From: Nicolas Dufresne <nicolas.dufresne@collabora.com>
To: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Cc: kernel@collabora.com, linux-kernel@vger.kernel.org,
linux-media <linux-media@vger.kernel.org>
Subject: Re: [PATCH v3 00/24] H.264 Field Decoding Support for Frame-based Decoders
Date: Wed, 06 Apr 2022 13:58:11 -0400 [thread overview]
Message-ID: <71c796610c3c9e1c8a117045c3764e40681a680a.camel@collabora.com> (raw)
In-Reply-To: <20220405204426.259074-1-nicolas.dufresne@collabora.com>
Hello everyone,
its not clear if that cover made it this time, though it will now. Adding a
comment below ...
Le mardi 05 avril 2022 à 16:44 -0400, Nicolas Dufresne a écrit :
> Until now, only Cedrus (a slice base decoder) supported interlaced
> decoding. In order to support field decoding in our frame-based decoder,
> the v4l2-h264 library needed adaptation to produce the appropriate
> reference lists.
>
> This patch extends the v4l2-h264 library to produce the larger references
> list needed to represent fields separately. Hantro, MTK-VCODEC and RKVDEC
> drivers have been adapted to accommodate the larger lists. Though, only
> Hantro and RKVDEC actually have HW support for field decoding. So only
> these two have been updated to make use of the larger lists. All this work
> has been done using the H.264 specification, LibreELEC downstream kernel
> patches, Rockchip MPP reference software and Hantro reference software.
>
> For reviewers, the following is the map of all commit. Patches that could
> be merge independently of this serie are marked as independent. Note that
> the test results do depend on the generic fixes.
>
> 01 : Documentation fix (independent)
> 02-03 : Improving some generic traces (independent)
> 04 : Minor v4l2-h264 fix (independent)
> 05-11 : v4l2-h264 field decoding support
> 12-16 : rkvdec h.264 generic fixes (independent)
> 17-20 : rkvdec h.264 field decoding support
> 21-24 : hantro h.264 field decoding support
>
> All this work have been tested using GStreamer mainline implementation
> but also with FFMPEG LibreELEC fork using the testing tool fluster
> running through the ITU-T H.264 (2016-02) AVCv2 set of bitstream. Before
> this patch, the scores were:
>
> Hantro:
> FFMPEG: 88/135
> GSteamer: 90/135
> RKVDEC:
> FFMPEG: 73/135
> GSteamer: 77/135
>
> And after these changes:
>
> Hantro:
> FFMPEG: 118/135
> GSteamer: 129/135
I have also tested on IMX8MQ now, same results. This exercise the
hantro_g1_h264.c code.
> RKVDEC:
> FFMPEG: 118/135
> GSteamer: 129/135
>
> Note that a bug in FFMPEG / LibreELEC fork was noticed and fixed with the
> following change:
>
> diff --git a/libavcodec/v4l2_request_h264.c b/libavcodec/v4l2_request_h264.c
> index 88da8f0a2d..394bae0550 100644
> --- a/libavcodec/v4l2_request_h264.c
> +++ b/libavcodec/v4l2_request_h264.c
> @@ -66,7 +66,7 @@ static void fill_dpb_entry(struct v4l2_h264_dpb_entry *entry, const H264Picture
> {
> entry->reference_ts = ff_v4l2_request_get_capture_timestamp(pic->f);
> entry->pic_num = pic->pic_id;
> - entry->frame_num = pic->frame_num;
> + entry->frame_num = pic->long_ref ? pic->pic_id : pic->frame_num;
> entry->fields = pic->reference & V4L2_H264_FRAME_REF;
> entry->flags = V4L2_H264_DPB_ENTRY_FLAG_VALID;
> if (entry->fields)
>
> Some useful links:
>
> Detailed Hantro Results: https://gitlab.freedesktop.org/-/snippets/5189
> Detailed RKVDEC Results: https://gitlab.freedesktop.org/-/snippets/5253
> ITU-T H.264 (2016-02) AVCv2: https://www.itu.int/net/itu-t/sigdb/spevideo/VideoForm-s.aspx?val=102002641
> Fluster: https://github.com/fluendo/fluster
> GStreamer: https://gitlab.freedesktop.org/gstreamer/gstreamer/
> FFMPEG Fork: https://github.com/jernejsk/FFmpeg/tree/v4l2-request-hwaccel-4.4
> Rockchip MPP: https://github.com/rockchip-linux/mpp
>
> Changes in v3:
> - Improved debug message on timestamp miss-match
> - Moved H264 SPS validation into rkvdec-h264
> - Added more comments around H264 SPS validation
> - Also validate at streamon (rkvdec start())
> - Applied more Review-by and Fixes tag
> - Fixed Signed-off-by chain in Jonas patch
>
> Changes in v2:
> - Applied most of Sebastian's suggestion in comments and commit messages.
