From: Hans de Goede <hdegoede@redhat.com>
To: Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Len Brown <lenb@kernel.org>, Andy Shevchenko <andy@kernel.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org,
linux-acpi@vger.kernel.org
Subject: Re: [PATCH] ACPI: PMIC: Constify struct pmic_table
Date: Sat, 29 Jun 2024 12:06:12 +0200 [thread overview]
Message-ID: <6e881b24-e1fe-40fe-b19e-69ee0091839f@redhat.com> (raw)
In-Reply-To: <a6c9b1bcdf259adabbcaf91183d3f5ab87a98600.1719644292.git.christophe.jaillet@wanadoo.fr>
Hi,
On 6/29/24 8:58 AM, Christophe JAILLET wrote:
> 'struct pmic_table' is not modified in these drivers.
>
> Constifying this structure moves some data to a read-only section, so
> increase overall security.
>
> On a x86_64, with allmodconfig, as an example:
> Before:
> ======
> text data bss dec hex filename
> 3811 786 0 4597 11f5 drivers/acpi/pmic/intel_pmic_xpower.o
>
> text data bss dec hex filename
> 4147 450 0 4597 11f5 drivers/acpi/pmic/intel_pmic_xpower.o
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> ---
> Compile tested-only
Thanks, patch looks good to me:
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Regards,
Hans
> ---
> drivers/acpi/pmic/intel_pmic.c | 2 +-
> drivers/acpi/pmic/intel_pmic.h | 4 ++--
> drivers/acpi/pmic/intel_pmic_bxtwc.c | 4 ++--
> drivers/acpi/pmic/intel_pmic_bytcrc.c | 4 ++--
> drivers/acpi/pmic/intel_pmic_chtdc_ti.c | 4 ++--
> drivers/acpi/pmic/intel_pmic_chtwc.c | 2 +-
> drivers/acpi/pmic/intel_pmic_xpower.c | 4 ++--
> 7 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c
> index f20dbda1a831..134e9ca8eaa2 100644
> --- a/drivers/acpi/pmic/intel_pmic.c
> +++ b/drivers/acpi/pmic/intel_pmic.c
> @@ -31,7 +31,7 @@ struct intel_pmic_opregion {
>
> static struct intel_pmic_opregion *intel_pmic_opregion;
>
> -static int pmic_get_reg_bit(int address, struct pmic_table *table,
> +static int pmic_get_reg_bit(int address, const struct pmic_table *table,
> int count, int *reg, int *bit)
> {
> int i;
> diff --git a/drivers/acpi/pmic/intel_pmic.h b/drivers/acpi/pmic/intel_pmic.h
> index d956b03a6ca0..006f0780ffab 100644
> --- a/drivers/acpi/pmic/intel_pmic.h
> +++ b/drivers/acpi/pmic/intel_pmic.h
> @@ -21,9 +21,9 @@ struct intel_pmic_opregion_data {
> u32 reg_address, u32 value, u32 mask);
> int (*lpat_raw_to_temp)(struct acpi_lpat_conversion_table *lpat_table,
> int raw);
> - struct pmic_table *power_table;
> + const struct pmic_table *power_table;
> int power_table_count;
> - struct pmic_table *thermal_table;
> + const struct pmic_table *thermal_table;
> int thermal_table_count;
> /* For generic exec_mipi_pmic_seq_element handling */
> int pmic_i2c_address;
> diff --git a/drivers/acpi/pmic/intel_pmic_bxtwc.c b/drivers/acpi/pmic/intel_pmic_bxtwc.c
> index e247615189fa..c332afbf82bd 100644
> --- a/drivers/acpi/pmic/intel_pmic_bxtwc.c
> +++ b/drivers/acpi/pmic/intel_pmic_bxtwc.c
> @@ -24,7 +24,7 @@
> #define VSWITCH1_OUTPUT BIT(4)
> #define VUSBPHY_CHARGE BIT(1)
>
> -static struct pmic_table power_table[] = {
> +static const struct pmic_table power_table[] = {
> {
> .address = 0x0,
> .reg = 0x63,
> @@ -177,7 +177,7 @@ static struct pmic_table power_table[] = {
> } /* MOFF -> MODEMCTRL Bit 0 */
> };
>
> -static struct pmic_table thermal_table[] = {
> +static const struct pmic_table thermal_table[] = {
> {
> .address = 0x00,
> .reg = 0x4F39
