.8
> (++20260613092233+e80beda6e255-1~exp1~20260613092250.77), Debian LLD 22.1.8
> userspace arch: i386
> patch:
> https://syzkaller.appspot.com/x/patch.diff?x=11123405580000
>
>
prev parent reply other threads:[~2026-09-23 23:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-21 15:53 syzbot
2026-09-23 19:27 ` Forwarded: #syz test: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master syzbot
2026-09-23 23:25 ` syzbot [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6ab46003.80e1c6cc.1e8e5f.0005.GAE@google.com \
--to=syzbot+9ca2c9f85bd8b5e46516@syzkaller.appspotmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®