Re: [PATCH 0/4] Enable stm32mp1 camera support

[Alexandre Torgue <alexandre.torgue@st.com>]

Dear Hugues,

On 2/28/19 3:25 PM, Hugues Fruchet wrote:
> This patchset serie enables camera of stm32mp157c evaluation board.
> To do so, both stm32mp157c DCMI camera interface driver and OV5640 camera
> module driver are enabled in devicetree.
> 
> DCMI camera interface driver is enabled by default in multi_v7 configuration
> but OV5640 driver remains to be selected at kernel configuration time.
> 
> This patchset depends on STMicroelectronics Multi-Function eXpander
> (STMFX) support [1].
> 
> [1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1944108.html
> 
> Hugues Fruchet (4):
>    ARM: dts: stm32: add 2v8 fixed regulator for stm32mp157c-ed1 board
>    ARM: dts: stm32: add DCMI camera interface support on stm32mp157c
>    ARM: dts: stm32: add DCMI pins to stm32mp157c
>    ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board
> 
>   arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 41 ++++++++++++++++++++++
>   arch/arm/boot/dts/stm32mp157c-ed1.dts     |  8 +++++
>   arch/arm/boot/dts/stm32mp157c-ev1.dts     | 56 +++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/stm32mp157c.dtsi        | 12 +++++++
>   4 files changed, 117 insertions(+)
> 

Patch 2 to 4 applied on stm32-next. Patch 1 is no longer needed as 
regulators are now provided by PMIC.

thanks
Alex