> diff --git a/drivers/acpi/pmic/intel_pmic_bytcrc.c b/drivers/acpi/pmic/intel_pmic_bytcrc.c
> index 2b09f8da5400..b4c21a75294a 100644
> --- a/drivers/acpi/pmic/intel_pmic_bytcrc.c
> +++ b/drivers/acpi/pmic/intel_pmic_bytcrc.c
> @@ -16,7 +16,7 @@
>
> #define PMIC_A0LOCK_REG 0xc5
>
> -static struct pmic_table power_table[] = {
> +static const struct pmic_table power_table[] = {
> /* {
> .address = 0x00,
> .reg = ??,
> @@ -134,7 +134,7 @@ static struct pmic_table power_table[] = {
> }, /* V105 -> V1P05S, L2 SRAM */
> };
>
> -static struct pmic_table thermal_table[] = {
> +static const struct pmic_table thermal_table[] = {
> {
> .address = 0x00,
> .reg = 0x75
> diff --git a/drivers/acpi/pmic/intel_pmic_chtdc_ti.c b/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
> index 79f9df552524..ecb36fbc1e7f 100644
> --- a/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
> +++ b/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
> @@ -23,7 +23,7 @@
> #define CHTDC_TI_BPTHERM 0x58
> #define CHTDC_TI_GPADC 0x5a
>
> -static struct pmic_table chtdc_ti_power_table[] = {
> +static const struct pmic_table chtdc_ti_power_table[] = {
> { .address = 0x00, .reg = 0x41 }, /* LDO1 */
> { .address = 0x04, .reg = 0x42 }, /* LDO2 */
> { .address = 0x08, .reg = 0x43 }, /* LDO3 */
> @@ -39,7 +39,7 @@ static struct pmic_table chtdc_ti_power_table[] = {
> { .address = 0x30, .reg = 0x4e }, /* LD14 */
> };
>
> -static struct pmic_table chtdc_ti_thermal_table[] = {
> +static const struct pmic_table chtdc_ti_thermal_table[] = {
> {
> .address = 0x00,
> .reg = CHTDC_TI_GPADC
> diff --git a/drivers/acpi/pmic/intel_pmic_chtwc.c b/drivers/acpi/pmic/intel_pmic_chtwc.c
> index 25aa3e33b09a..81caede51ca2 100644
> --- a/drivers/acpi/pmic/intel_pmic_chtwc.c
> +++ b/drivers/acpi/pmic/intel_pmic_chtwc.c
> @@ -70,7 +70,7 @@
> * "regulator: whiskey_cove: implements Whiskey Cove pmic VRF support"
> * https://github.com/intel-aero/meta-intel-aero/blob/master/recipes-kernel/linux/linux-yocto/0019-regulator-whiskey_cove-implements-WhiskeyCove-pmic-V.patch
> */
> -static struct pmic_table power_table[] = {
> +static const struct pmic_table power_table[] = {
> {
> .address = 0x0,
> .reg = CHT_WC_V1P8A_CTRL,
> diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
> index 43c5850b4bf3..49bda5e0c8aa 100644
> --- a/drivers/acpi/pmic/intel_pmic_xpower.c
> +++ b/drivers/acpi/pmic/intel_pmic_xpower.c
> @@ -26,7 +26,7 @@
> #define AXP288_ADC_TS_CURRENT_ON_ONDEMAND (2 << 0)
> #define AXP288_ADC_TS_CURRENT_ON (3 << 0)
>
> -static struct pmic_table power_table[] = {
> +static const struct pmic_table power_table[] = {
> {
> .address = 0x00,
> .reg = 0x13,
> @@ -129,7 +129,7 @@ static struct pmic_table power_table[] = {
> };
>
> /* TMP0 - TMP5 are the same, all from GPADC */
> -static struct pmic_table thermal_table[] = {
> +static const struct pmic_table thermal_table[] = {
> {
> .address = 0x00,
> .reg = XPOWER_GPADC_LOW
next prev parent reply other threads:[~2024-06-29 10:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-29 6:58 Christophe JAILLET
2024-06-29 10:06 ` Hans de Goede [this message]
2024-07-01 18:12 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6e881b24-e1fe-40fe-b19e-69ee0091839f@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy@kernel.org \
--cc=christophe.jaillet@wanadoo.fr \
--cc=kernel-janitors@vger.kernel.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®