From: Krystian Hebel <krystian.hebel@3mdeb.com>
To: Daniel Kiper <daniel.kiper@oracle.com>,
grub-devel@gnu.org, linux-kernel@vger.kernel.org,
trenchboot-devel@googlegroups.com, x86@kernel.org
Cc: alexander.burmashev@oracle.com, andrew.cooper3@citrix.com,
ard.biesheuvel@linaro.org, dpsmith@apertussolutions.com,
eric.snowberg@oracle.com, javierm@redhat.com,
kanth.ghatraju@oracle.com, konrad.wilk@oracle.com,
lukasz.hawrylko@linux.intel.com, michal.zygowski@3mdeb.com,
mjg59@google.com, phcoder@gmail.com, pirot.krol@3mdeb.com,
pjones@redhat.com, ross.philipson@oracle.com
Subject: Re: [GRUB PATCH RFC 15/18] i386/txt: Add Intel TXT core implementation
Date: Fri, 22 May 2020 15:24:01 +0200 [thread overview]
Message-ID: <7056a782-714a-c3e9-7c5b-9659c67e9949@3mdeb.com> (raw)
In-Reply-To: <20200504232132.23570-16-daniel.kiper@oracle.com>
On 05.05.2020 01:21, Daniel Kiper wrote:
> +static grub_err_t
> +init_txt_heap (struct grub_slaunch_params *slparams, struct grub_txt_acm_header *sinit)
> +{
> + grub_uint8_t *txt_heap;
> + grub_uint32_t os_sinit_data_ver, sinit_caps;
> + grub_uint64_t *size;
> + struct grub_txt_os_mle_data *os_mle_data;
> + struct grub_txt_os_sinit_data *os_sinit_data;
> + struct grub_txt_heap_end_element *heap_end_element;
> + struct grub_txt_heap_event_log_pointer2_1_element *heap_event_log_pointer2_1_element;
> +#ifdef GRUB_MACHINE_EFI
> + struct grub_acpi_rsdp_v20 *rsdp;
> +#endif
> +
> + /* BIOS data already verified in grub_txt_verify_platform(). */
> +
> + txt_heap = grub_txt_get_heap ();
> +
> + /* OS/loader to MLE data. */
> +
> + os_mle_data = grub_txt_os_mle_data_start (txt_heap);
> + size = (grub_uint64_t *) ((grub_addr_t) os_mle_data - sizeof (grub_uint64_t));
There is 'grub_txt_os_mle_data_size()' in previous patch, it would look
better.
> + *size = sizeof (*os_mle_data) + sizeof (grub_uint64_t);
> +
> + grub_memset (os_mle_data, 0, sizeof (*os_mle_data));
> +
> + os_mle_data->version = GRUB_SL_OS_MLE_STRUCT_VERSION;
> + os_mle_data->zero_page_addr = (grub_uint32_t)(grub_addr_t) slparams->params;
> + os_mle_data->saved_misc_enable_msr = grub_rdmsr (GRUB_MSR_X86_MISC_ENABLE);
> +
> + os_mle_data->ap_wake_block = slparams->ap_wake_block;
> +
> + save_mtrrs (os_mle_data);
> +
> + /* OS/loader to SINIT data. */
> +
> + os_sinit_data_ver = grub_txt_supported_os_sinit_data_ver (sinit);
> +
> + if (os_sinit_data_ver < OS_SINIT_DATA_MIN_VER)
> + return grub_error (GRUB_ERR_BAD_DEVICE,
> + N_("unsupported OS to SINIT data version in SINIT ACM: %d"
> + " expected >= %d"), os_sinit_data_ver, OS_SINIT_DATA_MIN_VER);
> +
> + os_sinit_data = grub_txt_os_sinit_data_start (txt_heap);
> + size = (grub_uint64_t *) ((grub_addr_t) os_sinit_data - sizeof (grub_uint64_t));
Ditto
> +
> + *size = sizeof(grub_uint64_t) + sizeof (struct grub_txt_os_sinit_data) +
> + sizeof (struct grub_txt_heap_end_element);
> +
> + if (grub_get_tpm_ver () == GRUB_TPM_12)
> + *size += sizeof (struct grub_txt_heap_tpm_event_log_element);
> + else if (grub_get_tpm_ver () == GRUB_TPM_20)
> + *size += sizeof (struct grub_txt_heap_event_log_pointer2_1_element);
> + else
> + return grub_error (GRUB_ERR_BAD_DEVICE, N_("unsupported TPM version"));
> +
> + grub_memset (os_sinit_data, 0, *size);
> +
> +#ifdef GRUB_MACHINE_EFI
> + rsdp = grub_acpi_get_rsdpv2 ();
> +
> + if (rsdp == NULL)
> + return grub_printf ("WARNING: ACPI RSDP 2.0 missing\n");
> +
> + os_sinit_data->efi_rsdt_ptr = (grub_uint64_t)(grub_addr_t) rsdp;
> +#endif
> +
> + os_sinit_data->mle_ptab = slparams->mle_ptab_target;
> + os_sinit_data->mle_size = slparams->mle_size;
> +
> + os_sinit_data->mle_hdr_base = slparams->mle_header_offset;
> +
> + /* TODO: Check low PMR with RMRR. Look at relevant tboot code too. */
> + /* TODO: Kernel should not allocate any memory outside of PMRs regions!!! */
> + os_sinit_data->vtd_pmr_lo_base = 0;
> + os_sinit_data->vtd_pmr_lo_size = ALIGN_DOWN (grub_mmap_get_highest (0x100000000),
> + GRUB_TXT_PMR_ALIGN);
> +
> + os_sinit_data->vtd_pmr_hi_base = ALIGN_UP (grub_mmap_get_lowest (0x100000000),
> + GRUB_TXT_PMR_ALIGN);
> + os_sinit_data->vtd_pmr_hi_size = ALIGN_DOWN (grub_mmap_get_highest (0xffffffffffffffff),
> + GRUB_TXT_PMR_ALIGN);
> + os_sinit_data->vtd_pmr_hi_size -= os_sinit_data->vtd_pmr_hi_base;
Could it be done with just one PMR, from 0 to top of memory, or would
TXT complain?
