mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ardelean, Alexandru" <alexandru.Ardelean@analog.com>
To: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
	"hverkuil-cisco@xs4all.nl" <hverkuil-cisco@xs4all.nl>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "mchehab@kernel.org" <mchehab@kernel.org>,
	"Bogdan, Dragos" <Dragos.Bogdan@analog.com>
Subject: Re: [PATCH v2] media: adv7604: extend deep color mode to ADV7611
Date: Tue, 26 Nov 2019 06:28:44 +0000	[thread overview]
Message-ID: <705cd4a40c2e7a1d3d613a9fef093d4fd4792775.camel@analog.com> (raw)
In-Reply-To: <5278491a-5d48-b171-2194-fe4806397424@xs4all.nl>

On Mon, 2019-11-25 at 17:05 +0100, Hans Verkuil wrote:
> On 11/25/19 4:06 PM, Ardelean, Alexandru wrote:
> > On Fri, 2019-10-18 at 14:29 +0300, Alexandru Ardelean wrote:
> > > From: Dragos Bogdan <dragos.bogdan@analog.com>
> > > 
> > > The AD7611 chip supports the same Deep Color Mode settings as the
> > > AD7604.
> > > This change extends support for this feature to the AD7611 by adding
> > > a
> > > wrapper function for the `read_hdmi_pixelclock` hook and adding the
> > > same
> > > frequency adjustment logic.
> > > 
> > 
> > ping here
> 
> Not forgotten, it's on my TODO list. But I need some time to dig a bit
> deeper into this code.

Ack.

Thanks for replying.

Alex

> 
> Regards,
> 
> 	Hans
> 
> > > Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
> > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> > > ---
> > > 
> > > Changelog v1 -> v2:
> > > * address checkpatch complaints about 80 col limit and
> > >   use of `unsigned` vs `unsigned int`
> > > 
> > >  drivers/media/i2c/adv7604.c | 32 +++++++++++++++++++++-----------
> > >  1 file changed, 21 insertions(+), 11 deletions(-)
> > > 
> > > diff --git a/drivers/media/i2c/adv7604.c
> > > b/drivers/media/i2c/adv7604.c
> > > index 28a84bf9f8a9..c6fe3aa69733 100644
> > > --- a/drivers/media/i2c/adv7604.c
> > > +++ b/drivers/media/i2c/adv7604.c
> > > @@ -1503,23 +1503,14 @@ static void
> > > adv76xx_fill_optional_dv_timings_fields(struct v4l2_subdev *sd,
> > >  
> > >  static unsigned int adv7604_read_hdmi_pixelclock(struct v4l2_subdev
> > > *sd)
> > >  {
> > > -	unsigned int freq;
> > >  	int a, b;
> > >  
> > >  	a = hdmi_read(sd, 0x06);
> > >  	b = hdmi_read(sd, 0x3b);
> > >  	if (a < 0 || b < 0)
> > >  		return 0;
> > > -	freq =  a * 1000000 + ((b & 0x30) >> 4) * 250000;
> > >  
> > > -	if (is_hdmi(sd)) {
> > > -		/* adjust for deep color mode */
> > > -		unsigned bits_per_channel = ((hdmi_read(sd, 0x0b) & 0x60)
> > > > > 4) + 8;
> > > -
> > > -		freq = freq * 8 / bits_per_channel;
> > > -	}
> > > -
> > > -	return freq;
> > > +	return a * 1000000 + ((b & 0x30) >> 4) * 250000;
> > >  }
> > >  
> > >  static unsigned int adv7611_read_hdmi_pixelclock(struct v4l2_subdev
> > > *sd)
> > > @@ -1530,9 +1521,28 @@ static unsigned int
> > > adv7611_read_hdmi_pixelclock(struct v4l2_subdev *sd)
> > >  	b = hdmi_read(sd, 0x52);
> > >  	if (a < 0 || b < 0)
> > >  		return 0;
> > > +
> > >  	return ((a << 1) | (b >> 7)) * 1000000 + (b & 0x7f) * 1000000 /
> > > 128;
> > >  }
> > >  
> > > +static unsigned int adv76xx_read_hdmi_pixelclock(struct v4l2_subdev
> > > *sd)
> > > +{
> > > +	struct adv76xx_state *state = to_state(sd);
> > > +	const struct adv76xx_chip_info *info = state->info;
> > > +	unsigned int freq, bits_per_channel, pixelrepetition;
> > > +
> > > +	freq = info->read_hdmi_pixelclock(sd);
> > > +	if (is_hdmi(sd)) {
> > > +		/* adjust for deep color mode and pixel repetition */
> > > +		bits_per_channel = ((hdmi_read(sd, 0x0b) & 0x60) >> 4) + 8;
> > > +		pixelrepetition = (hdmi_read(sd, 0x05) & 0x0f) + 1;
> > > +
> > > +		freq = freq * 8 / bits_per_channel / pixelrepetition;
> > > +	}
> > > +
> > > +	return freq;
> > > +}
> > > +
> > >  static int adv76xx_query_dv_timings(struct v4l2_subdev *sd,
> > >  			struct v4l2_dv_timings *timings)
> > >  {
> > > @@ -1579,7 +1589,7 @@ static int adv76xx_query_dv_timings(struct
> > > v4l2_subdev *sd,
> > >  
> > >  		bt->width = w;
> > >  		bt->height = h;
> > > -		bt->pixelclock = info->read_hdmi_pixelclock(sd);
> > > +		bt->pixelclock = adv76xx_read_hdmi_pixelclock(sd);
> > >  		bt->hfrontporch = hdmi_read16(sd, 0x20, info-
> > > > hfrontporch_mask);
> > >  		bt->hsync = hdmi_read16(sd, 0x22, info->hsync_mask);
> > >  		bt->hbackporch = hdmi_read16(sd, 0x24, info-
> > > > hbackporch_mask);

      reply	other threads:[~2019-11-26  6:28 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-18 11:21 [PATCH] " Alexandru Ardelean
2019-10-18 11:29 ` [PATCH v2] " Alexandru Ardelean
2019-11-25 15:06   ` Ardelean, Alexandru
2019-11-25 16:05     ` Hans Verkuil
2019-11-26  6:28       ` Ardelean, Alexandru [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=705cd4a40c2e7a1d3d613a9fef093d4fd4792775.camel@analog.com \
    --to=alexandru.ardelean@analog.com \
    --cc=Dragos.Bogdan@analog.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®