From: "Baxter, Jim" <jim_baxter@mentor.com>
To: David Miller <davem@davemloft.net>
Cc: <linux-usb@vger.kernel.org>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <oliver@neukum.org>,
<bjorn@mork.no>, <David.Laight@ACULAB.COM>
Subject: Re: [PATCH V2 1/1] net: cdc_ncm: Reduce memory use when kernel memory low
Date: Fri, 30 Jun 2017 18:03:26 +0100 [thread overview]
Message-ID: <71a89e5d-e060-4735-32f7-d8bcc26aaeb2@mentor.com> (raw)
In-Reply-To: <20170630.125953.245673296877756318.davem@davemloft.net>
--------------------------------------------------------------------------------
From: David S. Miller (davem@davemloft.net)
Sent: Fri, 30 Jun 2017 12:59:53 -0400
To: jim_baxter@mentor.com
Cc: linux-usb@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, oliver@neukum.org, bjorn@mork.no, David.Laight@ACULAB.COM
Subject: Re: [PATCH V2 1/1] net: cdc_ncm: Reduce memory use when kernel memory low
> From: Jim Baxter <jim_baxter@mentor.com>
> Date: Wed, 28 Jun 2017 21:35:29 +0100
>
>> The CDC-NCM driver can require large amounts of memory to create
>> skb's and this can be a problem when the memory becomes fragmented.
>>
>> This especially affects embedded systems that have constrained
>> resources but wish to maximise the throughput of CDC-NCM with 16KiB
>> NTB's.
>>
>> The issue is after running for a while the kernel memory can become
>> fragmented and it needs compacting.
>> If the NTB allocation is needed before the memory has been compacted
>> the atomic allocation can fail which can cause increased latency,
>> large re-transmissions or disconnections depending upon the data
>> being transmitted at the time.
>> This situation occurs for less than a second until the kernel has
>> compacted the memory but the failed devices can take a lot longer to
>> recover from the failed TX packets.
>>
>> To ease this temporary situation I modified the CDC-NCM TX path to
>> temporarily switch into a reduced memory mode which allocates an NTB
>> that will fit into a USB_CDC_NCM_NTB_MIN_OUT_SIZE (default 2048 Bytes)
>> sized memory block and only transmit NTB's with a single network frame
>> until the memory situation is resolved.
>> Each time this issue occurs we wait for an increasing number of
>> reduced size allocations before requesting a full size one to not
>> put additional pressure on a low memory system.
>>
>> Once the memory is compacted the CDC-NCM data can resume transmitting
>> at the normal tx_max rate once again.
>>
>> Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
>
> If someone could review this patch, I remember this issue being discussed
> a while ago, I would really appreciate it.
>
Hello,
For reference this replaces the original discussion in
http://patchwork.ozlabs.org/patch/763100/ and
http://patchwork.ozlabs.org/patch/766181/
Best regards,
Jim
next prev parent reply other threads:[~2017-06-30 17:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-28 20:35 [PATCH V2 0/1] Reduce cdc_ncm " Jim Baxter
2017-06-28 20:35 ` [PATCH V2 1/1] net: cdc_ncm: Reduce " Jim Baxter
2017-06-30 16:59 ` David Miller
2017-06-30 17:03 ` Baxter, Jim [this message]
2017-06-30 17:38 ` Bjørn Mork
2017-06-30 17:53 ` Baxter, Jim
2017-06-30 18:03 ` Bjørn Mork
2017-07-03 8:51 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=71a89e5d-e060-4735-32f7-d8bcc26aaeb2@mentor.com \
--to=jim_baxter@mentor.com \
--cc=David.Laight@ACULAB.COM \
--cc=bjorn@mork.no \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=oliver@neukum.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome