From: Wadim Egorov <w.egorov@phytec.de>
To: Judith Mendez <jm@ti.com>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: Re: [PATCH v3 0/9] Fix MMC properties on Sitara K3 devices
Date: Wed, 14 Feb 2024 11:26:49 +0100 [thread overview]
Message-ID: <6c8feafd-a34c-4c7b-b6cd-4cd73b086259@phytec.de> (raw)
In-Reply-To: <20240213235701.2438513-1-jm@ti.com>
Am 14.02.24 um 00:56 schrieb Judith Mendez:
> This patch series aims to fix and update MMC nodes for TI
> Sitara K3 devices with the following changes.
>
> The series introduces sdhci0 and sdhci2 nodes and enables
> eMMC for AM62ax platform.
>
> Also introduce fixes for MMC ITAP/OTAP values for AM64x
> platform according to device datasheet [0], and add ITAP/
> OTAP values for AM62p to enable the highest timing possible
> for MMC0 and MMC1, according to device datasheet [1].
>
> The DLL properties ti,trm-icp and ti,driver-strength-ohm
> should be removed for soft PHYs since drive strength cannot
> be changed, so remove these properties when not applicable.
> Since this fix touches non-TI boards and therefore cannot be
> tested, all tested-by's are welcome.
>
> Also include a few fixes for ti,clkbuf-sel, bus-width,
> and bootph-all device tree properties in MMC nodes.
>
> This series was tested on:
> - AM62a SK
> - AM62x SK
> - AM62p SK
> - AM64x GP EVM
> - AM64x SK EVM
> - Beagleplay
Adding my Tested-by for the phyBOARD-Electra-AM642 board.
Tested-by: Wadim Egorov <w.egorov@phytec.de>
>
> [0] https://www.ti.com/lit/ds/symlink/am6442.pdf
> [1] https://www.ti.com/lit/ds/symlink/am62p.pdf
>
> Fixes since V2:
> - Remove ti,driver-strength-ohm property in sdhci1 node for
> k3-am642-tqma64xxl-mbax4xxl and k3-am642-phyboard-electra-rdk board files.
> - Add Francesco's Acked-by
>
> V2: https://lore.kernel.org/linux-devicetree/20240213002416.1560357-1-jm@ti.com/
> V1: https://lore.kernel.org/linux-devicetree/22af7436-8833-4049-bdbb-f79bb3314ee8@ti.com/
> RFC: https://lore.kernel.org/linux-devicetree/c94b7399-31c0-4e7d-a616-8f29c86a27ba@ti.com/
>
> Judith Mendez (7):
> arm64: dts: ti: k3-am62a-main: Add sdhci2 instance
> arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC
> arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC
> arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs
> arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes
> arm64: dts: ti: k3-am6*: Fix bus-width property in MMC nodes
> arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node
>
> Nitin Yadav (2):
> arm64: dts: ti: k3-am62a-main: Add sdhci0 instance
> arm64: dts: ti: k3-am62a7-sk: Enable eMMC support
>
> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 12 +++--
> .../boot/dts/ti/k3-am62-phycore-som.dtsi | 1 -
> .../boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 1 -
> .../arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi | 1 -
> .../boot/dts/ti/k3-am62-verdin-wifi.dtsi | 1 -
> arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 2 -
> .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 4 --
> .../dts/ti/k3-am625-phyboard-lyra-rdk.dts | 1 -
> arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 45 ++++++++++++++++++-
> arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 27 ++++++++++-
> arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 44 ++++++++++++++++--
> arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 3 +-
> .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 -
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 15 +++++--
> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 4 +-
> .../dts/ti/k3-am642-phyboard-electra-rdk.dts | 1 -
> arch/arm64/boot/dts/ti/k3-am642-sk.dts | 2 -
> .../dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 1 -
> 18 files changed, 129 insertions(+), 38 deletions(-)
>
>
> base-commit: 1e6bbc5185bcd113c8d2f7aa0a02f588a6bdbe5d
next prev parent reply other threads:[~2024-02-14 10:42 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-13 23:56 Judith Mendez
2024-02-13 23:56 ` [PATCH v3 1/9] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Judith Mendez
2024-02-13 23:56 ` [PATCH v3 2/9] arm64: dts: ti: k3-am62a-main: Add sdhci2 instance Judith Mendez
2024-02-13 23:56 ` [PATCH v3 3/9] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Judith Mendez
2024-02-13 23:56 ` [PATCH v3 4/9] arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC Judith Mendez
2024-02-13 23:56 ` [PATCH v3 5/9] arm64: dts: ti: k3-am62p: Add " Judith Mendez
2024-02-13 23:56 ` [PATCH v3 6/9] arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs Judith Mendez
2024-02-13 23:56 ` [PATCH v3 7/9] arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes Judith Mendez
2024-02-13 23:57 ` [PATCH v3 8/9] arm64: dts: ti: k3-am6*: Fix bus-width " Judith Mendez
2024-02-13 23:57 ` [PATCH v3 9/9] arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node Judith Mendez
2024-02-14 10:26 ` Wadim Egorov [this message]
2024-02-20 4:03 ` [PATCH v3 0/9] Fix MMC properties on Sitara K3 devices Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6c8feafd-a34c-4c7b-b6cd-4cd73b086259@phytec.de \
--to=w.egorov@phytec.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.dolcini@toradex.com \
--cc=jm@ti.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®