Re: [PATCH 13/15] net: jme: Convert tasklet API to new bottom half workqueue mechanism

[Paolo Abeni <pabeni@redhat.com>]

On Mon, 2024-07-01 at 03:13 -0700, Allen wrote:
> > > @@ -1326,22 +1326,22 @@ static void jme_link_change_work(struct work_struct *work)
> > >               jme_start_shutdown_timer(jme);
> > >       }
> > > 
> > > -     goto out_enable_tasklet;
> > > +     goto out_enable_bh_work;
> > > 
> > >  err_out_free_rx_resources:
> > >       jme_free_rx_resources(jme);
> > > -out_enable_tasklet:
> > > -     tasklet_enable(&jme->txclean_task);
> > > -     tasklet_enable(&jme->rxclean_task);
> > > -     tasklet_enable(&jme->rxempty_task);
> > > +out_enable_bh_work:
> > > +     enable_and_queue_work(system_bh_wq, &jme->txclean_bh_work);
> > > +     enable_and_queue_work(system_bh_wq, &jme->rxclean_bh_work);
> > > +     enable_and_queue_work(system_bh_wq, &jme->rxempty_bh_work);
> > 
> > This will unconditionally schedule the rxempty_bh_work and is AFAICS a
> > different behavior WRT prior this patch.
> > 
> > In turn the rxempty_bh_work() will emit (almost unconditionally) the
> > 'RX Queue Full!' message, so the change should be visibile to the user.
> > 
> > I think you should queue the work only if it was queued at cancel time.
> > You likely need additional status to do that.
> > 
> 
>  Thank you for taking the time out to review. Now that it's been a week, I was
> preparing to send out version 3. Before I do that, I want to make sure if this
> the below approach is acceptable.

I _think_ the following does not track the  rxempty_bh_work 'queued'
status fully/correctly.

> @@ -1282,9 +1282,9 @@ static void jme_link_change_work(struct work_struct *work)
>                 jme_stop_shutdown_timer(jme);
> 
>         jme_stop_pcc_timer(jme);
> -       tasklet_disable(&jme->txclean_task);
> -       tasklet_disable(&jme->rxclean_task);
> -       tasklet_disable(&jme->rxempty_task);
> +       disable_work_sync(&jme->txclean_bh_work);
> +       disable_work_sync(&jme->rxclean_bh_work);
> +       disable_work_sync(&jme->rxempty_bh_work);

I think the above should be:

	  jme->rxempty_bh_work_queued = disable_work_sync(&jme->rxempty_bh_work);

[...]
> @@ -1326,22 +1326,23 @@ static void jme_link_change_work(struct
> work_struct *work)
>                 jme_start_shutdown_timer(jme);
>         }
> 
> -       goto out_enable_tasklet;
> +       goto out_enable_bh_work;
> 
>  err_out_free_rx_resources:
>         jme_free_rx_resources(jme);
> -out_enable_tasklet:
> -       tasklet_enable(&jme->txclean_task);
> -       tasklet_enable(&jme->rxclean_task);
> -       tasklet_enable(&jme->rxempty_task);
> +out_enable_bh_work:
> +       enable_and_queue_work(system_bh_wq, &jme->txclean_bh_work);
> +       enable_and_queue_work(system_bh_wq, &jme->rxclean_bh_work);
> +       if (jme->rxempty_bh_work_queued)
> +               enable_and_queue_work(system_bh_wq, &jme->rxempty_bh_work);

Missing:

	  else
		enable_work(system_bh_wq, &jme->rxempty_bh_work);

[...]
> @@ -3180,9 +3182,9 @@ jme_suspend(struct device *dev)
>         netif_stop_queue(netdev);
>         jme_stop_irq(jme);
> 
> -       tasklet_disable(&jme->txclean_task);
> -       tasklet_disable(&jme->rxclean_task);
> -       tasklet_disable(&jme->rxempty_task);
> +       disable_work_sync(&jme->txclean_bh_work);
> +       disable_work_sync(&jme->rxclean_bh_work);
> +       disable_work_sync(&jme->rxempty_bh_work);

should be:

	  jme->rxempty_bh_work_queued = disable_work_sync(&jme->rxempty_bh_work);	


> 
> @@ -3198,9 +3200,10 @@ jme_suspend(struct device *dev)
>                 jme->phylink = 0;
>         }
> 
> -       tasklet_enable(&jme->txclean_task);
> -       tasklet_enable(&jme->rxclean_task);
> -       tasklet_enable(&jme->rxempty_task);
> +       enable_and_queue_work(system_bh_wq, &jme->txclean_bh_work);
> +       enable_and_queue_work(system_bh_wq, &jme->rxclean_bh_work);
> +       jme->rxempty_bh_work_queued = true;
> +       enable_and_queue_work(system_bh_wq, &jme->rxempty_bh_work);

should be:

	if (jme->rxempty_bh_work_queued)
        	enable_and_queue_work(system_bh_wq, &jme->rxempty_bh_work);
	else
		enable_work(system_bh_wq, &jme->rxempty_bh_work);

I think the above ones are the only places where you need to touch
'rxempty_bh_work_queued'.


[...]
>   Do we need a flag for rxclean and txclean too?

Functionally speaking I don't think it will be necessary, as
rxclean_bh_work() and txclean_bh_work() don't emit warnings on spurious
invocation.

Thanks,

Paolo