On Wed, 11 Jun 2025, Jiri Slaby (SUSE) wrote:

> 'frac' is not used in the generic implementation of get_divisor. Drop it
> from there. (Only some port->get_divisor() compute that and receive it
> then to port->set_divisor()).
> 
> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
> ---
>  drivers/tty/serial/8250/8250_port.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index 2af89038e50e..6363915a1787 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -2481,9 +2481,7 @@ static void serial8250_flush_buffer(struct uart_port *port)
>  		serial8250_tx_dma_flush(up);
>  }
>  
> -static unsigned int serial8250_do_get_divisor(struct uart_port *port,
> -					      unsigned int baud,
> -					      unsigned int *frac)
> +static unsigned int serial8250_do_get_divisor(struct uart_port *port, unsigned int baud)
>  {
>  	upf_t magic_multiplier = port->flags & UPF_MAGIC_MULTIPLIER;
>  	struct uart_8250_port *up = up_to_u8250p(port);
> @@ -2544,7 +2542,7 @@ static unsigned int serial8250_get_divisor(struct uart_port *port,
>  	if (port->get_divisor)
>  		return port->get_divisor(port, baud, frac);
>  
> -	return serial8250_do_get_divisor(port, baud, frac);
> +	return serial8250_do_get_divisor(port, baud);
>  }
>  
>  static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, tcflag_t c_cflag)
> 

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

-- 
 i.