From: Murali Karicheri <m-karicheri2@ti.com>
To: Grygorii Strashko <grygorii.strashko@ti.com>,
<netdev@vger.kernel.org>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
"David S . Miller" <davem@davemloft.net>,
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>, Sekhar Nori <nsekhar@ti.com>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>
Subject: Re: [PATCH net-next 16/19] net: ethernet: ti: cpsw: move common hw init code in separate func
Date: Thu, 25 Apr 2019 09:38:10 -0400 [thread overview]
Message-ID: <71d13a87-a078-a49d-43b2-33beb19f0e46@ti.com> (raw)
In-Reply-To: <1556024950-20752-17-git-send-email-grygorii.strashko@ti.com>
On 04/23/2019 09:09 AM, Grygorii Strashko wrote:
> move common hw init code in separate function as preparation for adding new
> switchdev driver.
All of the changes indicates a better name for the file is
cpsw_common.c; commit log, new function cpsw_init_common() etc. Any
specific reason to use cpsw_priv.[ch]?
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
> drivers/net/ethernet/ti/Makefile | 2 +-
> drivers/net/ethernet/ti/cpsw.c | 106 ++---------------------
> drivers/net/ethernet/ti/cpsw_priv.c | 128 ++++++++++++++++++++++++++++
> drivers/net/ethernet/ti/cpsw_priv.h | 3 +
> 4 files changed, 137 insertions(+), 102 deletions(-)
> create mode 100644 drivers/net/ethernet/ti/cpsw_priv.c
>
> diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
> index 2f159a71f88e..de1561596646 100644
> --- a/drivers/net/ethernet/ti/Makefile
> +++ b/drivers/net/ethernet/ti/Makefile
> @@ -14,7 +14,7 @@ obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
> obj-$(CONFIG_TI_CPSW_PHY_SEL) += cpsw-phy-sel.o
> obj-$(CONFIG_TI_CPTS_MOD) += cpts.o
> obj-$(CONFIG_TI_CPSW) += ti_cpsw.o
> -ti_cpsw-y := cpsw.o davinci_cpdma.o cpsw_ale.o
> +ti_cpsw-y := cpsw.o davinci_cpdma.o cpsw_ale.o cpsw_priv.o
>
> obj-$(CONFIG_TI_KEYSTONE_NETCP) += keystone_netcp.o
> keystone_netcp-y := netcp_core.o cpsw_ale.o
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 7dffc67f0cf4..a6c3d8be1649 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -3007,16 +3007,12 @@ static int cpsw_probe(struct platform_device *pdev)
> struct cpsw_platform_data *data;
> struct net_device *ndev;
> struct cpsw_priv *priv;
> - struct cpdma_params dma_params;
> - struct cpsw_ale_params ale_params;
> void __iomem *ss_regs;
> - void __iomem *cpts_regs;
> struct resource *res, *ss_res;
> struct gpio_descs *mode;
> - u32 slave_offset, sliver_offset, slave_size;
> const struct soc_device_attribute *soc;
> struct cpsw_common *cpsw;
> - int ret = 0, i, ch;
> + int ret = 0, ch;
> int irq;
>
> cpsw = devm_kzalloc(dev, sizeof(struct cpsw_common), GFP_KERNEL);
> @@ -3096,103 +3092,12 @@ static int cpsw_probe(struct platform_device *pdev)
>
> cpsw->rx_packet_max = max(rx_packet_max, CPSW_MAX_PACKET_SIZE);
>
> - cpsw->rx_ch_num = 1;
> - cpsw->tx_ch_num = 1;
>
> - cpsw->version = readl(&cpsw->regs->id_ver);
> -
> - memset(&dma_params, 0, sizeof(dma_params));