> - Use a bool for dpb_valid and dpb_bottom in rkvdec
> - Dropped one wrong typo fix (media: v4l2-mem2mem: Fix typo in trace message)
> - Dropped Alex fix (media: rkvdec-h264: Don't hardcode SPS/PPS parameters
> + I will carry this one later, it seems cosmetic
>
> Jonas Karlman (5):
> media: rkvdec: h264: Fix bit depth wrap in pps packet
> media: rkvdec: h264: Validate and use pic width and height in mbs
> media: rkvdec: h264: Fix reference frame_num wrap for second field
> media: rkvdec: Ensure decoded resolution fit coded resolution
> media: hantro: h264: Make dpb entry management more robust
>
> Nicolas Dufresne (18):
> media: doc: Document dual use of H.264 pic_num/frame_num
> media: v4l2-mem2mem: Trace on implicit un-hold
> media: h264: Avoid wrapping long_term_frame_idx
> media: h264: Use v4l2_h264_reference for reflist
> media: h264: Increase reference lists size to 32
> media: h264: Store current picture fields
> media: h264: Store all fields into the unordered list
> media: v4l2: Trace calculated p/b0/b1 initial reflist
> media: h264: Sort p/b reflist using frame_num
> media: v4l2: Reorder field reflist
> media: rkvdec: Stop overclocking the decoder
> media: rkvdec: h264: Fix dpb_valid implementation
> media: rkvdec: Move H264 SPS validation in rkvdec-h264
> media: rkvdec-h264: Add field decoding support
> media: rkvdec: Enable capture buffer holding for H264
> media: hantro: Stop using H.264 parameter pic_num
> media: hantro: Add H.264 field decoding support
> media: hantro: Enable HOLD_CAPTURE_BUF for H.264
>
> Sebastian Fricke (1):
> media: videobuf2-v4l2: Warn on holding buffers without support
>
> .../media/v4l/ext-ctrls-codec-stateless.rst | 10 +-
> .../media/common/videobuf2/videobuf2-v4l2.c | 7 +-
> .../mediatek/vcodec/vdec/vdec_h264_req_if.c | 17 +-
> drivers/media/v4l2-core/v4l2-h264.c | 261 ++++++++++++++----
> drivers/media/v4l2-core/v4l2-mem2mem.c | 1 +
> .../staging/media/hantro/hantro_g1_h264_dec.c | 38 +--
> drivers/staging/media/hantro/hantro_h264.c | 119 ++++++--
> drivers/staging/media/hantro/hantro_hw.h | 7 +-
> drivers/staging/media/hantro/hantro_v4l2.c | 25 ++
> .../media/hantro/rockchip_vpu2_hw_h264_dec.c | 98 +++----
> drivers/staging/media/rkvdec/rkvdec-h264.c | 154 ++++++++---
> drivers/staging/media/rkvdec/rkvdec.c | 35 +--
> drivers/staging/media/rkvdec/rkvdec.h | 2 +
> include/media/v4l2-h264.h | 31 ++-
> 14 files changed, 580 insertions(+), 225 deletions(-)
>
> --
> 2.34.1
>
>
prev parent reply other threads:[~2022-04-06 19:42 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-05 20:44 Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 01/24] media: doc: Document dual use of H.264 pic_num/frame_num Nicolas Dufresne
2022-04-22 6:31 ` Hans Verkuil
2022-04-05 20:44 ` [PATCH v3 02/24] media: v4l2-mem2mem: Trace on implicit un-hold Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 03/24] media: videobuf2-v4l2: Warn on holding buffers without support Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 04/24] media: h264: Avoid wrapping long_term_frame_idx Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 05/24] media: h264: Use v4l2_h264_reference for reflist Nicolas Dufresne
2022-04-22 5:42 ` Hans Verkuil
2022-04-22 15:23 ` Nicolas Dufresne
2022-04-22 6:59 ` Hans Verkuil
2022-04-22 14:44 ` Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 06/24] media: h264: Increase reference lists size to 32 Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 07/24] media: h264: Store current picture fields Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 08/24] media: h264: Store all fields into the unordered list Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 09/24] media: v4l2: Trace calculated p/b0/b1 initial reflist Nicolas Dufresne
2022-04-22 7:26 ` Hans Verkuil
2022-04-22 14:58 ` Nicolas Dufresne
2022-04-22 16:33 ` Hans Verkuil
2022-04-05 20:44 ` [PATCH v3 10/24] media: h264: Sort p/b reflist using frame_num Nicolas Dufresne
2022-04-22 7:29 ` Hans Verkuil
2022-04-05 20:44 ` [PATCH v3 11/24] media: v4l2: Reorder field reflist Nicolas Dufresne
2022-04-22 7:31 ` Hans Verkuil
2022-04-05 20:44 ` [PATCH v3 12/24] media: rkvdec: Stop overclocking the decoder Nicolas Dufresne
2022-04-22 7:33 ` Hans Verkuil
2022-04-05 20:44 ` [PATCH v3 13/24] media: rkvdec: h264: Fix dpb_valid implementation Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 14/24] media: rkvdec: h264: Fix bit depth wrap in pps packet Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 15/24] media: rkvdec: Move H264 SPS validation in rkvdec-h264 Nicolas Dufresne
2022-04-06 5:17 ` Ezequiel Garcia
2022-04-22 7:36 ` Hans Verkuil
2022-04-05 20:44 ` [PATCH v3 16/24] media: rkvdec: h264: Validate and use pic width and height in mbs Nicolas Dufresne
2022-04-06 13:10 ` Nicolas Dufresne
2022-04-06 13:12 ` Ezequiel Garcia
2022-04-22 7:39 ` Hans Verkuil
2022-04-05 20:44 ` [PATCH v3 17/24] media: rkvdec: h264: Fix reference frame_num wrap for second field Nicolas Dufresne
2022-04-22 7:43 ` Hans Verkuil
2022-04-25 18:55 ` Nicolas Dufresne
2022-04-25 19:00 ` Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 18/24] media: rkvdec: Ensure decoded resolution fit coded resolution Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 19/24] media: rkvdec-h264: Add field decoding support Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 20/24] media: rkvdec: Enable capture buffer holding for H264 Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 21/24] media: hantro: Stop using H.264 parameter pic_num Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 22/24] media: hantro: h264: Make dpb entry management more robust Nicolas Dufresne
2022-04-05 20:44 ` [PATCH v3 23/24] media: hantro: Add H.264 field decoding support Nicolas Dufresne
2022-04-22 7:49 ` Hans Verkuil
2022-04-05 20:44 ` [PATCH v3 24/24] media: hantro: Enable HOLD_CAPTURE_BUF for H.264 Nicolas Dufresne
2022-04-06 17:58 ` Nicolas Dufresne [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=71c796610c3c9e1c8a117045c3764e40681a680a.camel@collabora.com \
--to=nicolas.dufresne@collabora.com \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®