Hi, I run into this irq nobody care problem on a dell vostro 200 machine. I test the latest git tree. The problem is there as well. I also update the BIOS to the latest version. Doesn't help either. It seem the IRQ in question is shared between UHCI and SATA controller. So I am not sure it is a SATA problem or a USB problem. usb 4-2: new full speed USB device using uhci_hcd and address 2 irq 19: nobody cared (try booting with the "irqpoll" option) Pid: 427, comm: nash-hotplug Not tainted 2.6.27-rc6 #1 [] __report_bad_irq+0x2e/0x6f [] note_interrupt+0x1c9/0x21b [] ? handle_IRQ_event+0x2a/0x5a [] handle_fasteoi_irq+0x99/0xc0 [] ? handle_fasteoi_irq+0x0/0xc0 [] do_IRQ+0x9a/0xc4 [] common_interrupt+0x23/0x28 [] ? sysenter_past_esp+0x3a/0x62 [] ? serial8250_probe+0x169/0x1c0 ======================= I attached the kernel config file, dmesg and /proc/interrupts. Any suggestions? I am willing to try fancy patches. Thanks Chris