mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nilay Shroff <nilay@linux.ibm.com>
To: Qiliang Yuan <qiliang.yuan@linux.dev>,
	Keith Busch <kbusch@kernel.org>, Jens Axboe <axboe@kernel.dk>,
	Christoph Hellwig <hch@lst.de>, Sagi Grimberg <sagi@grimberg.me>,
	Hannes Reinecke <hare@suse.de>
Cc: linux-nvme@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/2] nvme-multipath: apply delayed_removal_secs changes to a pending removal
Date: Wed, 18 Nov 2026 13:21:53 +0530	[thread overview]
Message-ID: <712711ce-558b-4d58-b5e3-fe0a31eb8986@linux.ibm.com> (raw)
In-Reply-To: <20261114-bug-nvme-mpath-set-live-srcu-v3-1-d84651de6334@linux.dev>

On 11/15/26 7:45 AM, Qiliang Yuan wrote:
> With delayed_removal_secs set, removing the last path of a namespace
> head doesn't delete the head right away. nvme_mpath_remove_disk()
> queues remove_work with the configured delay, and bios submitted in the
> meantime wait on head->requeue_list in case a path comes back.
> 
> A write to delayed_removal_secs only takes effect for removals that
> start later. A removal that is already pending keeps the old delay, so
> clearing the attribute leaves the queued bios waiting until that delay
> expires instead of failing them, and lowering or raising it doesn't
> move the pending removal either.
> 
> Requeue a pending remove_work with the new delay when the attribute is
> written. Cancel it first so that the module reference taken for it
> carries over, as nvme_init_ns_head() does when a path comes back.
> 
> With delayed_removal_secs set and no path left, the attribute is
> changed two seconds later and the head is removed after (mean of two
> runs, min-max in parentheses):
> 
>    delay (s)  before (ms)            after (ms)             change
>    30 -> 0    26510 (26053-26967)        8 (8-8)            -99.97%
>    30 -> 5    27994 (27457-28531)     6194 (5589-6798)      -78%
>    10 -> 30    8131 (8086-8176)      29802 (29522-30082)    +267%
> 
> A direct read queued before the 30 -> 0 write fails after:
> 
>    before (ms)            after (ms)   change
>    26466 (26017-26915)    4 (4-4)      -99.98%
> 
> Fixes: 62188639ec160 ("nvme-multipath: introduce delayed removal of the multipath head node")
> Suggested-by: Nilay Shroff <nilay@linux.ibm.com>
> Signed-off-by: Qiliang Yuan <qiliang.yuan@linux.dev>
> ---
>   drivers/nvme/host/multipath.c | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
> index ae8059366b57d..35278b9c4de60 100644
> --- a/drivers/nvme/host/multipath.c
> +++ b/drivers/nvme/host/multipath.c
> @@ -1242,6 +1242,9 @@ static ssize_t delayed_removal_secs_store(struct device *dev,
>   	mutex_lock(&head->subsys->lock);
>   	head->delayed_removal_secs = sec;
>   	assign_bit(NVME_NSHEAD_QUEUE_IF_NO_PATH, &head->flags, sec);
> +	/* Apply the new delay to a removal that is already pending */
> +	if (cancel_delayed_work(&head->remove_work))
> +		queue_delayed_work(nvme_wq, &head->remove_work, sec * HZ);
>   	mutex_unlock(&head->subsys->lock);
>   	/*
>   	 * Ensure that update to NVME_NSHEAD_QUEUE_IF_NO_PATH is seen
> 

Above change is good however still we have a race which needs to be addressed
as reported by sashiko here:
https://sashiko.dev/#/patchset/20261114-bug-nvme-mpath-set-live-srcu-v3-0-d84651de6334%40linux.dev?part=1?

Can you please address it?

Thanks,
--Nilay


  reply	other threads:[~2026-11-18  7:52 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-15  2:15 [PATCH v3 0/2] nvme-multipath: requeue work fixes Qiliang Yuan
2026-11-15  2:15 ` [PATCH v3 1/2] nvme-multipath: apply delayed_removal_secs changes to a pending removal Qiliang Yuan
2026-11-18  7:51   ` Nilay Shroff [this message]
2026-11-15  2:15 ` [PATCH v3 2/2] nvme-multipath: don't wait for a grace period in nvme_mpath_set_live() Qiliang Yuan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=712711ce-558b-4d58-b5e3-fe0a31eb8986@linux.ibm.com \
    --to=nilay@linux.ibm.com \
    --cc=axboe@kernel.dk \
    --cc=hare@suse.de \
    --cc=hch@lst.de \
    --cc=kbusch@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=qiliang.yuan@linux.dev \
    --cc=sagi@grimberg.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®