Re: [PATCH v2 3/7] regulator: qcom-pm8008: Add PM8010 mode support

[Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>]

Hi Guru,

On 10/19/2026 1:11 PM, Guru Das Srinagesh wrote:
> On Wed, Oct 14, 2026 at 04:02:00PM +0530, Jishnu Prakash wrote:
>> From: Dhruvin Rajpura <drajpura@qti.qualcomm.com>
>>
>> Implement set_mode/get_mode support for PM8010 LDOs using the mode
>> control and status registers to allow clients to vote for LDO modes.
>> Mode voting is not supported in the PM8008 LDOs.
>>
>> Signed-off-by: Dhruvin Rajpura <drajpura@qti.qualcomm.com>
>> Tested-by: Oleg Keri <okerixx@gmail.com> # Lenovo Yoga Slim 7x Gen 11 (Glymur)
>> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
>> ---
>>  drivers/regulator/qcom-pm8008-regulator.c | 75 ++++++++++++++++++++++++++++++-
>>  1 file changed, 74 insertions(+), 1 deletion(-)
> 
> ...
> 
> Patches 2 and 3 both say "Add PM8010 mode support" in their subject lines and edit
> the same file. Could they either be squashed into one commit or have their subject
> lines amended appropriately to better reflect the changes they are making?
> 

The difference is just one word, patch 2's subject is "Add PM8010 support".

To distinguish them, I'll update patch 3's subject to "Add mode voting support
for PM8010", I hope this is fine.

> Also, patch 3 uses the wrong subject prefix "qcom-pm8008" when git log on the
> regulator driver reveals the convention is to use "pm8008".

I'll fix this in the next patch version.

Thanks,
Jishnu