mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Adam Ford <aford173@gmail.com>, dri-devel@lists.freedesktop.org
Cc: aford@beaconembedded.com, quic_abhinavk@quicinc.com,
	Andrzej Hajda <andrzej.hajda@intel.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <rfoss@kernel.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drm/bridge: adv7533: Fix adv7533_mode_valid for adv7533 and adv7535
Date: Sun, 12 Mar 2023 03:10:10 +0200	[thread overview]
Message-ID: <6ae67215-28b6-04bf-b61d-1ba99ffdf6fb@linaro.org> (raw)
In-Reply-To: <20230311231007.46174-1-aford173@gmail.com>

On 12/03/2023 01:10, Adam Ford wrote:
> When dynamically switching lanes was removed, the intent of the code
> was to check to make sure that higher speed items used 4 lanes, but
> it had the unintended consequence of removing the slower speeds for
> 4-lane users.
> 
> This attempts to remedy this by doing a check to see that the
> max frequency doesn't exceed the chip limit, and a second
> check to make sure that the max bit-rate doesn't exceed the
> number of lanes * max bit rate / lane.
> 
> Fixes: 9a0cdcd6649b ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge")
> 

Please remove the empty line here. There should be no empty lines 
between the tags


> Signed-off-by: Adam Ford <aford173@gmail.com>
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
> index fdfeadcefe80..10a112d36945 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
> @@ -103,13 +103,9 @@ void adv7533_dsi_power_off(struct adv7511 *adv)
>   enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
>   					const struct drm_display_mode *mode)
>   {
> -	int lanes;
> +	unsigned long max_lane_freq;
>   	struct mipi_dsi_device *dsi = adv->dsi;
> -
> -	if (mode->clock > 80000)
> -		lanes = 4;
> -	else
> -		lanes = 3;
> +	u8 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
>   
>   	/*
>   	 * TODO: add support for dynamic switching of lanes

Drop the comment please. It makes little sense with your new implementation.

> @@ -117,8 +113,16 @@ enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
>   	 * out the modes which shall need different number of lanes
>   	 * than what was configured in the device tree.
>   	 */
> -	if (lanes != dsi->lanes)
> -		return MODE_BAD;
> +
> +	/* Check max clock for either 7533 or 7535 */
> +	if (mode->clock > (adv->type == ADV7533 ? 80000 : 148500))
> +		return MODE_CLOCK_HIGH;
> +
> +	/* Check max clock for each lane */
> +	max_lane_freq = (adv->type == ADV7533 ? 800000 : 891000);
> +
> +	if (mode->clock * bpp > max_lane_freq * adv->num_dsi_lanes)
> +		return MODE_CLOCK_HIGH;
>   
>   	return MODE_OK;
>   }

-- 
With best wishes
Dmitry


  reply	other threads:[~2023-03-12  1:10 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-11 23:10 Adam Ford
2023-03-12  1:10 ` Dmitry Baryshkov [this message]
2023-03-13 13:56   ` Robert Foss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6ae67215-28b6-04bf-b61d-1ba99ffdf6fb@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=aford173@gmail.com \
    --cc=aford@beaconembedded.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=linux-kernel@vger.kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=rfoss@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®