On 07/20/2022 11:45 PM, Rafał Miłecki wrote: > On 2022-07-21 02:07, William Zhang wrote: >> Add generic bcm94908.dts file. >> >> Signed-off-by: William Zhang >> --- >> >>  arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |  1 + >>  .../boot/dts/broadcom/bcmbca/bcm94908.dts     | 30 +++++++++++++++++++ >>  2 files changed, 31 insertions(+) >>  create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts >> >> diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile >> b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile >> index d30fa75f0611..27741b71ba9e 100644 >> --- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile >> +++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile >> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \ >>                  bcm4906-tplink-archer-c2300-v1.dtb \ >>                  bcm4908-asus-gt-ac5300.dtb \ >>                  bcm4908-netgear-raxe500.dtb \ >> +                bcm94908.dtb \ >>                  bcm4912-asus-gt-ax6000.dtb \ >>                  bcm94912.dtb \ >>                  bcm963158.dtb \ > > AFAIU bcm94908 is a reference board name. I think I see some > inconsistency in naming Broadcom's reference boards DTS files. > > If you take a look at in-kernel DTS files: > find ./arch/arm*/boot/dts/ -name "*.dts" > 99% of them are prefixed with family/SoC name. I did the same for > bcm4908 (and Northstar) boards. So it's > --.dts > e.g. > bcm4908-asus-gt-ac5300.dts > > To match that I *think* you should actually call your file: > bcm4908-bcm94908 (or bcm4908-94908 depending on actual board name) > > First of all: am I correct here? > I do see many dts named in the format you described here and I agree it is very clear. But at Broadcom we use a slight different format for reference boards that we started from day 1: bcm9-.dts such as bcm963138REF.dts. And there are many in the kernel as well if you search "bcm9*.dts". Many of them are Broadcom reference boards and some are actual consumer product. > Secondly: could you do that? I know many DTS files named ignoring SoC/ > family prefix. Still maybe we could change it as some (this) point? I actually was thinking to ask you if we can change all the 4908 boards to use bcm94908- prefix to be consistent with Broadcom board name convention. But at the second thought, I didn't ask because it does not make much benefit other than a uniform name, unless you agree and I can make that change. Otherwise, I would rather keep them as they are now because we have ton of reference boards here and we don't want to make that changes to remove the 9 (which will definitive cause big confusing internally) and there are no rule in linux for the name as far as I know. What I can do is update the bcmbca.yaml to put bcmbca board name rule bcm9-.dts for broadcom reference board and bcm--.dts for customer board, if that sounds good to you.