mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: davem@davemloft.net, "Jakub Kicinski" <kuba@kernel.org>,
	"Eric Dumazet" <edumazet@google.com>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Russell King" <linux@armlinux.org.uk>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	thomas.petazzoni@bootlin.com,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Köry Maincent" <kory.maincent@bootlin.com>,
	"Simon Horman" <horms@kernel.org>,
	"Romain Gantois" <romain.gantois@bootlin.com>,
	"Antoine Tenart" <atenart@kernel.org>,
	"Marek Behún" <kabel@kernel.org>,
	"Sean Anderson" <sean.anderson@linux.dev>,
	"Bjørn Mork" <bjorn@mork.no>
Subject: Re: [PATCH net-next v2 1/2] net: phy: sfp: Add support for SMBus module access
Date: Tue, 25 Feb 2025 14:41:04 +0100	[thread overview]
Message-ID: <6ff4a225-07c0-40f6-9509-c4fa79966266@lunn.ch> (raw)
In-Reply-To: <20250225112043.419189-2-maxime.chevallier@bootlin.com>

On Tue, Feb 25, 2025 at 12:20:39PM +0100, Maxime Chevallier wrote:
> The SFP module's eeprom and internals are accessible through an i2c bus.
> However, all the i2c transfers that are performed are SMBus-style
> transfers for read and write operations.
> 
> It is possible that the SFP might be connected to an SMBus-only
> controller, such as the one found in some PHY devices in the VSC85xx
> family.
> 
> Introduce a set of sfp read/write ops that are going to be used if the
> i2c bus is only capable of doing smbus byte accesses.
> 
> As Single-byte SMBus transaction go against SFF-8472 and breaks the
> atomicity for diagnostics data access, hwmon is disabled in the case
> of SMBus access.
> 
> Moreover, as this may cause other instabilities, print a warning at
> probe time to indicate that the setup may be unreliable because of the
> hardware design.
> 
> Tested-by: Sean Anderson <sean.anderson@linux.dev>
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
> 
> V2: - Added Sean's tested-by
>     - Added a warning indicating that operations won't be reliable, from
>       Russell and Andrew's reviews
>     - Also added a flag saying we're under a single-byte-access bus, to
>       both print the warning and disable hwmon.
> 
>  drivers/net/phy/sfp.c | 79 +++++++++++++++++++++++++++++++++++++++----
>  1 file changed, 73 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
> index 9369f5297769..6e9d3d95eb95 100644
> --- a/drivers/net/phy/sfp.c
> +++ b/drivers/net/phy/sfp.c
> @@ -282,6 +282,7 @@ struct sfp {
>  	unsigned int rs_state_mask;
>  
>  	bool have_a2;
> +	bool single_byte_access;
>  
>  	const struct sfp_quirk *quirk;
>  
> @@ -690,14 +691,70 @@ static int sfp_i2c_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
>  	return ret == ARRAY_SIZE(msgs) ? len : 0;
>  }
>  
> -static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
> +static int sfp_smbus_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,

Maybe call this sfp_smbus_byte_read(), leaving space for
sfp_smbus_word_read() in the future.

> +			  size_t len)
>  {
> -	if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
> -		return -EINVAL;
> +	u8 bus_addr = a2 ? 0x51 : 0x50;
> +	union i2c_smbus_data smbus_data;
> +	u8 *data = buf;
> +	int ret;
> +
> +	while (len) {
> +		ret = i2c_smbus_xfer(sfp->i2c, bus_addr, 0,
> +				     I2C_SMBUS_READ, dev_addr,
> +				     I2C_SMBUS_BYTE_DATA, &smbus_data);
> +		if (ret < 0)
> +			return ret;

Isn't this the wrong order? You should do the upper byte first, then
the lower?


    Andrew

---
pw-bot: cr

  reply	other threads:[~2025-02-25 13:41 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-25 11:20 [PATCH net-next v2 0/2] net: phy: sfp: Add single-byte SMBus SFP access Maxime Chevallier
2025-02-25 11:20 ` [PATCH net-next v2 1/2] net: phy: sfp: Add support for SMBus module access Maxime Chevallier
2025-02-25 13:41   ` Andrew Lunn [this message]
2025-02-25 13:56     ` Maxime Chevallier
2025-02-25 14:58       ` Andrew Lunn
2025-02-25 18:23         ` Russell King (Oracle)
2025-02-25 18:06       ` Russell King (Oracle)
2025-02-25 18:04   ` Russell King (Oracle)
2025-02-25 18:20     ` Maxime Chevallier
2025-02-25 18:41     ` Sean Anderson
2025-02-25 18:48       ` Maxime Chevallier
2025-03-08 18:42   ` Maxime Chevallier
2025-02-25 11:20 ` [PATCH net-next v2 2/2] net: mdio: mdio-i2c: Add support for single-byte SMBus operations Maxime Chevallier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6ff4a225-07c0-40f6-9509-c4fa79966266@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=atenart@kernel.org \
    --cc=bjorn@mork.no \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=kabel@kernel.org \
    --cc=kory.maincent@bootlin.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=maxime.chevallier@bootlin.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=romain.gantois@bootlin.com \
    --cc=sean.anderson@linux.dev \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®