mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@tuxon.dev>
To: Biju <biju.das.au@gmail.com>,
	Biju Das <biju.das.jz@bp.renesas.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org,
	Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Subject: Re: [PATCH 3/3] drm: renesas: rz-du: Add support for RZ/G3L LVDS encoder
Date: Tue, 21 Apr 2026 12:12:03 +0300	[thread overview]
Message-ID: <6d223449-8a5e-4565-b026-8c7cf6961343@tuxon.dev> (raw)
In-Reply-To: <20260417175235.224809-4-biju.das.jz@bp.renesas.com>

Hi,

On 4/17/26 20:52, Biju wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
> 
> Add support for the RZ/G3L LVDS encoder driver. It operates in single-link
> mode with 4 lanes (Data) + 1 lane (Clock) and supports pixel clock rates
> from 25 to 87 MHz. The LVDS module cannot be used at the same time as
> MIPI-DSI. However, LVDS and the DSI interface share a peripheral clock and
> the MIPI_DSI_PRESET_N reset signal. Also, the MIPI_DSI_CMN_RSTB and
> MIPI_DSI_ARESET_N reset signals must be asserted before using the LVDS
> module.
> 
> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
>   drivers/gpu/drm/renesas/rz-du/Kconfig         |  13 +
>   drivers/gpu/drm/renesas/rz-du/Makefile        |   1 +
>   drivers/gpu/drm/renesas/rz-du/rzg3l_lvds.c    | 333 ++++++++++++++++++
>   drivers/gpu/drm/renesas/rz-du/rzg3l_lvds.h    |  22 ++
>   .../gpu/drm/renesas/rz-du/rzg3l_lvds_regs.h   |  26 ++
>   5 files changed, 395 insertions(+)
>   create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg3l_lvds.c
>   create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg3l_lvds.h
>   create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg3l_lvds_regs.h
> 
> diff --git a/drivers/gpu/drm/renesas/rz-du/Kconfig b/drivers/gpu/drm/renesas/rz-du/Kconfig
> index 7f2ef7137ae5..cbfc7b6bccb8 100644
> --- a/drivers/gpu/drm/renesas/rz-du/Kconfig
> +++ b/drivers/gpu/drm/renesas/rz-du/Kconfig
> @@ -26,3 +26,16 @@ config DRM_RZG2L_MIPI_DSI
>   	def_tristate DRM_RZG2L_DU
>   	depends on DRM_RZG2L_USE_MIPI_DSI
>   	select DRM_MIPI_DSI
> +
> +config DRM_RZG3L_USE_LVDS
> +	bool "RZ/G3L DU LVDS Encoder Support"
> +	depends on DRM_BRIDGE && OF
> +	default DRM_RZG2L_DU
> +	help
> +	  Enable support for the RZ/G3L Display Unit embedded LVDS encoders.
> +
> +config DRM_RZG3L_LVDS
> +	def_tristate DRM_RZG2L_DU
> +	depends on DRM_RZG3L_USE_LVDS
> +	select DRM_KMS_HELPER
> +	select DRM_PANEL
> diff --git a/drivers/gpu/drm/renesas/rz-du/Makefile b/drivers/gpu/drm/renesas/rz-du/Makefile
> index 2987900ea6b6..46decb7ac4f1 100644
> --- a/drivers/gpu/drm/renesas/rz-du/Makefile
> +++ b/drivers/gpu/drm/renesas/rz-du/Makefile
> @@ -8,3 +8,4 @@ rzg2l-du-drm-$(CONFIG_VIDEO_RENESAS_VSP1)	+= rzg2l_du_vsp.o
>   obj-$(CONFIG_DRM_RZG2L_DU)		+= rzg2l-du-drm.o
>   
>   obj-$(CONFIG_DRM_RZG2L_MIPI_DSI)	+= rzg2l_mipi_dsi.o
> +obj-$(CONFIG_DRM_RZG3L_LVDS)		+= rzg3l_lvds.o
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg3l_lvds.c b/drivers/gpu/drm/renesas/rz-du/rzg3l_lvds.c
> new file mode 100644
> index 000000000000..bedeedbdfada
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg3l_lvds.c
> @@ -0,0 +1,333 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * RZ/G3L LVDS Encoder Driver
> + *
> + * Copyright (C) 2026 Renesas Electronics Corporation
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/media-bus-format.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_probe_helper.h>
> +
> +#include "rzg3l_lvds.h"
> +#include "rzg3l_lvds_regs.h"
> +
> +enum rzg3l_lvds_mode {
> +	RZG3L_LVDS_MODE_JEIDA = 0,
> +	RZG3L_LVDS_MODE_JEIDA_MIRROR = 1,
> +	RZG3L_LVDS_MODE_MODE2 = 2,
> +	RZG3L_LVDS_MODE_MODE2_MIRROR = 3,
> +	RZG3L_LVDS_MODE_VESA = 4,
> +	RZG3L_LVDS_MODE_VESA_MIRROR = 5,
> +	RZG3L_LVDS_MODE_MODE6 = 6,
> +	RZG3L_LVDS_MODE_MODE6_MIRROR = 7,
> +};
> +
> +struct rzg3l_lvds {
> +	struct device *dev;
> +	struct reset_control *prstc;
> +	struct reset_control *lvd_rstc;
> +	struct regmap *regmap;
> +
> +	struct drm_bridge bridge;
> +	struct drm_bridge *next_bridge;
> +};
> +
> +#define bridge_to_rzg3l_lvds(b) \
> +	container_of(b, struct rzg3l_lvds, bridge)
> +
> +/* -----------------------------------------------------------------------------
> + * Bridge
> + */
> +static void rzg3l_lvds_atomic_enable(struct drm_bridge *bridge,
> +				     struct drm_atomic_state *state)
> +{
> +	struct rzg3l_lvds *lvds = bridge_to_rzg3l_lvds(bridge);
> +	const struct drm_bridge_state *bridge_state;
> +	int ret;
> +	u32 fmt;
> +
> +	/* Get the LVDS format from the bridge state. */
> +	bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
> +	if (!bridge_state) {
> +		dev_err(lvds->dev, "failed to get bridge state\n");
> +		return;
> +	}
> +
> +	switch (bridge_state->output_bus_cfg.format) {
> +	case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
> +		fmt = RZG3L_LVDS_MODE_JEIDA;
> +		break;
> +	case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
> +		fmt = RZG3L_LVDS_MODE_VESA;
> +		break;
> +	default:
> +		fmt = RZG3L_LVDS_MODE_VESA;
> +		dev_warn(lvds->dev, "Unsupported bus fmt 0x%04x\n",
> +			 bridge_state->output_bus_cfg.format);
> +		break;
> +	}
> +
> +	ret = pm_runtime_resume_and_get(lvds->dev);
> +	if (ret < 0) {
> +		dev_err(lvds->dev, "pm_runtime_resume_and_get error\n");
> +		return;
> +	}
> +
> +	regmap_update_bits(lvds->regmap, LVDS_0_PHY_OFFSET,
> +			   LVDS_0_PHY_CH_EN_BGR, LVDS_0_PHY_CH_EN_BGR);
> +	usleep_range(20, 25);

