From: Jeff Kletsky <lede@allycomm.com>
To: unlisted-recipients:; (no To-header on input)
Cc: "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] mtd: spinand: Add initial support for Paragon PN26G0xA
Date: Tue, 25 Jun 2019 07:45:44 -0700 [thread overview]
Message-ID: <6b12e641-329c-2f8d-e547-4437cbd7af9f@allycomm.com> (raw)
In-Reply-To: <d614767b-7787-b8c7-f8f0-5083e4922b93@kontron.de>
(Resend to lists only, due to multipart content in previous)
Of course!
Thanks for taking the time to look at this.
* Updated OOB-layout definitions to agree with
Table 10; ECC Protection and Spare Area
(PN26G01A pg. 36, PN26G02A pg. 35)
* Corrected NAND_MEMORG for PN26G02A to 41, to agree with
Table 9; Error Management Details (PN26G02A pg. 34)
Jeff
On 6/25/19 2:41 AM, Schrempf Frieder wrote:
> Hi Jeff,
>
> On 18.06.19 19:08, Jeff Kletsky wrote:
>> From: Jeff Kletsky <git-commits@allycomm.com>
>>
>> Add initial support for Paragon Technology
>> PN26G01Axxxxx and PN26G02Axxxxx SPI NAND
>>
>> Datasheets available at
>> http://www.xtxtech.com/upfile/2016082517274590.pdf
>> http://www.xtxtech.com/upfile/2016082517282329.pdf
>>
>> Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
>> ---
> Can you please add a changelog here with a list of things that changed
> from v1 to v2?
>
> Thanks,
> Frieder
>
>> drivers/mtd/nand/spi/Makefile | 2 +-
>> drivers/mtd/nand/spi/core.c | 1 +
>> drivers/mtd/nand/spi/paragon.c | 147 +++++++++++++++++++++++++++++++++
>> include/linux/mtd/spinand.h | 1 +
>> 4 files changed, 150 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/mtd/nand/spi/paragon.c
>>
>> diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
>> index 753125082640..9662b9c1d5a9 100644
>> --- a/drivers/mtd/nand/spi/Makefile
>> +++ b/drivers/mtd/nand/spi/Makefile
>> @@ -1,3 +1,3 @@
>> # SPDX-License-Identifier: GPL-2.0
>> -spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o
>> +spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
>> obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
>> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
>> index 556bfdb34455..f0f3528aab8f 100644
>> --- a/drivers/mtd/nand/spi/core.c
>> +++ b/drivers/mtd/nand/spi/core.c
>> @@ -757,6 +757,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
>> &gigadevice_spinand_manufacturer,
>> ¯onix_spinand_manufacturer,
>> µn_spinand_manufacturer,
>> + ¶gon_spinand_manufacturer,
>> &toshiba_spinand_manufacturer,
>> &winbond_spinand_manufacturer,
>> };
>> diff --git a/drivers/mtd/nand/spi/paragon.c b/drivers/mtd/nand/spi/paragon.c
>> new file mode 100644
>> index 000000000000..52307681cbd0
>> --- /dev/null
>> +++ b/drivers/mtd/nand/spi/paragon.c
>> @@ -0,0 +1,147 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2019 Jeff Kletsky
>> + *
>> + * Author: Jeff Kletsky <git-commits@allycomm.com>
>> + */
>> +
>> +#include <linux/device.h>
>> +#include <linux/kernel.h>
>> +#include <linux/mtd/spinand.h>
>> +
>> +
>> +#define SPINAND_MFR_PARAGON 0xa1
>> +
>> +
>> +#define PN26G0XA_STATUS_ECC_BITMASK (3 << 4)
>> +
>> +#define PN26G0XA_STATUS_ECC_NONE_DETECTED (0 << 4)
>> +#define PN26G0XA_STATUS_ECC_1_7_CORRECTED (1 << 4)
>> +#define PN26G0XA_STATUS_ECC_ERRORED (2 << 4)
>> +#define PN26G0XA_STATUS_ECC_8_CORRECTED (3 << 4)
>> +
>> +
>> +static SPINAND_OP_VARIANTS(read_cache_variants,
>> + SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
>> + SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
>> + SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
>> + SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
>> + SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
>> + SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
>> +
>> +static SPINAND_OP_VARIANTS(write_cache_variants,
>> + SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
>> + SPINAND_PROG_LOAD(true, 0, NULL, 0));
>> +
>> +static SPINAND_OP_VARIANTS(update_cache_variants,
>> + SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