> - memset(&ale_params, 0, sizeof(ale_params));
> -
> - switch (cpsw->version) {
> - case CPSW_VERSION_1:
> - cpsw->host_port_regs = ss_regs + CPSW1_HOST_PORT_OFFSET;
> - cpts_regs = ss_regs + CPSW1_CPTS_OFFSET;
> - cpsw->hw_stats = ss_regs + CPSW1_HW_STATS;
> - dma_params.dmaregs = ss_regs + CPSW1_CPDMA_OFFSET;
> - dma_params.txhdp = ss_regs + CPSW1_STATERAM_OFFSET;
> - ale_params.ale_regs = ss_regs + CPSW1_ALE_OFFSET;
> - slave_offset = CPSW1_SLAVE_OFFSET;
> - slave_size = CPSW1_SLAVE_SIZE;
> - sliver_offset = CPSW1_SLIVER_OFFSET;
> - dma_params.desc_mem_phys = 0;
> - break;
> - case CPSW_VERSION_2:
> - case CPSW_VERSION_3:
> - case CPSW_VERSION_4:
> - cpsw->host_port_regs = ss_regs + CPSW2_HOST_PORT_OFFSET;
> - cpts_regs = ss_regs + CPSW2_CPTS_OFFSET;
> - cpsw->hw_stats = ss_regs + CPSW2_HW_STATS;
> - dma_params.dmaregs = ss_regs + CPSW2_CPDMA_OFFSET;
> - dma_params.txhdp = ss_regs + CPSW2_STATERAM_OFFSET;
> - ale_params.ale_regs = ss_regs + CPSW2_ALE_OFFSET;
> - slave_offset = CPSW2_SLAVE_OFFSET;
> - slave_size = CPSW2_SLAVE_SIZE;
> - sliver_offset = CPSW2_SLIVER_OFFSET;
> - dma_params.desc_mem_phys =
> - (u32 __force) ss_res->start + CPSW2_BD_OFFSET;
> - break;
> - default:
> - dev_err(dev, "unknown version 0x%08x\n", cpsw->version);
> - ret = -ENODEV;
> - goto clean_dt_ret;
> - }
> -
> - for (i = 0; i < cpsw->data.slaves; i++) {
> - struct cpsw_slave *slave = &cpsw->slaves[i];
> - void __iomem *regs = cpsw->regs;
> -
> - slave->slave_num = i;
> - slave->data = &cpsw->data.slave_data[i];
> - slave->regs = regs + slave_offset;
> - slave->sliver = regs + sliver_offset;
> - slave->port_vlan = slave->data->dual_emac_res_vlan;
> -
> - slave_offset += slave_size;
> - sliver_offset += SLIVER_SIZE;
> - }
> -
> - ale_params.dev = dev;
> - ale_params.ale_ageout = ale_ageout;
> - ale_params.ale_entries = data->ale_entries;
> - ale_params.ale_ports = CPSW_ALE_PORTS_NUM;
> -
> - cpsw->ale = cpsw_ale_create(&ale_params);
> - if (!cpsw->ale) {
> - dev_err(dev, "error initializing ale engine\n");
> - ret = -ENODEV;
> - goto clean_dt_ret;
> - }
> -
> - dma_params.dev = dev;
> - dma_params.rxthresh = dma_params.dmaregs + CPDMA_RXTHRESH;
> - dma_params.rxfree = dma_params.dmaregs + CPDMA_RXFREE;
> - dma_params.rxhdp = dma_params.txhdp + CPDMA_RXHDP;
> - dma_params.txcp = dma_params.txhdp + CPDMA_TXCP;
> - dma_params.rxcp = dma_params.txhdp + CPDMA_RXCP;
> -
> - dma_params.num_chan = data->channels;
> - dma_params.has_soft_reset = true;
> - dma_params.min_packet_size = CPSW_MIN_PACKET_SIZE;
> - dma_params.desc_mem_size = data->bd_ram_size;
> - dma_params.desc_align = 16;
> - dma_params.has_ext_regs = true;
> - dma_params.desc_hw_addr = dma_params.desc_mem_phys;
> - dma_params.bus_freq_mhz = cpsw->bus_freq_mhz;
> - dma_params.descs_pool_size = descs_pool_size;
> -
> - cpsw->dma = cpdma_ctlr_create(&dma_params);
> - if (!cpsw->dma) {
> - dev_err(dev, "error initializing dma\n");
> - ret = -ENOMEM;