maybe fsleep()? Same for the above usleep_range()

> +
> +	regmap_update_bits(lvds->regmap, LVDS_0_PHY_OFFSET,
> +			   LVDS_0_PHY_CH_EN_LDO, LVDS_0_PHY_CH_EN_LDO);
> +	usleep_range(10, 15);
> +
> +	regmap_write(lvds->regmap, LVDS_CMN, LVDS_CMN_RST_PHY0_SEL);
> +	regmap_update_bits(lvds->regmap, LVDS_0_CTL_OFFSET,
> +			   LVDS_0_CTL_FMT_SEL_MSK,
> +			   FIELD_PREP(LVDS_0_CTL_FMT_SEL_MSK, fmt));
> +	regmap_update_bits(lvds->regmap, LVDS_0_PHY_OFFSET,
> +			   LVDS_0_PHY_CH_IO_EN_MSK, LVDS_0_PHY_CH_IO_EN);
> +	regmap_write(lvds->regmap, LVDS_CMN,
> +		     LVDS_CMN_RST_PHY0_SEL | LVDS_CMN_PHY_RESET);
> +	usleep_range(100, 150);
> +}
> +
> +static void rzg3l_lvds_atomic_disable(struct drm_bridge *bridge,
> +				      struct drm_atomic_state *state)
> +{
> +	struct rzg3l_lvds *lvds = bridge_to_rzg3l_lvds(bridge);
> +
> +	regmap_update_bits(lvds->regmap, LVDS_CMN, LVDS_CMN_PHY_RESET, 0);
> +	regmap_update_bits(lvds->regmap, LVDS_0_PHY_OFFSET,
> +			   LVDS_0_PHY_CH_IO_EN_MSK, 0);
> +	regmap_update_bits(lvds->regmap, LVDS_0_PHY_OFFSET,
> +			   LVDS_0_PHY_CH_EN_LDO, 0);
> +	regmap_update_bits(lvds->regmap, LVDS_0_PHY_OFFSET,
> +			   LVDS_0_PHY_CH_EN_BGR, 0);
> +
> +	pm_runtime_put(lvds->dev);
> +}
> +
> +static int rzg3l_lvds_attach(struct drm_bridge *bridge,
> +			     struct drm_encoder *encoder,
> +			     enum drm_bridge_attach_flags flags)
> +{
> +	struct rzg3l_lvds *lvds = bridge_to_rzg3l_lvds(bridge);
> +
> +	if (!lvds->next_bridge)
> +		return 0;
> +
> +	return drm_bridge_attach(encoder, lvds->next_bridge, bridge, flags);
> +}
> +
> +static enum drm_mode_status
> +rzg3l_lvds_bridge_mode_valid(struct drm_bridge *bridge,
> +			     const struct drm_display_info *info,
> +			     const struct drm_display_mode *mode)
> +{
> +	if (mode->clock > 87000)
> +		return MODE_CLOCK_HIGH;
> +
> +	if (mode->clock < 25000)
> +		return MODE_CLOCK_LOW;
> +
> +	return MODE_OK;
> +}
> +
> +bool rzg3l_lvds_is_connected(struct drm_bridge *bridge)
> +{
> +	struct rzg3l_lvds *lvds = bridge_to_rzg3l_lvds(bridge);
> +
> +	return !!lvds->next_bridge;
> +}
> +EXPORT_SYMBOL_GPL(rzg3l_lvds_is_connected);
> +
> +static const struct drm_bridge_funcs rzg3l_lvds_bridge_ops = {
> +	.attach = rzg3l_lvds_attach,
> +	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> +	.atomic_reset = drm_atomic_helper_bridge_reset,
> +	.atomic_enable = rzg3l_lvds_atomic_enable,
> +	.atomic_disable = rzg3l_lvds_atomic_disable,
> +	.mode_valid = rzg3l_lvds_bridge_mode_valid,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Power Management
> + */
> +
> +static int rzg3l_lvds_pm_runtime_suspend(struct device *dev)
> +{
> +	struct rzg3l_lvds *lvds = dev_get_drvdata(dev);

