Re: [PATCH net-next v8 2/2] net: ti: icssg_prueth: add TAPRIO offload support

[Jacob Keller <jacob.e.keller@intel.com>]

On 5/29/2024 4:05 AM, MD Danish Anwar wrote:
> From: Roger Quadros <rogerq@ti.com>
> 
> The ICSSG dual-emac / switch firmware supports Enhanced Scheduled Traffic
> (EST – defined in P802.1Qbv/D2.2 that later got included in IEEE
> 802.1Q-2018) configuration. EST allows express queue traffic to be
> scheduled (placed) on the wire at specific repeatable time intervals. In
> Linux kernel, EST configuration is done through tc command and the taprio
> scheduler in the net core implements a software only scheduler
> (SCH_TAPRIO). If the NIC is capable of EST configuration,user indicate
> "flag 2" in the command which is then parsed by taprio scheduler in net
> core and indicate that the command is to be offloaded to h/w. taprio then
> offloads the command to the driver by calling ndo_setup_tc() ndo ops. This
> patch implements ndo_setup_tc() to offload EST configuration to ICSSG.
> 
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> Reviewed-by: Simon Horman <horms@kernel.org>
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> ---

I tried to apply this series to review it. Unfortunately It no longer
applies cleanly since it has textual conflicts with 972383aecf43 ("net:
ti: icssg-switch: Add switchdev based driver for ethernet switch
support"), which was part of:

https://lore.kernel.org/netdev/20240528113734.379422-1-danishanwar@ti.com/

The conflict seemed easy enough to resolve, but I'm not sure if the
prueth_qos structure would be placed optimally. I tried to build the
driver to check what the placement should be and was unable to get
things to compile.