From: Eddie James <eajames@linux.vnet.ibm.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: jdelvare@suse.com, linux-hwmon@vger.kernel.org,
linux-kernel@vger.kernel.org, andrew@aj.id.au,
"Edward A. James" <eajames@us.ibm.com>
Subject: Re: [prefix=PATCH] drivers: pmbus: core: Prevent calling pmbus_set_page with negative page
Date: Wed, 25 Oct 2017 16:23:01 -0500 [thread overview]
Message-ID: <6ad453dc-5d89-4ac8-a379-b5cd3a7b1bbd@linux.vnet.ibm.com> (raw)
In-Reply-To: <20171025211234.GA3273@roeck-us.net>
On 10/25/2017 04:12 PM, Guenter Roeck wrote:
> On Wed, Oct 25, 2017 at 02:52:53PM -0500, Eddie James wrote:
>> From: "Edward A. James" <eajames@us.ibm.com>
>>
>> For devices with word data registers, the pmbus core may call read/write
>> word data functions with a page value of -1, in order to perform the
>> operation without setting the page. However, the read/write word data
>> functions accept only unsigned 8-bit page numbers, resulting in setting
>> a page of 0xFF in this situation. This may result in errors or undefined
>> behavior of some devices (specifically the ir35221, which allows the
>> page to be set to 0xFF, but some subsequent operations to read registers
>> may fail).
>>
> Good catch.
>
> Subject came off a bit odd.
>
> [prefix=PATCH] drivers: pmbus: core: Prevent ...
>
> Please use "[PATCH] hwmon: (pmbus/core) Prevent ..."
Yea I hit = instead of - in "--subject-prefix"...
>
> This me wonder if we should move the check into pmbus_set_page()
> instead.
>
> int pmbus_set_page(struct i2c_client *client, int page)
> {
> ...
> if (page >= 0 && page != data->currpage) {
> ...
> }
>
> What do you think ?
Yea that works well too, and reduces the code size. Though I suppose it
makes the interface slightly less intuitive, as someone might think they
can pass a value larger than u8. At least for the read/write functions,
a negative value has a meaning - "don't change the page."
Up to you, either way. I'm happy to change it.
Thanks,
Eddie
>
> Thanks,
> Guenter
>
>> Signed-off-by: Edward A. James <eajames@us.ibm.com>
>> ---
>> drivers/hwmon/pmbus/pmbus.h | 4 ++--
>> drivers/hwmon/pmbus/pmbus_core.c | 29 ++++++++++++++++++-----------
>> 2 files changed, 20 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
>> index 4efa2bd..4a16da6 100644
>> --- a/drivers/hwmon/pmbus/pmbus.h
>> +++ b/drivers/hwmon/pmbus/pmbus.h
>> @@ -405,8 +405,8 @@ struct pmbus_driver_info {
>>
>> void pmbus_clear_cache(struct i2c_client *client);
>> int pmbus_set_page(struct i2c_client *client, u8 page);
>> -int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
>> -int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word);
>> +int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg);
>> +int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg, u16 word);
>> int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
>> int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
>> int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
>> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
>> index 302f0ae..6d6e030 100644
>> --- a/drivers/hwmon/pmbus/pmbus_core.c
>> +++ b/drivers/hwmon/pmbus/pmbus_core.c
>> @@ -186,13 +186,16 @@ static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value)
>> return pmbus_write_byte(client, page, value);
>> }
>>
>> -int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word)
>> +int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
>> + u16 word)
>> {
>> int rv;
>>
>> - rv = pmbus_set_page(client, page);
>> - if (rv < 0)
>> - return rv;
>> + if (page >= 0) {
>> + rv = pmbus_set_page(client, page);
>> + if (rv < 0)
>> + return rv;
>> + }
>>
>> return i2c_smbus_write_word_data(client, reg, word);
>> }
>> @@ -219,13 +222,15 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
>> return pmbus_write_word_data(client, page, reg, word);
>> }
>>
>> -int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg)
>> +int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg)
>> {
>> int rv;
>>
>> - rv = pmbus_set_page(client, page);
>> - if (rv < 0)
>> - return rv;
>> + if (page >= 0) {
>> + rv = pmbus_set_page(client, page);
>> + if (rv < 0)
>> + return rv;
>> + }
>>
>> return i2c_smbus_read_word_data(client, reg);
>> }
>> @@ -269,9 +274,11 @@ int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
>> {
>> int rv;
>>
>> - rv = pmbus_set_page(client, page);
>> - if (rv < 0)
>> - return rv;
>> + if (page >= 0) {
>> + rv = pmbus_set_page(client, page);
>> + if (rv < 0)
>> + return rv;
>> + }
>>
>> return i2c_smbus_write_byte_data(client, reg, value);
>> }
>> --
>> 1.8.3.1
>>
next prev parent reply other threads:[~2017-10-25 21:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 19:52 Eddie James
2017-10-25 21:12 ` Guenter Roeck
2017-10-25 21:23 ` Eddie James [this message]
2017-10-25 22:08 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6ad453dc-5d89-4ac8-a379-b5cd3a7b1bbd@linux.vnet.ibm.com \
--to=eajames@linux.vnet.ibm.com \
--cc=andrew@aj.id.au \
--cc=eajames@us.ibm.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome