Re: [PATCH 2/2] arm64: dts: ti: iot2050: Add overlays for M.2 used by firmware

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 28/08/2024 07:39, Jan Kiszka wrote:
> On 27.08.24 19:30, Krzysztof Kozlowski wrote:
>> On 27/08/2024 18:20, Jan Kiszka wrote:
>>> On 27.08.24 17:33, Rob Herring wrote:
>>>> On Mon, Aug 26, 2024 at 9:29 AM Jan Kiszka <jan.kiszka@siemens.com> wrote:
>>>>>
>>>>> From: Jan Kiszka <jan.kiszka@siemens.com>
>>>>>
>>>>> To allow firmware to pick up all DTs from here, move the overlays that
>>>>> are normally applied during DT fixup to the kernel source as well. Hook
>>>>> then into the build nevertheless to ensure that regular checks are
>>>>> performed.
>>>>>
>>>>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>>>>> ---
>>>>>  arch/arm64/boot/dts/ti/Makefile               |  2 +
>>>>>  ...48-iot2050-advanced-m2-bkey-ekey-pcie.dtso | 27 +++++++++++
>>>>>  ...-am6548-iot2050-advanced-m2-bkey-usb3.dtso | 47 +++++++++++++++++++
>>>>>  3 files changed, 76 insertions(+)
>>>>>  create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtso
>>>>>  create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-usb3.dtso
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
>>>>> index e20b27ddf901..f459af7fac0d 100644
>>>>> --- a/arch/arm64/boot/dts/ti/Makefile
>>>>> +++ b/arch/arm64/boot/dts/ti/Makefile
>>>>> @@ -77,6 +77,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
>>>>>  dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
>>>>>  dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
>>>>>  dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
>>>>> +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtbo
>>>>> +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2-bkey-usb3.dtbo
>>>>
>>>> You are missing applying these overlays to anything. That is a
>>>> requirement for any overlay in the tree.
>>>
>>> You mean apply for testing purposes? How, technically?
>>
>> Apply as build a target combining base DTS and overlay. See all other
>> overlays for technical aspect (just do the same).
>>
> 
> OK, it's about the magic behind the -dtbs vars.
> 
> BTW, it's not "all". I would say about 10% of the overlays are "dangling".

Yeah, true. There were several commits adding targets for base+overlay,
but probably still not everything is corrected, so my "all" was exaggerated.

Best regards,
Krzysztof