mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Wang Jianchao <jianchao.wan9@gmail.com>
To: Theodore Ts'o <tytso@mit.edu>, Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org, linux-kernel@vger.kernel.org,
	lishujin@kuaishou.com
Subject: [PATCH V2 2/7] ext4: add new helper interface ext4_try_to_trim_range()
Date: Wed, 26 May 2021 16:43:13 +0800	[thread overview]
Message-ID: <72360aac-48f9-95c6-539f-739464f9fc9e@gmail.com> (raw)
In-Reply-To: <a602a6ba-2073-8384-4c8f-d669ee25c065@gmail.com>

There is no functional change in this patch but just split the
codes, which serachs free block and does trim, into a new function
ext4_try_to_trim_range. This is preparing for the following async
backgroup discard.

Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
---
 fs/ext4/mballoc.c | 102 ++++++++++++++++++++++++++++++------------------------
 1 file changed, 57 insertions(+), 45 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index d81f1fd22..f984f15 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -5685,6 +5685,54 @@ static int ext4_trim_extent(struct super_block *sb,
 	return ret;
 }
 
+static int ext4_try_to_trim_range(struct super_block *sb,
+		struct ext4_buddy *e4b, ext4_grpblk_t start,
+		ext4_grpblk_t max, ext4_grpblk_t minblocks)
+{
+	ext4_grpblk_t next, count, free_count;
+	void *bitmap;
+	int ret = 0;
+
+	bitmap = e4b->bd_bitmap;
+	start = (e4b->bd_info->bb_first_free > start) ?
+		e4b->bd_info->bb_first_free : start;
+	count = 0;
+	free_count = 0;
+
+	while (start <= max) {
+		start = mb_find_next_zero_bit(bitmap, max + 1, start);
+		if (start > max)
+			break;
+		next = mb_find_next_bit(bitmap, max + 1, start);
+
+		if ((next - start) >= minblocks) {
+			ret = ext4_trim_extent(sb, start, next - start, e4b);
+			if (ret && ret != -EOPNOTSUPP)
+				break;
+			ret = 0;
+			count += next - start;
+		}
+		free_count += next - start;
+		start = next + 1;
+
+		if (fatal_signal_pending(current)) {
+			count = -ERESTARTSYS;
+			break;
+		}
+
+		if (need_resched()) {
+			ext4_unlock_group(sb, e4b->bd_group);
+			cond_resched();
+			ext4_lock_group(sb, e4b->bd_group);
+		}
+
+		if ((e4b->bd_info->bb_free - free_count) < minblocks)
+			break;
+	}
+
+	return count;
+}
+
 /**
  * ext4_trim_all_free -- function to trim all free space in alloc. group
  * @sb:			super block for file system
@@ -5708,10 +5756,8 @@ static int ext4_trim_extent(struct super_block *sb,
 		   ext4_grpblk_t start, ext4_grpblk_t max,
 		   ext4_grpblk_t minblocks)
 {
-	void *bitmap;
-	ext4_grpblk_t next, count = 0, free_count = 0;
 	struct ext4_buddy e4b;
-	int ret = 0;
+	int ret;
 
 	trace_ext4_trim_all_free(sb, group, start, max);
 
@@ -5721,57 +5767,23 @@ static int ext4_trim_extent(struct super_block *sb,
 			     ret, group);
 		return ret;
 	}
-	bitmap = e4b.bd_bitmap;
 
 	ext4_lock_group(sb, group);
-	if (EXT4_MB_GRP_WAS_TRIMMED(e4b.bd_info) &&
-	    minblocks >= atomic_read(&EXT4_SB(sb)->s_last_trim_minblks))
-		goto out;
-
-	start = (e4b.bd_info->bb_first_free > start) ?
-		e4b.bd_info->bb_first_free : start;
 
