From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965203AbVI1A5N (ORCPT ); Tue, 27 Sep 2005 20:57:13 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965241AbVI1A5N (ORCPT ); Tue, 27 Sep 2005 20:57:13 -0400 Received: from paegas2.mail-atlas.net ([212.47.13.187]:21511 "EHLO paegas2.mail-atlas.net") by vger.kernel.org with ESMTP id S965203AbVI1A5M convert rfc822-to-8bit (ORCPT ); Tue, 27 Sep 2005 20:57:12 -0400 From: "janik holy" To: linux-kernel@vger.kernel.org Message-ID: <6c784b3971ca4a3293c1d745feaa6010@pobox.sk> Date: Wed, 28 Sep 2005 02:57:10 +0200 X-Priority: 3 (Normal) Subject: intelfb broken ? X-Confirmation-Reading-To: "janik holy" MIME-Version: 1.0 Content-type: text/plain; charset=windows-1250 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, i have hp compaq nx9020 with Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02), im trying run console with framebuffer -> intelfb, in kernel 2.6.11, and vga=792, all work ok, just cursor is not visible. In all kernel > 2.6.11, vga=792, my laptop just booting, all should work, but display is all the time blank, nothing is seen. this is log from 2.6.11, where all work but cursor is not visible, in lilo vga=792, because append=intelfb... is impossible to use if laptop... intelfb: 00:02.0: Intel(R) 852GM, aperture size 128MB, stolen memory 32636kB intelfb: MTRR is disabled in the kernel intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Initial video mode is 1024x768-32@60. intelfb: Changing the video mode is not supported. Console: switching to colour frame buffer device 128x48 with > 2.6.11, actually 2.6.13.2 laptop boot, but on display is nothing, just black .. better blank display i try to look at dmesg (by blind) intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chipset s intelfb: Version 0.9.2 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 intelfb: 00:02.0: Intel(R) 852GM, aperture size 128MB, stolen memory 32636kB intelfb: MTRR is disabled in the kernel intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Initial video mode is 1024x768-32@60. intelfb: Changing the video mode is not supported. Console: switching to colour frame buffer device 128x48 then same stuff like in 2.6.11 but dont work ;-/ In kernel i have compiled Graphic support -> * Support for the frame buffer devices -> * Intel 830/.... Console display and driver support -> * Video mode selection support , * Framebuffer console support all this stuff compiled in kernel, not as module. Any idea where can be problem ? why it doesnt work with new kernel, so its this drivers broken ? Thanks Aktivujte si neobmedzenu mailovu schranku na www.pobox.sk!