Re: [PATCH v3 2/4] dt-bindings: iio: adc: add IIO backend support

[David Lechner <dlechner@baylibre.com>]

On 8/18/25 8:12 AM, Ioana Risteiu wrote:
> Add the generic io-backends property to the AD7779 binding to enable
> support for the IIO backend framework.
> 
> Also add the adi,num-lanes property to set the number of lanes used by
> AD7779.
> 
> Signed-off-by: Ioana Risteiu <Ioana.Risteiu@analog.com>
> ---
>  .../bindings/iio/adc/adi,ad7779.yaml          | 35 ++++++++++++++++++-
>  1 file changed, 34 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
> index 044f92f39cfa..4a212c8bc9d3 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
> @@ -80,11 +80,27 @@ properties:
>    reset-gpios:
>      maxItems: 1
>  
> +  io-backends:
> +    maxItems: 1
> +
> +  adi,num-lanes:
> +    description:
> +      Number of lanes on which the data is sent on the output when the data
> +      output interface is used.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [1, 2, 4]
> +    default: 4

Isn't 0 lanes wired up an option? I.e. it is possible to use the
chip in SPI-only mode. So it seems like 0 should be the default.