-	while (start <= max) {
-		start = mb_find_next_zero_bit(bitmap, max + 1, start);
-		if (start > max)
-			break;
-		next = mb_find_next_bit(bitmap, max + 1, start);
-
-		if ((next - start) >= minblocks) {
-			ret = ext4_trim_extent(sb, start, next - start, &e4b);
-			if (ret && ret != -EOPNOTSUPP)
-				break;
-			ret = 0;
-			count += next - start;
-		}
-		free_count += next - start;
-		start = next + 1;
-
-		if (fatal_signal_pending(current)) {
-			count = -ERESTARTSYS;
-			break;
-		}
-
-		if (need_resched()) {
-			ext4_unlock_group(sb, group);
-			cond_resched();
-			ext4_lock_group(sb, group);
-		}
-
-		if ((e4b.bd_info->bb_free - free_count) < minblocks)
-			break;
+	if (!EXT4_MB_GRP_WAS_TRIMMED(e4b.bd_info) ||
+	    minblocks < atomic_read(&EXT4_SB(sb)->s_last_trim_minblks)) {
+		ret = ext4_try_to_trim_range(sb, &e4b, start, max, minblocks);
+		if (ret >= 0)
+			EXT4_MB_GRP_SET_TRIMMED(e4b.bd_info);
+	} else {
+		ret = 0;
 	}
 
-	if (!ret) {
-		ret = count;
-		EXT4_MB_GRP_SET_TRIMMED(e4b.bd_info);
-	}
-out:
 	ext4_unlock_group(sb, group);
 	ext4_mb_unload_buddy(&e4b);
 
 	ext4_debug("trimmed %d blocks in the group %d\n",
-		count, group);
+		ret, group);
 
 	return ret;
 }
-- 
1.8.3.1

  parent reply	other threads:[~2021-05-26  8:43 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <164ffa3b-c4d5-6967-feba-b972995a6dfb@gmail.com>
2021-05-26  8:42 ` [PATCH V2 1/7] ext4: remove the 'group' parameter of ext4_trim_extent Wang Jianchao
2021-05-27 19:47   ` Andreas Dilger
2021-06-23 13:13   ` Theodore Ts'o
2021-06-23 19:49     ` Theodore Ts'o
2021-07-02 10:27       ` Josh Triplett
2021-07-05 11:28       ` Wang Jianchao
     [not found] ` <a602a6ba-2073-8384-4c8f-d669ee25c065@gmail.com>
2021-05-26  8:43   ` Wang Jianchao [this message]
     [not found]   ` <49382052-6238-f1fb-40d1-b6b801b39ff7@gmail.com>
2021-05-26  8:43     ` [PATCH V2 3/7] ext4: remove the repeated comment of ext4_trim_all_free Wang Jianchao
     [not found]     ` <48e33dea-d15e-f211-0191-e01bd3eb17b3@gmail.com>
2021-05-26  8:43       ` [PATCH V2 4/7] ext4: add new helper interface ext4_insert_free_data Wang Jianchao
     [not found]       ` <67eeb65a-d413-c4f9-c06f-d5dcceca0e4f@gmail.com>
2021-05-26  8:43         ` [PATCH V2 5/7] ext4: get buddy cache after insert successfully Wang Jianchao
2021-06-23  3:06           ` Theodore Ts'o
     [not found]         ` <0b7915bc-193a-137b-4e52-8aaef8d6fef3@gmail.com>
2021-05-26  8:43           ` [PATCH V2 6/7] ext4: use bb_free_root to get the free data entry Wang Jianchao
2021-05-26  8:44           ` [PATCH V2 7/7] ext4: get discard out of jbd2 commit kthread contex Wang Jianchao
2021-06-22  0:55             ` Josh Triplett
2023-09-06  0:11             ` Sarthak Kukreti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=72360aac-48f9-95c6-539f-739464f9fc9e@gmail.com \
    --to=jianchao.wan9@gmail.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lishujin@kuaishou.com \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®