> + ret = cpsw_init_common(cpsw, ss_regs, ale_ageout,
> + (u32 __force)ss_res->start + CPSW2_BD_OFFSET,
> + descs_pool_size);
> + if (ret)
> goto clean_dt_ret;
> - }
> -
> - cpsw->cpts = cpts_create(cpsw->dev, cpts_regs, cpsw->dev->of_node);
> - if (IS_ERR(cpsw->cpts)) {
> - ret = PTR_ERR(cpsw->cpts);
> - goto clean_dma_ret;
> - }
>
> ch = cpsw->quirk_irq ? 0 : 7;
> cpsw->txv[0].ch = cpdma_chan_create(cpsw->dma, ch, cpsw_tx_handler, 0);
> @@ -3300,7 +3205,6 @@ static int cpsw_probe(struct platform_device *pdev)
> unregister_netdev(ndev);
> clean_cpts:
> cpts_release(cpsw->cpts);
> -clean_dma_ret:
> cpdma_ctlr_destroy(cpsw->dma);
> clean_dt_ret:
> cpsw_remove_dt(pdev);
> diff --git a/drivers/net/ethernet/ti/cpsw_priv.c b/drivers/net/ethernet/ti/cpsw_priv.c
> new file mode 100644
> index 000000000000..208c544d0b80
> --- /dev/null
> +++ b/drivers/net/ethernet/ti/cpsw_priv.c
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Texas Instruments Ethernet Switch Driver
> + *
> + * Copyright (C) 2019 Texas Instruments
> + */
> +
> +#include <linux/if_ether.h>
> +#include <linux/if_vlan.h>
> +#include <linux/module.h>
> +#include <linux/netdevice.h>
> +#include <linux/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/skbuff.h>
> +
> +#include "cpts.h"
> +#include "cpsw_ale.h"
> +#include "cpsw_priv.h"
> +#include "davinci_cpdma.h"
> +
> +int cpsw_init_common(struct cpsw_common *cpsw, void __iomem *ss_regs,
> + int ale_ageout, u32 desc_mem_phys, int descs_pool_size)
> +{
> + u32 slave_offset, sliver_offset, slave_size;
> + struct cpsw_ale_params ale_params;
> + struct cpsw_platform_data *data;
> + struct cpdma_params dma_params;
> + struct device *dev = cpsw->dev;
> + void __iomem *cpts_regs;
> + int ret = 0, i;
> +
> + data = &cpsw->data;
> + cpsw->rx_ch_num = 1;
> + cpsw->tx_ch_num = 1;
> +
> + cpsw->version = readl(&cpsw->regs->id_ver);
> +
> + memset(&dma_params, 0, sizeof(dma_params));
> + memset(&ale_params, 0, sizeof(ale_params));
> +
> + switch (cpsw->version) {
> + case CPSW_VERSION_1:
> + cpsw->host_port_regs = ss_regs + CPSW1_HOST_PORT_OFFSET;
> + cpts_regs = ss_regs + CPSW1_CPTS_OFFSET;
> + cpsw->hw_stats = ss_regs + CPSW1_HW_STATS;
> + dma_params.dmaregs = ss_regs + CPSW1_CPDMA_OFFSET;
> + dma_params.txhdp = ss_regs + CPSW1_STATERAM_OFFSET;
> + ale_params.ale_regs = ss_regs + CPSW1_ALE_OFFSET;
> + slave_offset = CPSW1_SLAVE_OFFSET;
> + slave_size = CPSW1_SLAVE_SIZE;
> + sliver_offset = CPSW1_SLIVER_OFFSET;
> + dma_params.desc_mem_phys = 0;
> + break;
> + case CPSW_VERSION_2:
> + case CPSW_VERSION_3:
> + case CPSW_VERSION_4:
> + cpsw->host_port_regs = ss_regs + CPSW2_HOST_PORT_OFFSET;
> + cpts_regs = ss_regs + CPSW2_CPTS_OFFSET;
> + cpsw->hw_stats = ss_regs + CPSW2_HW_STATS;
> + dma_params.dmaregs = ss_regs + CPSW2_CPDMA_OFFSET;
> + dma_params.txhdp = ss_regs + CPSW2_STATERAM_OFFSET;
> + ale_params.ale_regs = ss_regs + CPSW2_ALE_OFFSET;
> + slave_offset = CPSW2_SLAVE_OFFSET;
> + slave_size = CPSW2_SLAVE_SIZE;