> +
> + grub_dprintf ("slaunch",
> + "vtd_pmr_lo_base: 0x%" PRIxGRUB_UINT64_T " vtd_pmr_lo_size: 0x%"
> + PRIxGRUB_UINT64_T " vtd_pmr_hi_base: 0x%" PRIxGRUB_UINT64_T
> + " vtd_pmr_hi_size: 0x%" PRIxGRUB_UINT64_T "\n",
> + os_sinit_data->vtd_pmr_lo_base, os_sinit_data->vtd_pmr_lo_size,
> + os_sinit_data->vtd_pmr_hi_base, os_sinit_data->vtd_pmr_hi_size);
> +
>
> <snip>
>
> +/*
> + * The MLE page tables have to be below the MLE and have no special regions in
> + * between them and the MLE (this is a bit of an unwritten rule).
> + * 20 pages are carved out of memory below the MLE. That leave 18 page table
> + * pages that can cover up to 36M .
> + * can only contain 4k pages
> + *
> + * TODO: TXT Spec p.32; List section name and number with PT MLE requirments here.
> + *
> + * TODO: This function is not able to cover MLEs larger than 1 GiB. Fix it!!!
> + * After fixing inrease GRUB_TXT_MLE_MAX_SIZE too.
> + */
What do you mean by "special regions"? In TXT spec it is written that
there may be no holes
in the virtual address space:
"There may not be any invalid (not-present) page table entries after the
first valid
entry (i.e. there may not be any gaps in the MLE’s linear address space)."
Also that spec:
"A breadth-first search of page tables must produce increasing physical
addresses."
Maybe I misunderstood, but does it mean that the paging structures
themselves cannot
be mapped? Or does it apply to the page tables only, not to the
addresses of pages in PTEs?
> +void
> +grub_txt_setup_mle_ptab (struct grub_slaunch_params *slparams)
> +{
> + grub_uint8_t *pg_dir, *pg_dir_ptr_tab = slparams->mle_ptab_mem, *pg_tab;
IMHO using 'grub_uint64_t' would result in less type casting and cleaner
code below.
> + grub_uint32_t mle_off = 0, pd_off = 0;
> + grub_uint64_t *pde, *pte;
> +
> + grub_memset (pg_dir_ptr_tab, 0, slparams->mle_ptab_size);
> +
> + pg_dir = pg_dir_ptr_tab + GRUB_PAGE_SIZE;
> + pg_tab = pg_dir + GRUB_PAGE_SIZE;
> +
> + /* Only use first entry in page dir ptr table */
> + *(grub_uint64_t *)pg_dir_ptr_tab = MAKE_PT_MLE_ENTRY(pg_dir);
> +
> + /* Start with first entry in page dir */
> + *(grub_uint64_t *)pg_dir = MAKE_PT_MLE_ENTRY(pg_tab);
> +
> + pte = (grub_uint64_t *)pg_tab;
> + pde = (grub_uint64_t *)pg_dir;
> +
> + do
> + {
> + *pte = MAKE_PT_MLE_ENTRY(slparams->mle_start + mle_off);
> +
> + pte++;
> + mle_off += GRUB_PAGE_SIZE;
> +
> + if (!(++pd_off % 512))
> + {
> + /* Break if we don't need any additional page entries */
> + if (mle_off >= slparams->mle_size)
> + break;
> + pde++;
> + *pde = MAKE_PT_MLE_ENTRY(pte);
> + }
> + } while (mle_off < slparams->mle_size);
> +}
>
> <snip>
>
> +grub_err_t
> +grub_txt_boot_prepare (struct grub_slaunch_params *slparams)
> +{
> + grub_err_t err;
> + struct grub_txt_mle_header *mle_header;
> + struct grub_txt_acm_header *sinit_base;
> +
> + sinit_base = grub_txt_sinit_select (grub_slaunch_module ());
> +
> + if (sinit_base == NULL)
> + return grub_errno;
> +
> + err = init_txt_heap (slparams, sinit_base);
> +
> + if (err != GRUB_ERR_NONE)
> + return err;
> +
> + /* Update the MLE header. */
> + mle_header = (struct grub_txt_mle_header *)(grub_addr_t) (slparams->mle_start + slparams->mle_header_offset);
> + mle_header->first_valid_page = 0;
> + mle_header->mle_end = slparams->mle_size;
> +
> + slparams->sinit_acm_base = (grub_uint32_t)(grub_addr_t) sinit_base;
> + slparams->sinit_acm_size = sinit_base->size * 4;
> +
> + grub_tpm_relinquish_lcl (0);
> +
> + err = set_mtrrs_for_acmod (sinit_base);
> + if (err)
> + return grub_error (err, N_("secure launch failed to set MTRRs for ACM"));
> +
> + err = grub_txt_prepare_cpu ();
> + if ( err )
> + return err;
> +
> + if (!(grub_rdmsr (GRUB_MSR_X86_APICBASE) & GRUB_MSR_X86_APICBASE_BSP))
> + return grub_error (GRUB_ERR_BAD_DEVICE, N_("secure launch must run on BSP"));
This test should be the first one, before messing with TPM and MTTRs.
