Re: [PATCH v11 1/2] crypto: hisilicon - qm updates BAR configuration

[liulongfang <liulongfang@huawei.com>]

On 2025/10/29 21:26, Alex Williamson wrote:
> On Wed, 29 Oct 2025 20:24:40 +0800
> Longfang Liu <liulongfang@huawei.com> wrote:
> 
>> On new platforms greater than QM_HW_V3, the configuration region for the
>> live migration function of the accelerator device is no longer
>> placed in the VF, but is instead placed in the PF.
>>
>> Therefore, the configuration region of the live migration function
>> needs to be opened when the QM driver is loaded. When the QM driver
>> is uninstalled, the driver needs to clear this configuration.
>>
>> Signed-off-by: Longfang Liu <liulongfang@huawei.com>
>> Reviewed-by: Shameer Kolothum <shameerkolothum@gmail.com>
>> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
>> ---
>>  drivers/crypto/hisilicon/qm.c | 27 +++++++++++++++++++++++++++
>>  include/linux/hisi_acc_qm.h   |  3 +++
>>  2 files changed, 30 insertions(+)
>>
>> diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
>> index a5b96adf2d1e..f0fd0c3698eb 100644
>> --- a/drivers/crypto/hisilicon/qm.c
>> +++ b/drivers/crypto/hisilicon/qm.c
>> @@ -3019,11 +3019,36 @@ static void qm_put_pci_res(struct hisi_qm *qm)
>>  	pci_release_mem_regions(pdev);
>>  }
>>  
>> +static void hisi_mig_region_clear(struct hisi_qm *qm)
>> +{
>> +	u32 val;
>> +
>> +	/* Clear migration region set of PF */
>> +	if (qm->fun_type == QM_HW_PF && qm->ver > QM_HW_V3) {
>> +		val = readl(qm->io_base + QM_MIG_REGION_SEL);
>> +		val &= ~BIT(0);
>> +		writel(val, qm->io_base + QM_MIG_REGION_SEL);
>> +	}
>> +}
>> +
>> +static void hisi_mig_region_enable(struct hisi_qm *qm)
>> +{
>> +	u32 val;
>> +
>> +	/* Select migration region of PF */
>> +	if (qm->fun_type == QM_HW_PF && qm->ver > QM_HW_V3) {
>> +		val = readl(qm->io_base + QM_MIG_REGION_SEL);
>> +		val |= QM_MIG_REGION_EN;
>> +		writel(val, qm->io_base + QM_MIG_REGION_SEL);
>> +	}
>> +}
> 
> Same as commented last time:
> 
> https://lore.kernel.org/all/20251027222011.05bac6bd@shazbot.org/
>

OK, I'll fix this and update the version.

Thanks.
Longfang.

>> +
>>  static void hisi_qm_pci_uninit(struct hisi_qm *qm)
>>  {
>>  	struct pci_dev *pdev = qm->pdev;
>>  
>>  	pci_free_irq_vectors(pdev);
>> +	hisi_mig_region_clear(qm);
>>  	qm_put_pci_res(qm);
>>  	pci_disable_device(pdev);
>>  }
>> @@ -5725,6 +5750,7 @@ int hisi_qm_init(struct hisi_qm *qm)
>>  		goto err_free_qm_memory;
>>  
>>  	qm_cmd_init(qm);
>> +	hisi_mig_region_enable(qm);
>>  
>>  	return 0;
>>  
>> @@ -5863,6 +5889,7 @@ static int qm_rebuild_for_resume(struct hisi_qm *qm)
>>  	}
>>  
>>  	qm_cmd_init(qm);
>> +	hisi_mig_region_enable(qm);
>>  	hisi_qm_dev_err_init(qm);
>>  	/* Set the doorbell timeout to QM_DB_TIMEOUT_CFG ns. */
>>  	writel(QM_DB_TIMEOUT_SET, qm->io_base + QM_DB_TIMEOUT_CFG);
>> diff --git a/include/linux/hisi_acc_qm.h b/include/linux/hisi_acc_qm.h
>> index c4690e365ade..aa0129d20c51 100644
>> --- a/include/linux/hisi_acc_qm.h
>> +++ b/include/linux/hisi_acc_qm.h
>> @@ -99,6 +99,9 @@
>>  
>>  #define QM_DEV_ALG_MAX_LEN		256
>>  
>> +#define QM_MIG_REGION_SEL		0x100198
>> +#define QM_MIG_REGION_EN		0x1
>> +
>>  /* uacce mode of the driver */
>>  #define UACCE_MODE_NOUACCE		0 /* don't use uacce */
>>  #define UACCE_MODE_SVA			1 /* use uacce sva mode */
> 
> .
>