> + sliver_offset = CPSW2_SLIVER_OFFSET;
> + dma_params.desc_mem_phys = desc_mem_phys;
> + break;
> + default:
> + dev_err(dev, "unknown version 0x%08x\n", cpsw->version);
> + return -ENODEV;
> + }
> +
> + for (i = 0; i < cpsw->data.slaves; i++) {
> + struct cpsw_slave *slave = &cpsw->slaves[i];
> + void __iomem *regs = cpsw->regs;
> +
> + slave->slave_num = i;
> + slave->data = &cpsw->data.slave_data[i];
> + slave->regs = regs + slave_offset;
> + slave->sliver = regs + sliver_offset;
> + slave->port_vlan = slave->data->dual_emac_res_vlan;
> +
> + slave_offset += slave_size;
> + sliver_offset += SLIVER_SIZE;
> + }
> +
> + ale_params.dev = dev;
> + ale_params.ale_ageout = ale_ageout;
> + ale_params.ale_entries = data->ale_entries;
> + ale_params.ale_ports = CPSW_ALE_PORTS_NUM;
> +
> + cpsw->ale = cpsw_ale_create(&ale_params);
> + if (!cpsw->ale) {
> + dev_err(dev, "error initializing ale engine\n");
> + return -ENODEV;
> + }
> +
> + dma_params.dev = dev;
> + dma_params.rxthresh = dma_params.dmaregs + CPDMA_RXTHRESH;
> + dma_params.rxfree = dma_params.dmaregs + CPDMA_RXFREE;
> + dma_params.rxhdp = dma_params.txhdp + CPDMA_RXHDP;
> + dma_params.txcp = dma_params.txhdp + CPDMA_TXCP;
> + dma_params.rxcp = dma_params.txhdp + CPDMA_RXCP;
> +
> + dma_params.num_chan = data->channels;
> + dma_params.has_soft_reset = true;
> + dma_params.min_packet_size = CPSW_MIN_PACKET_SIZE;
> + dma_params.desc_mem_size = data->bd_ram_size;
> + dma_params.desc_align = 16;
> + dma_params.has_ext_regs = true;
> + dma_params.desc_hw_addr = dma_params.desc_mem_phys;
> + dma_params.bus_freq_mhz = cpsw->bus_freq_mhz;
> + dma_params.descs_pool_size = descs_pool_size;
> +
> + cpsw->dma = cpdma_ctlr_create(&dma_params);
> + if (!cpsw->dma) {
> + dev_err(dev, "error initializing dma\n");
> + return -ENOMEM;
> + }
> +
> + cpsw->cpts = cpts_create(cpsw->dev, cpts_regs, cpsw->dev->of_node);
> + if (IS_ERR(cpsw->cpts)) {
> + ret = PTR_ERR(cpsw->cpts);
> + cpdma_ctlr_destroy(cpsw->dma);
> + }
> +
> + return ret;
> +}
> diff --git a/drivers/net/ethernet/ti/cpsw_priv.h b/drivers/net/ethernet/ti/cpsw_priv.h
> index 8df9ce68696a..4004140fc4d0 100644
> --- a/drivers/net/ethernet/ti/cpsw_priv.h
> +++ b/drivers/net/ethernet/ti/cpsw_priv.h
> @@ -447,4 +447,7 @@ struct addr_sync_ctx {
> int flush; /* flush flag */
> };
>
> +int cpsw_init_common(struct cpsw_common *cpsw, void __iomem *ss_regs,
> + int ale_ageout, u32 desc_mem_phys, int descs_pool_size);
> +
> #endif /* DRIVERS_NET_ETHERNET_TI_CPSW_PRIV_H_ */
>
next prev parent reply other threads:[~2019-04-25 13:34 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-23 13:08 [PATCH net-next 00/19] net: ethernet: ti: clean up and optimizations Grygorii Strashko
2019-04-23 13:08 ` [PATCH net-next 01/19] net: ethernet: ti: convert to SPDX license identifiers Grygorii Strashko
2019-04-23 13:58 ` Andrew Lunn
2019-04-24 9:31 ` Grygorii Strashko
2019-04-23 13:08 ` [PATCH net-next 02/19] net: ethernet: ti: cpsw: drop TI_DAVINCI_CPDMA config option Grygorii Strashko