You can use:

	struct reset_control_bulk_data resets[] = {
		{ .rstc = lvds->lvd_rstc },
		{ .rstc = lvds->prstc },
	};


	return reset_control_bulk_assert(ARRAY_SIZE(resets), resets);

> +	int ret;
> +
> +	ret = reset_control_assert(lvds->lvd_rstc);
> +	if (ret)
> +		return ret;
> +
> +	ret = reset_control_assert(lvds->prstc);
> +	if (ret)
> +		goto err_deassert_lvd_rstc;
> +
> +	return 0;
> +
> +err_deassert_lvd_rstc:
> +	reset_control_deassert(lvds->lvd_rstc);
> +	return ret;
> +}
> +
> +static int rzg3l_lvds_pm_runtime_resume(struct device *dev)
> +{
> +	struct rzg3l_lvds *lvds = dev_get_drvdata(dev);
> +	int ret;

Same here.

> +
> +	ret = reset_control_deassert(lvds->prstc);
> +	if (ret)
> +		return ret;
> +
> +	return reset_control_deassert(lvds->lvd_rstc);
> +	if (ret)
> +		goto err_assert_prstc;
> +
> +	return 0;
> +
> +err_assert_prstc:
> +	reset_control_assert(lvds->prstc);
> +	return ret;
> +}
> +
> +static const struct dev_pm_ops rzg3l_lvds_pm_ops = {
> +	RUNTIME_PM_OPS(rzg3l_lvds_pm_runtime_suspend,
> +		       rzg3l_lvds_pm_runtime_resume, NULL)
> +	SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Probe & Remove
> + */
> +
> +static int rzg3l_lvds_parse_dt(struct rzg3l_lvds *lvds)
> +{
> +	struct device *dev = lvds->dev;
> +	struct drm_panel *panel;
> +	int ret;
> +
> +	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0,
> +					  &panel, &lvds->next_bridge);

 From documentation of this function:

  * This function is deprecated and should not be used in new drivers. Use 

  * devm_drm_of_get_bridge() instead. 


devm_of_get_bridged() seems to be doing exactly what rzg3l_lvds_parse_dt() is doing.

Thank you,
Claudiu

      parent reply	other threads:[~2026-04-21  9:12 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-17 17:52 [PATCH 0/3] Add support for Renesas " Biju
2026-04-17 17:52 ` [PATCH 1/3] dt-bindings: mfd: syscon: Document the LVDS_CMN syscon for the RZ/G3L Biju
2026-04-20 16:21   ` Conor Dooley
2026-04-17 17:52 ` [PATCH 2/3] dt-bindings: display: bridge: Document Renesas RZ/G3L LVDS encoder Biju
2026-04-20 16:21   ` Conor Dooley
2026-04-17 17:52 ` [PATCH 3/3] drm: renesas: rz-du: Add support for " Biju
2026-04-19 15:58   ` Dmitry Baryshkov
2026-04-21  9:11     ` Claudiu Beznea
2026-04-21 11:22       ` Dmitry Baryshkov
2026-04-22  8:55         ` Claudiu Beznea
2026-04-22  9:09           ` Biju Das
2026-04-22 18:45           ` Dmitry Baryshkov
2026-04-21 16:21     ` Biju Das
2026-04-20  7:31   ` Biju Das
2026-04-21  9:12   ` Claudiu Beznea [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6d223449-8a5e-4565-b026-8c7cf6961343@tuxon.dev \
    --to=claudiu.beznea@tuxon.dev \
    --cc=airlied@gmail.com \
    --cc=biju.das.au@gmail.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert+renesas@glider.be \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=magnus.damm@gmail.com \
    --cc=mripard@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=simona@ffwll.ch \
    --cc=tommaso.merciai.xr@bp.renesas.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®