mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: James Hilliard <james.hilliard1@gmail.com>,
	Richard Genoud <richard.genoud@bootlin.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>,
	Alastair D'Silva <alastair@d-silva.org>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [PATCH net-next v3 3/3] net: stmmac: sun8i: add support for Allwinner H616 EMAC1
Date: Fri, 18 Sep 2026 20:22:57 +0200	[thread overview]
Message-ID: <6b35feab-353c-4802-b47d-08ff6d226eca@arm.com> (raw)
In-Reply-To: <20260917-submit-h616-emac1-v1-v3-3-62cb8316e19b@gmail.com>

Hi,

On 9/17/26 19:55, James Hilliard wrote:
> The H616 secondary EMAC uses a separate system-control clock register
> and supports only RMII at 10/100 Mbps. It connects internally to the
> co-packaged AC200 or AC300 EPHY and has no external PHY pins.
> 
> Add an EMAC1 variant using the dedicated register and enable only RMII.
> Leave PHY initialization to the PHY driver instead of using the H3
> internal-PHY controls. No RX or TX clock delays are configured for this
> RMII-only variant.
> 
> Co-developed-by: Richard Genoud <richard.genoud@bootlin.com>
> Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
> Signed-off-by: James Hilliard <james.hilliard1@gmail.com>

Looks good to me, nice and minimal:

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre


> ---
>   drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> index 4523a14f5e0c..1020168f1c3a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> @@ -81,6 +81,13 @@ static const struct reg_field sun8i_syscon_reg_field = {
>   	.msb = 31,
>   };
>   
> +/* EMAC1 clock register @ 0x34 in the "system control" address range */
> +static const struct reg_field sun8i_syscon_reg_field_emac1 = {
> +	.reg = 0x34,
> +	.lsb = 0,
> +	.msb = 31,
> +};
> +
>   /* EMAC clock register @ 0x164 in the CCU address range */
>   static const struct reg_field sun8i_ccu_reg_field = {
>   	.reg = 0x164,
> @@ -143,6 +150,13 @@ static const struct emac_variant emac_variant_h6 = {
>   	.tx_delay_max = 7,
>   };
>   
> +static const struct emac_variant emac_variant_h616_emac1 = {
> +	.syscon_field = &sun8i_syscon_reg_field_emac1,
> +	/* The co-packaged AC200/AC300 PHY does not use the H3 PHY controls. */
> +	.soc_has_internal_phy = false,
> +	.support_rmii = true,
> +};
> +
>   #define EMAC_BASIC_CTL0 0x00
>   #define EMAC_BASIC_CTL1 0x04
>   #define EMAC_INT_STA    0x08
> @@ -1276,6 +1290,8 @@ static const struct of_device_id sun8i_dwmac_match[] = {
>   		.data = &emac_variant_a64 },
>   	{ .compatible = "allwinner,sun50i-h6-emac",
>   		.data = &emac_variant_h6 },
> +	{ .compatible = "allwinner,sun50i-h616-emac1",
> +		.data = &emac_variant_h616_emac1 },
>   	{ }
>   };
>   MODULE_DEVICE_TABLE(of, sun8i_dwmac_match);
> 


  parent reply	other threads:[~2026-09-18 18:23 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-17 17:55 [PATCH net-next v3 0/3] net: stmmac: add Allwinner H616 EMAC1 support James Hilliard
2026-09-17 17:55 ` [PATCH net-next v3 1/3] net: stmmac: sun8i: reset the MAC after PHY initialization James Hilliard
2026-09-18  6:33   ` Maxime Chevallier
2026-09-17 17:55 ` [PATCH net-next v3 2/3] dt-bindings: net: allwinner: add H616 EMAC1 James Hilliard
2026-09-17 17:55 ` [PATCH net-next v3 3/3] net: stmmac: sun8i: add support for Allwinner " James Hilliard
2026-09-18  6:28   ` Maxime Chevallier
2026-09-18 18:22   ` Andre Przywara [this message]
2026-09-18  4:17 ` [PATCH net-next v3 0/3] net: stmmac: add Allwinner H616 EMAC1 support Alastair D'Silva
2026-09-18  6:36   ` Maxime Chevallier
2026-09-19  1:07 ` Alastair D'Silva

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6b35feab-353c-4802-b47d-08ff6d226eca@arm.com \
    --to=andre.przywara@arm.com \
    --cc=alastair@d-silva.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=james.hilliard1@gmail.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=joabreu@synopsys.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mripard@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=richard.genoud@bootlin.com \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®