Re: [PATCH 02/17] media: atomisp: pci: fix punit_ddr_dvfs_enable() argument for mrfld_power up case

[Tsuchiya Yuto <kitakar@gmail.com>]

On Mon, 2021-10-18 at 14:07 +0300, Andy Shevchenko wrote:
> On Mon, Oct 18, 2021 at 01:19:42AM +0900, Tsuchiya Yuto wrote:
> > When comparing with intel-aero atomisp [1], it looks like
> > punit_ddr_dvfs_enable() should take `false` as an argument on mrfld_power
> > up case.
> > 
> > Code from the intel-aero kernel [1]:
> > 
> >         int atomisp_mrfld_power_down(struct atomisp_device *isp)
> >         {
> >         [...]
> >         	/*WA:Enable DVFS*/
> >         	if (IS_CHT)
> >         		punit_ddr_dvfs_enable(true);
> > 
> >         int atomisp_mrfld_power_up(struct atomisp_device *isp)
> >         {
> >         [...]
> >         	/*WA for PUNIT, if DVFS enabled, ISP timeout observed*/
> >         	if (IS_CHT)
> >         		punit_ddr_dvfs_enable(false);
> > 
> > This patch fixes the inverted argument as per the intel-aero code, as
> > well as its comment. While here, fix space issues for comments in
> > atomisp_mrfld_power().
> > 
> > Note that it does not seem to be possible to unify the up/down cases for
> > punit_ddr_dvfs_enable(), i.e., we can't do something like the following:
> > 
> >         if (IS_CHT)
> >         	punit_ddr_dvfs_enable(!enable);
> > 
> > because according to the intel-aero code [1], the DVFS is disabled
> > before "writing 0x0 to ISPSSPM0 bit[1:0]" and the DVFS is enabled after
> > "writing 0x3 to ISPSSPM0 bit[1:0]".
> > 
> > [1] https://github.com/intel-aero/linux-kernel/blob/a1b673258feb915268377275130c5c5df0eafc82/drivers/media/pci/atomisp/atomisp_driver/atomisp_v4l2.c#L431-L514
> > 
> > Fixes: 0f441fd70b1e ("media: atomisp: simplify the power down/up code")
> > Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
> > ---
> >  drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
> > index 0511c454e769..f5362554638e 100644
> > --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
> > +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
> > @@ -711,15 +711,15 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
> >  
> >  	dev_dbg(isp->dev, "IUNIT power-%s.\n", enable ? "on" : "off");
> >  
> > -	/*WA:Enable DVFS*/
> > +	/* WA for PUNIT, if DVFS enabled, ISP timeout observed */
> 
> P-Unit

Thanks, I'll fix this next time I send.

> >  	if (IS_CHT && enable)
> > -		punit_ddr_dvfs_enable(true);
> > +		punit_ddr_dvfs_enable(false);
> >  
> >  	/*
> >  	 * FIXME:WA for ECS28A, with this sleep, CTS
> >  	 * android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceAbort
> >  	 * PASS, no impact on other platforms
> > -	*/
> > +	 */
> >  	if (IS_BYT && enable)
> >  		msleep(10);
> >  
> > @@ -727,7 +727,7 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
> >  	iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, MRFLD_ISPSSPM0,
> >  			val, MRFLD_ISPSSPM0_ISPSSC_MASK);
> >  
> > -	/*WA:Enable DVFS*/
> > +	/* WA:Enable DVFS */
> >  	if (IS_CHT && !enable)
> >  		punit_ddr_dvfs_enable(true);
> >  
> > -- 
> > 2.33.1
> > 
> > 
>