2019-04-24 0:27 ` Jakub Kicinski
2019-04-24 9:31 ` Grygorii Strashko
2019-04-25 13:44 ` Murali Karicheri
2019-04-23 13:08 ` [PATCH net-next 03/19] net: ethernet: ti: cpsw: drop CONFIG_TI_CPSW_ALE " Grygorii Strashko
2019-04-23 18:37 ` Andrew Lunn
2019-04-23 13:08 ` [PATCH net-next 04/19] net: ethernet: ti: cpsw: update cpsw_split_res() to accept cpsw_common Grygorii Strashko
2019-04-23 13:08 ` [PATCH net-next 05/19] net: ethernet: ti: cpsw: use local var dev in probe Grygorii Strashko
2019-04-23 18:40 ` Andrew Lunn
2019-04-24 9:20 ` Grygorii Strashko
2019-04-23 13:08 ` [PATCH net-next 06/19] net: ethernet: ti: cpsw: drop pinctrl_pm_select_default_state call Grygorii Strashko
2019-04-23 18:40 ` Andrew Lunn
2019-04-23 13:08 ` [PATCH net-next 07/19] net: ethernet: ti: cpsw: use devm_alloc_etherdev_mqs() Grygorii Strashko
2019-04-23 18:41 ` Andrew Lunn
2019-04-23 13:08 ` [PATCH net-next 08/19] net: ethernet: ti: cpsw: drop cpsw_tx_packet_submit() Grygorii Strashko
2019-04-23 18:42 ` Andrew Lunn
2019-04-23 13:09 ` [PATCH net-next 09/19] net: ethernet: ti: ale: fix mcast super setting Grygorii Strashko
2019-04-23 13:09 ` [PATCH net-next 10/19] net: ethernet: ti: ale: use define for host port in cpsw_ale_set_allmulti() Grygorii Strashko
2019-04-23 18:43 ` Andrew Lunn
2019-04-23 13:09 ` [PATCH net-next 11/19] net: ethernet: ti: cpsw: fix allmulti cfg in dual_mac mode Grygorii Strashko
2019-04-24 11:00 ` Ivan Khoronzhuk
2019-04-24 12:22 ` Ivan Khoronzhuk
2019-04-24 14:55 ` Grygorii Strashko
2019-04-23 13:09 ` [PATCH net-next 12/19] net: ethernet: ti: ale: do not auto delete mcast super entries Grygorii Strashko
2019-04-23 13:09 ` [PATCH net-next 13/19] net: ethernet: ti: davinci_mdio: use devm_ioremap() Grygorii Strashko
2019-04-23 13:09 ` [PATCH net-next 14/19] net: ethernet: ti: cpsw: refactor probe to group common hw initialization Grygorii Strashko
2019-04-23 13:09 ` [PATCH net-next 15/19] net: ethernet: ti: cpsw: move cpsw definitions in priv header Grygorii Strashko
2019-04-23 13:09 ` [PATCH net-next 16/19] net: ethernet: ti: cpsw: move common hw init code in separate func Grygorii Strashko
2019-04-23 18:53 ` Andrew Lunn
2019-04-25 13:38 ` Murali Karicheri [this message]
2019-04-25 14:14 ` Grygorii Strashko
2019-04-23 13:09 ` [PATCH net-next 17/19] net: ethernet: ti: cpsw: introduce mac sl module api Grygorii Strashko
2019-04-23 19:01 ` Andrew Lunn
2019-04-23 13:09 ` [PATCH net-next 18/19] net: ethernet: ti: cpsw: switch to use mac sl api Grygorii Strashko
2019-04-23 13:09 ` [PATCH net-next 19/19] net: ethernet: ti: cpsw: move ethtool func in separate file Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=71d13a87-a078-a49d-43b2-33beb19f0e46@ti.com \
--to=m-karicheri2@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=grygorii.strashko@ti.com \
--cc=ilias.apalodimas@linaro.org \
--cc=ivan.khoronzhuk@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®