Re: Crash with 3c59x.o

[Sean Neakums <sneakums@zork.net>]

commence  Hans-Joachim Baader quotation:

> lspci:
> 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
> 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
> 00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
> 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
> 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
> 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
> 00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
> 00:0b.0 Serial controller: NetMos Technology 222N-2 I/O Card (2S+1P) (rev 01)
> 00:0f.0 Ethernet controller: 3Com Corporation 3c590 10BaseT [Vortex]
> 00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 / HPT370 (rev 01)
> 00:13.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366 / HPT370 (rev 01)
>
> As you can see, there are two 3Com cards which are both recognized by the
> driver.

Possibly this is not what you meant, but lspci output does not
indicate whether a PCI device has been recognised by a driver or not.
You would need to check e.g. dmesg output or ifconfig -a after loading
the driver module to verify that it sees both cards.

-- 
 /                          |
[|] Sean Neakums            |  Questions are a burden to others;
[|] <sneakums@zork.net>     |      answers a prison for oneself.
 \                          |