From: Lu Baolu <baolu.lu@linux.intel.com>
To: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: baolu.lu@linux.intel.com, Joerg Roedel <joro@8bytes.org>,
iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
stable@kernel.vger.org
Subject: Re: Question about domain_init (v5.3-v5.7)
Date: Fri, 27 Nov 2020 10:12:17 +0800 [thread overview]
Message-ID: <72a7b338-2481-8c0a-5641-6f448557f6ee@linux.intel.com> (raw)
In-Reply-To: <87a6v3hkd9.fsf@jsnitsel.users.ipa.redhat.com>
Hi Jerry,
On 11/27/20 5:35 AM, Jerry Snitselaar wrote:
>
> Lu Baolu @ 2020-11-26 04:01 MST:
>
>> Hi Jerry,
>>
>> On 2020/11/26 4:27, Jerry Snitselaar wrote:
>>> Is there a reason we check the requested guest address width against
>>> the
>>> iommu's mgaw, instead of the agaw that we already know for the iommu?
>>> I've run into a case with a new system where the mgaw reported is 57,
>>> but if they set PAE to 46 instead of 52 in the bios, then sagaw reports
>>> the highest supported agaw is 48 and the domain_init code fails here. In
>>
>> Isn't this a platform bug? If it's too late to fix it in the BIOS, you
>> maybe have to add a platform specific quirk to set mgaw to the highest
>> supported agaw?
>>
>> Best regards,
>> baolu
>
> Is there somewhere you can point me to that discusses how they should be
> setting the mgaw? I misunderstood when I previously asked you about
> whether the mgaw could be a value that was greater than any of sagaw.
> If it is a bios issue, then they should fix it there.
MGAW indicates the max gpa width supported by 2nd translation. The VT-d
spec requires that this value must be at least equal to the host
physical addressibility. According to this, BIOS is good, right?
For this failure case, domain_init() just wants to find a suitable agaw
for the private domain. I think it makes sense to check against
iommu->agaw instead of cap_mgaw.
Best regards,
baolu
>
>>
>>> other places like prepare_domain_attach_device, the dmar domain agaw
>>> gets adjusted down to the iommu agaw. The agaw of the iommu gets
>>> determined based off what is reported for sagaw. I'm wondering if it
>>> can't instead do:
>>> ---
>>> drivers/iommu/intel-iommu.c | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>> diff --git a/drivers/iommu/intel-iommu.c
>>> b/drivers/iommu/intel-iommu.c
>>> index 6ca5c92ef2e5..a8e41ec36d9e 100644
>>> --- a/drivers/iommu/intel-iommu.c
>>> +++ b/drivers/iommu/intel-iommu.c
>>> @@ -1862,8 +1862,8 @@ static int domain_init(struct dmar_domain *domain, struct intel_iommu *iommu,
>>> domain_reserve_special_ranges(domain);
>>> /* calculate AGAW */
>>> - if (guest_width > cap_mgaw(iommu->cap))
>>> - guest_width = cap_mgaw(iommu->cap);
>>> + if (guest_width > agaw_to_width(iommu->agaw))
>>> + guest_width = agaw_to_width(iommu->agaw);
>>> domain->gaw = guest_width;
>>> adjust_width = guestwidth_to_adjustwidth(guest_width);
>>> agaw = width_to_agaw(adjust_width);
>>> --
>>> 2.27.0
>>>
>>> Thoughts? With the former code the ehci device for the ilo fails when
>>> trying to get a private domain.
>>> Thanks,
>>> Jerry
>>>
>
next prev parent reply other threads:[~2020-11-27 2:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-25 20:27 Jerry Snitselaar
2020-11-26 11:01 ` Lu Baolu
2020-11-26 21:35 ` Jerry Snitselaar
2020-11-27 2:12 ` Lu Baolu [this message]
2020-11-27 7:48 ` Jerry Snitselaar
2020-11-30 17:50 ` Jerry Snitselaar
2020-11-30 18:03 ` Jerry Snitselaar
2020-12-01 2:37 ` Lu Baolu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=72a7b338-2481-8c0a-5641-6f448557f6ee@linux.intel.com \
--to=baolu.lu@linux.intel.com \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=jsnitsel@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@kernel.vger.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome