Re: [PATCH v3 3/6] arm64: dts: qcom: msm8917-xiaomi-wingtech: Add goodix touch

[David Heidelberg <david@ixit.cz>]

On 15/03/2026 17:26, Barnabás Czémán wrote:
> There are variants from MSM8917 wingtech xiaomis what
> are using goodix touch controller instead of focaltech.
> Add goodix node for make it able to use touch on all
> variants.
> 
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>   arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi | 16 ++++++++++++++++

The file is not in the linux-next or linus tree.

If this patch depends on another series, it should be stated here and preferably 
also reference (can be done with b4 tool).

David

>   1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi
> index 714e75de014b..69eda5f42c06 100644
> --- a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi
> @@ -102,6 +102,22 @@ edt_ft5306: touchscreen@38 {
>   
>   		status = "disabled";
>   	};
> +
> +	goodix_gt911: touchscreen@5d {
> +		compatible = "goodix,gt911";
> +		reg = <0x5d>;
> +		interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
> +		irq-gpios = <&tlmm 65 GPIO_ACTIVE_HIGH>;
> +		reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&tsp_int_rst_default>;
> +		pinctrl-names = "default";
> +		AVDD28-supply = <&pm8937_l10>;
> +		VDDIO-supply = <&pm8937_l5>;
> +		touchscreen-size-x = <720>;
> +		touchscreen-size-y = <1280>;
> +
> +		status = "disabled";
> +	};
>   };
>   
>   &pm8937_gpios {
> 

-- 
David Heidelberg