From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Michael Ellerman <mpe@ellerman.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
j.neuschaefer@gmx.net
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v4 04/16] powerpc/mm/32s: use generic mmu_mapin_ram() for all blocks.
Date: Thu, 21 Feb 2019 19:02:45 +0000 [thread overview]
Message-ID: <719e3340-dd91-9504-d39c-4257e1bf0282@c-s.fr> (raw)
In-Reply-To: <87o9755jy2.fsf@concordia.ellerman.id.au>
On 02/21/2019 01:51 PM, Michael Ellerman wrote:
> Christophe Leroy <christophe.leroy@c-s.fr> writes:
>
>> Now that mmu_mapin_ram() is able to handle other blocks
>> than the one starting at 0, the WII can use it for all
>> its blocks.
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>> ---
>> arch/powerpc/mm/pgtable_32.c | 27 +++++++++------------------
>> 1 file changed, 9 insertions(+), 18 deletions(-)
>>
>> diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
>> index b4858818523f..2bf9bf8867d4 100644
>> --- a/arch/powerpc/mm/pgtable_32.c
>> +++ b/arch/powerpc/mm/pgtable_32.c
>> @@ -254,26 +254,17 @@ static void __init __mapin_ram_chunk(unsigned long offset, unsigned long top)
>>
>> void __init mapin_ram(void)
>> {
>> - unsigned long s, top;
>> -
>> -#ifndef CONFIG_WII
>> - top = total_lowmem;
>> - s = mmu_mapin_ram(0, top);
>> - __mapin_ram_chunk(s, top);
>> -#else
>> - if (!wii_hole_size) {
>> - s = mmu_mapin_ram(0, total_lowmem);
>> - __mapin_ram_chunk(s, total_lowmem);
>> - } else {
>> - top = wii_hole_start;
>> - s = mmu_mapin_ram(0, top);
>> - __mapin_ram_chunk(s, top);
>> + struct memblock_region *reg;
>> +
>> + for_each_memblock(memory, reg) {
>> + unsigned long base = reg->base;
>> + unsigned long top = min(base + reg->size, (unsigned long)total_lowmem);
>
> This gives me:
>
> In file included from ../arch/powerpc/mm/pgtable_32.c:22:
> ../arch/powerpc/mm/pgtable_32.c: In function ‘mapin_ram’:
> ../include/linux/kernel.h:846:29: error: comparison of distinct pointer types lacks a cast [-Werror]
> (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
> ^~
> ../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’
> (__typecheck(x, y) && __no_side_effects(x, y))
> ^~~~~~~~~~~
> ../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’
> __builtin_choose_expr(__safe_cmp(x, y), \
> ^~~~~~~~~~
> ../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’
> #define min(x, y) __careful_cmp(x, y, <)
> ^~~~~~~~~~~~~
> ../arch/powerpc/mm/pgtable_32.c:261:23: note: in expansion of macro ‘min’
> unsigned long top = min(base + reg->size, (unsigned long)total_lowmem);
> ^~~
> cc1: all warnings being treated as errors
> ../scripts/Makefile.build:276: recipe for target 'arch/powerpc/mm/pgtable_32.o' failed
>
>
> For 44x/bamboo_defconfig.
>
The patch below should make it. Tested it on half a dozen of config.
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 2bf9bf8867d4..c4b0eb51f6d8 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -257,8 +257,8 @@ void __init mapin_ram(void)
struct memblock_region *reg;
for_each_memblock(memory, reg) {
- unsigned long base = reg->base;
- unsigned long top = min(base + reg->size, (unsigned long)total_lowmem);
+ phys_addr_t base = reg->base;
+ phys_addr_t top = min(base + reg->size, total_lowmem);
if (base >= top)
continue;
I'll send out v5, hope it'll be the last one :(
Christophe
next prev parent reply other threads:[~2019-02-21 19:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-21 8:04 [PATCH v4 00/16] powerpc/32: Use BATs/LTLBs for STRICT_KERNEL_RWX Christophe Leroy
2019-02-21 8:04 ` [PATCH v4 01/16] powerpc/wii: properly disable use of BATs when requested Christophe Leroy
2019-02-21 8:04 ` [PATCH v4 02/16] powerpc/mm/32: add base address to mmu_mapin_ram() Christophe Leroy
2019-02-21 8:04 ` [PATCH v4 03/16] powerpc/mm/32s: rework mmu_mapin_ram() Christophe Leroy
2019-02-21 8:04 ` [PATCH v4 04/16] powerpc/mm/32s: use generic mmu_mapin_ram() for all blocks Christophe Leroy
2019-02-21 13:51 ` Michael Ellerman
2019-02-21 14:38 ` Christophe Leroy
2019-02-21 19:02 ` Christophe Leroy [this message]
2019-02-21 8:04 ` [PATCH v4 05/16] powerpc/32: always populate page tables for Abatron BDI Christophe Leroy
2019-02-21 8:04 ` [PATCH v4 06/16] powerpc/wii: remove wii_mmu_mapin_mem2() Christophe Leroy
2019-02-21 8:04 ` [PATCH v4 07/16] powerpc/mm/32s: use _PAGE_EXEC in setbat() Christophe Leroy
2019-02-21 8:04 ` [PATCH v4 08/16] powerpc/32: add helper to write into segment registers Christophe Leroy
2019-02-21 8:04 ` [PATCH v4 09/16] powerpc/mmu: add is_strict_kernel_rwx() helper Christophe Leroy
2019-02-21 8:04 ` [PATCH v4 10/16] powerpc/kconfig: define PAGE_SHIFT inside Kconfig Christophe Leroy
2019-02-21 8:04 ` [PATCH v4 11/16] powerpc/kconfig: define CONFIG_DATA_SHIFT and CONFIG_ETEXT_SHIFT Christophe Leroy
2019-02-21 8:05 ` [PATCH v4 12/16] powerpc/mm/32s: add setibat() clearibat() and update_bats() Christophe Leroy
2019-02-21 8:05 ` [PATCH v4 13/16] powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX Christophe Leroy
2019-02-21 8:05 ` [PATCH v4 14/16] powerpc/kconfig: make _etext and data areas alignment configurable on Book3s 32 Christophe Leroy
2019-02-21 8:05 ` [PATCH v4 15/16] powerpc/8xx: don't disable large TLBs with CONFIG_STRICT_KERNEL_RWX Christophe Leroy
2019-02-21 8:05 ` [PATCH v4 16/16] powerpc/kconfig: make _etext and data areas alignment configurable on 8xx Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=719e3340-dd91-9504-d39c-4257e1bf0282@c-s.fr \
--to=christophe.leroy@c-s.fr \
--cc=benh@kernel.crashing.org \
--cc=j.neuschaefer@gmx.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®