> +
> + return GRUB_ERR_NONE;
> +}
Best regards,
--
Krystian Hebel
Firmware Engineer
https://3mdeb.com | @3mdeb_com
next prev parent reply other threads:[~2020-05-22 13:35 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-04 23:21 [GRUB PATCH RFC 00/18] i386: Intel TXT secure launcher Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 01/18] i386/msr: Merge rdmsr.h and wrmsr.h into msr.h Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 02/18] i386/msr: Rename grub_msr_read() and grub_msr_write() Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 03/18] i386/msr: Extract and improve MSR support detection code Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 04/18] i386/memory: Rename PAGE_SHIFT to GRUB_PAGE_SHIFT Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 05/18] i386/memory: Rename PAGE_SIZE to GRUB_PAGE_SIZE and make it global Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 06/18] mmap: Add grub_mmap_get_lowest() and grub_mmap_get_highest() Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 07/18] i386/tpm: Rename tpm module to tpm_verifier Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 08/18] i386/tpm: Add TPM TIS and CRB driver Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 09/18] efi: Make shim_lock GUID and protocol type public Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 10/18] efi: Return grub_efi_status_t from grub_efi_get_variable() Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 11/18] efi: Add a function to read EFI variables with attributes Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 12/18] i386/efi: Report UEFI Secure Boot status to the Linux kernel Daniel Kiper
2020-05-05 17:29 ` Matthew Garrett
2020-05-06 13:33 ` Daniel Kiper
2020-05-06 18:36 ` Matthew Garrett
2020-05-07 10:46 ` Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 13/18] i386/slaunch: Add basic platform support for secure launch Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 14/18] i386/txt: Add Intel TXT definitions header file Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 15/18] i386/txt: Add Intel TXT core implementation Daniel Kiper
2020-05-22 13:24 ` Krystian Hebel [this message]
2020-06-01 14:16 ` Ross Philipson
2020-05-04 23:21 ` [GRUB PATCH RFC 16/18] i386/txt: Add Intel TXT ACM module support Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 17/18] i386/txt: Add Intel TXT verification routines Daniel Kiper
2020-05-04 23:21 ` [GRUB PATCH RFC 18/18] i386/slaunch: Add secure launch framework and commands Daniel Kiper
2020-05-05 14:38 ` [GRUB PATCH RFC 00/18] i386: Intel TXT secure launcher Lukasz Hawrylko
2020-05-07 11:06 ` Daniel Kiper
2020-05-13 13:47 ` Lukasz Hawrylko
2020-06-01 15:32 ` Daniel P. Smith
2020-06-01 16:51 ` Andy Lutomirski
2020-06-01 17:56 ` Daniel P. Smith
2020-06-01 18:03 ` Ross Philipson
2020-06-01 19:39 ` Andy Lutomirski
2020-06-02 0:13 ` Daniel P. Smith
2020-06-02 0:49 ` Andy Lutomirski
2020-06-02 1:29 ` Daniel P. Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7056a782-714a-c3e9-7c5b-9659c67e9949@3mdeb.com \
--to=krystian.hebel@3mdeb.com \
--cc=alexander.burmashev@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=ard.biesheuvel@linaro.org \
--cc=daniel.kiper@oracle.com \
--cc=dpsmith@apertussolutions.com \
--cc=eric.snowberg@oracle.com \
--cc=grub-devel@gnu.org \
--cc=javierm@redhat.com \
--cc=kanth.ghatraju@oracle.com \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lukasz.hawrylko@linux.intel.com \
--cc=michal.zygowski@3mdeb.com \
--cc=mjg59@google.com \
--cc=phcoder@gmail.com \
--cc=pirot.krol@3mdeb.com \
--cc=pjones@redhat.com \
--cc=ross.philipson@oracle.com \
--cc=trenchboot-devel@googlegroups.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®