>> + SPINAND_PROG_LOAD(false, 0, NULL, 0));
>> +
>> +
>> +static int pn26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section,
>> + struct mtd_oob_region *region)
>> +{
>> + if (section > 3)
>> + return -ERANGE;
>> +
>> + region->offset = 6 + (15 * section); /* 4 BBM + 2 user bytes */
>> + region->length = 13;
>> +
>> + return 0;
>> +}
>> +
>> +static int pn26g0xa_ooblayout_free(struct mtd_info *mtd, int section,
>> + struct mtd_oob_region *region)
>> +{
>> + if (section > 4)
>> + return -ERANGE;
>> +
>> + if (section == 4) {
>> + region->offset = 64;
>> + region->length = 64;
>> + } else {
>> + region->offset = 4 + (15 * section);
>> + region->length = 2;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int pn26g0xa_ecc_get_status(struct spinand_device *spinand,
>> + u8 status)
>> +{
>> + switch (status & PN26G0XA_STATUS_ECC_BITMASK) {
>> + case PN26G0XA_STATUS_ECC_NONE_DETECTED:
>> + return 0;
>> +
>> + case PN26G0XA_STATUS_ECC_1_7_CORRECTED:
>> + return 7; /* Return upper limit by convention */
>> +
>> + case PN26G0XA_STATUS_ECC_8_CORRECTED:
>> + return 8;
>> +
>> + case PN26G0XA_STATUS_ECC_ERRORED:
>> + return -EBADMSG;
>> +
>> + default:
>> + break;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static const struct mtd_ooblayout_ops pn26g0xa_ooblayout = {
>> + .ecc = pn26g0xa_ooblayout_ecc,
>> + .free = pn26g0xa_ooblayout_free,
>> +};
>> +
>> +
>> +static const struct spinand_info paragon_spinand_table[] = {
>> + SPINAND_INFO("PN26G01A", 0xe1,
>> + NAND_MEMORG(1, 2048, 128, 64, 1024, 21, 1, 1, 1),
>> + NAND_ECCREQ(8, 512),
>> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
>> + &write_cache_variants,
>> + &update_cache_variants),
>> + 0,
>> + SPINAND_ECCINFO(&pn26g0xa_ooblayout,
>> + pn26g0xa_ecc_get_status)),
>> + SPINAND_INFO("PN26G02A", 0xe2,
>> + NAND_MEMORG(1, 2048, 128, 64, 2048, 41, 1, 1, 1),
>> + NAND_ECCREQ(8, 512),
>> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
>> + &write_cache_variants,
>> + &update_cache_variants),
>> + 0,
>> + SPINAND_ECCINFO(&pn26g0xa_ooblayout,
>> + pn26g0xa_ecc_get_status)),
>> +};
>> +
>> +static int paragon_spinand_detect(struct spinand_device *spinand)
>> +{
>> + u8 *id = spinand->id.data;
>> + int ret;
>> +
>> + /* Read ID returns [0][MID][DID] */
>> +
>> + if (id[1] != SPINAND_MFR_PARAGON)
>> + return 0;
>> +
>> + ret = spinand_match_and_init(spinand, paragon_spinand_table,
>> + ARRAY_SIZE(paragon_spinand_table),
>> + id[2]);
>> + if (ret)
>> + return ret;
>> +
>> + return 1;
>> +}
>> +
>> +static const struct spinand_manufacturer_ops paragon_spinand_manuf_ops = {
>> + .detect = paragon_spinand_detect,
>> +};
>> +
>> +const struct spinand_manufacturer paragon_spinand_manufacturer = {
>> + .id = SPINAND_MFR_PARAGON,
>> + .name = "Paragon",
>> + .ops = ¶gon_spinand_manuf_ops,
>> +};
>> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
>> index fbc0423bb4ae..4ea558bd3c46 100644
>> --- a/include/linux/mtd/spinand.h
>> +++ b/include/linux/mtd/spinand.h
>> @@ -227,6 +227,7 @@ struct spinand_manufacturer {
>> extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
>> extern const struct spinand_manufacturer macronix_spinand_manufacturer;
>> extern const struct spinand_manufacturer micron_spinand_manufacturer;
>> +extern const struct spinand_manufacturer paragon_spinand_manufacturer;
>> extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
>> extern const struct spinand_manufacturer winbond_spinand_manufacturer;
>>
>>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
next prev parent reply other threads:[~2019-06-25 14:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-18 17:08 Jeff Kletsky
2019-06-25 9:41 ` Schrempf Frieder
2019-06-25 14:45 ` Jeff Kletsky [this message]
2019-06-27 17:55 ` Schrempf Frieder
2019-06-28 18:37 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6b12e641-329c-2f8d-e547-4437cbd7af9f@allycomm.com \
--to=lede@allycomm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®