From: "jiale yao" <19888972804@163.com>
To: "Sudeep Holla" <sudeep.holla@kernel.org>
Cc: "Jassi Brar" <jassisinghbrar@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Arnd Bergmann" <arnd@arndb.de>,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re:Re: [PATCH v2] mailbox: pcc: validate PCCT subspaces before parsing
Date: Tue, 27 Oct 2026 14:50:49 +0800 (CST) [thread overview]
Message-ID: <6b05ec89.55fd.1a17c203cd6.Coremail.19888972804@163.com> (raw)
In-Reply-To: <20261023-invincible-satisfied-dragon-c3dc50@sudeepholla>
At 2026-10-23 22:24:28, "Sudeep Holla" <sudeep.holla@kernel.org> wrote:
>(For some reason you domain gets blocked for me, so please wait until
>I check response manually on lore)
>
>On Fri, Oct 23, 2026 at 05:38:39PM +0800, Jiale Yao wrote:
>> The PCC mailbox probe walks PCCT entries by their declared lengths
>> without checking that each entry is contained in the table. It also
>> passes generic headers to type-specific parsers without establishing the
>> required record size. Malformed firmware can therefore move the cursor
>> outside the PCCT or cause out-of-bounds field reads.
>>
>> Validate the table header, each subspace range, and the minimum size for
>> supported subspace types during both the counting and probe passes.
>>
>> Fixes: 86c22f8c9a3b ("Mailbox: Add support for Platform Communication Channel")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Jiale Yao <yaojiale02@163.com>
>> ---
>>
>> Notes:
>> Changes in v2:
>> - Replace the type switch with a minimum-length lookup table.
>> - Remove the redundant remaining-header-size check.
>> - Keep an explicit type bound check before indexing the table.
>>
>> drivers/mailbox/pcc.c | 49 ++++++++++++++++++++++++++++++++++++++++++-
>> 1 file changed, 48 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
>> index 9888dab64639..91cef0ee3391 100644
>> --- a/drivers/mailbox/pcc.c
>> +++ b/drivers/mailbox/pcc.c
>> @@ -553,6 +553,38 @@ static const struct mbox_chan_ops pcc_chan_ops = {
>> .last_tx_done = pcc_last_tx_done,
>> };
>>
>> +static const u16 pcc_subspace_min_len[ACPI_PCCT_TYPE_RESERVED] = {
>> + [ACPI_PCCT_TYPE_GENERIC_SUBSPACE] =
>> + sizeof(struct acpi_pcct_subspace),
>> + [ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE] =
>> + sizeof(struct acpi_pcct_hw_reduced),
>> + [ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2] =
>> + sizeof(struct acpi_pcct_hw_reduced_type2),
>> + [ACPI_PCCT_TYPE_EXT_PCC_MASTER_SUBSPACE] =
>> + sizeof(struct acpi_pcct_ext_pcc_master),
>> + [ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE] =
>> + sizeof(struct acpi_pcct_ext_pcc_slave),
>
>Please add Type 5 details here as well so that it doesn't escape the
>size validation. As is, its zero-initialized and lets every non 0-byte
>record pass validation.
>
>> +};
>> +
>> +static bool pcc_subspace_is_valid(struct acpi_subtable_header *entry,
>> + unsigned long end)
>> +{
>> + unsigned long start = (unsigned long)entry;
>> + size_t length;
>> +
>> + if (start >= end)
>> + return false;
>> +
>> + length = entry->length;
>> + if (length < sizeof(*entry) || length > end - start)
>> + return false;
>> +
>> + if (entry->type >= ACPI_PCCT_TYPE_RESERVED)
>> + return false;
>> +
>
>You can drop the above check if parse_pcc_subspace() does this first.
>
>> + return length >= pcc_subspace_min_len[entry->type];
>> +}
>> +
>> /**
>> * parse_pcc_subspace - Count PCC subspaces defined
>> * @header: Pointer to the ACPI subtable header under the PCCT.
>> @@ -568,6 +600,9 @@ static int parse_pcc_subspace(union acpi_subtable_headers *header,
>> {
>> struct acpi_pcct_subspace *ss = (struct acpi_pcct_subspace *) header;
>>
>> + if (!pcc_subspace_is_valid(&ss->header, end))
>> + return -EINVAL;
>> +
>
>So this will take care of validation as part of acpi_probe() itself which is
>good but see my question below.
>
>> if (ss->header.type < ACPI_PCCT_TYPE_RESERVED)
>> return 0;
>>
>
>Make this the first check(need to reverse it to return error now) and
>drop the above check as mentioned.
>
>> @@ -812,6 +847,7 @@ static int pcc_mbox_probe(struct platform_device *pdev)
>> struct acpi_table_header *pcct_tbl;
>> struct acpi_subtable_header *pcct_entry;
>> struct acpi_table_pcct *acpi_pcct_tbl;
>> + unsigned long table_end;
>> acpi_status status = AE_OK;
>> int i, rc, count = pcc_chan_count;
>>
>> @@ -821,6 +857,13 @@ static int pcc_mbox_probe(struct platform_device *pdev)
>> if (ACPI_FAILURE(status) || !pcct_tbl)
>> return -ENODEV;
>>
>> + acpi_pcct_tbl = (struct acpi_table_pcct *)pcct_tbl;
>> + if (pcct_tbl->length < sizeof(*acpi_pcct_tbl)) {
>> + rc = -EINVAL;
>> + goto err;
>> + }
>> + table_end = (unsigned long)pcct_tbl + pcct_tbl->length;
>> +
>> pcc_mbox_channels = devm_kcalloc(dev, count, sizeof(*pcc_mbox_channels),
>> GFP_KERNEL);
>> if (!pcc_mbox_channels) {
>> @@ -844,7 +887,6 @@ static int pcc_mbox_probe(struct platform_device *pdev)
>> pcct_entry = (struct acpi_subtable_header *) (
>> (unsigned long) pcct_tbl + sizeof(struct acpi_table_pcct));
>>
>> - acpi_pcct_tbl = (struct acpi_table_pcct *) pcct_tbl;
>> if (acpi_pcct_tbl->flags & ACPI_PCCT_DOORBELL) {
>> pcc_mbox_ctrl->txdone_irq = true;
>> pcc_mbox_ctrl->txdone_poll = false;
>> @@ -856,6 +898,11 @@ static int pcc_mbox_probe(struct platform_device *pdev)
>> for (i = 0; i < count; i++) {
>> struct pcc_chan_info *pchan = chan_info + i;
>>
>> + if (!pcc_subspace_is_valid(pcct_entry, table_end)) {
>> + rc = -EINVAL;
>> + goto err;
>> + }
>> +
>
>Why do we need to re-validate the subspace if it is already taken care
>before pcc_mbox_probe() as part of acpi_probe(). IMO the changes in
>pcc_mbox_probe() can be dropped.
Thanks for your review, the update one is here,
https://lore.kernel.org/all/20261027064835.2264459-1-yaojiale02@163.com
>
>--
>Regards,
>Sudeep
prev parent reply other threads:[~2026-10-27 6:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-23 9:38 Jiale Yao
2026-10-23 14:24 ` Sudeep Holla
2026-10-27 6:50 ` jiale yao [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6b05ec89.55fd.1a17c203cd6.Coremail.19888972804@163.com \
--to=19888972804@163.com \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=jassisinghbrar@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=sudeep.holla@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®