mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Baochen Qiang <quic_bqiang@quicinc.com>
To: Johan Hovold <johan+linaro@kernel.org>,
	Jeff Johnson <jjohnson@kernel.org>
Cc: Miaoqing Pan <quic_miaoqing@quicinc.com>,
	<linux-wireless@vger.kernel.org>, <ath11k@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <stable@vger.kernel.org>
Subject: Re: [PATCH v2 4/5] wifi: ath11k: fix source ring-buffer corruption
Date: Wed, 25 Jun 2025 18:00:04 +0800	[thread overview]
Message-ID: <73e7548b-fb23-4887-a575-dfa0f681a0dd@quicinc.com> (raw)
In-Reply-To: <20250604143457.26032-5-johan+linaro@kernel.org>



On 6/4/2025 10:34 PM, Johan Hovold wrote:
> Add the missing memory barrier to make sure that LMAC source ring
> descriptors are written before updating the head pointer to avoid
> passing stale data to the firmware on weakly ordered architectures like
> aarch64.
> 
> Note that non-LMAC rings use MMIO write accessors which have the
> required write memory barrier.
> 
> Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
> 
> Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
> Cc: stable@vger.kernel.org      # 5.6
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>  drivers/net/wireless/ath/ath11k/hal.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c
> index b1f5a927dddd..927ed2bc3fbf 100644
> --- a/drivers/net/wireless/ath/ath11k/hal.c
> +++ b/drivers/net/wireless/ath/ath11k/hal.c
> @@ -862,7 +862,11 @@ void ath11k_hal_srng_access_end(struct ath11k_base *ab, struct hal_srng *srng)
>  		if (srng->ring_dir == HAL_SRNG_DIR_SRC) {
>  			srng->u.src_ring.last_tp =
>  				*(volatile u32 *)srng->u.src_ring.tp_addr;
> -			*srng->u.src_ring.hp_addr = srng->u.src_ring.hp;
> +			/* Make sure descriptor is written before updating the
> +			 * head pointer.
> +			 */
> +			dma_wmb();
> +			WRITE_ONCE(*srng->u.src_ring.hp_addr, srng->u.src_ring.hp);
>  		} else {
>  			srng->u.dst_ring.last_hp = *srng->u.dst_ring.hp_addr;
>  			*srng->u.dst_ring.tp_addr = srng->u.dst_ring.tp;
> @@ -871,6 +875,10 @@ void ath11k_hal_srng_access_end(struct ath11k_base *ab, struct hal_srng *srng)
>  		if (srng->ring_dir == HAL_SRNG_DIR_SRC) {
>  			srng->u.src_ring.last_tp =
>  				*(volatile u32 *)srng->u.src_ring.tp_addr;
> +			/* Assume implementation use an MMIO write accessor
> +			 * which has the required wmb() so that the descriptor
> +			 * is written before the updating the head pointer.
> +			 */
>  			ath11k_hif_write32(ab,
>  					   (unsigned long)srng->u.src_ring.hp_addr -
>  					   (unsigned long)ab->mem,

Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>


  reply	other threads:[~2025-06-25 10:00 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-04 14:34 [PATCH v2 0/5] wifi: ath11k: fix dest " Johan Hovold
2025-06-04 14:34 ` [PATCH v2 1/5] " Johan Hovold
2025-06-05  9:12   ` Baochen Qiang
2025-06-25  9:59   ` Baochen Qiang
2025-06-04 14:34 ` [PATCH v2 2/5] wifi: ath11k: use plain access for descriptor length Johan Hovold
2025-06-25  9:59   ` Baochen Qiang
2025-06-04 14:34 ` [PATCH v2 3/5] wifi: ath11k: use plain accesses for monitor descriptor Johan Hovold
2025-06-25  9:59   ` Baochen Qiang
2025-06-04 14:34 ` [PATCH v2 4/5] wifi: ath11k: fix source ring-buffer corruption Johan Hovold
2025-06-25 10:00   ` Baochen Qiang [this message]
2025-06-04 14:34 ` [PATCH v2 5/5] wifi: ath11k: fix dest ring-buffer corruption when ring is full Johan Hovold
2025-06-25 10:00   ` Baochen Qiang
2025-06-26 23:15 ` [PATCH v2 0/5] wifi: ath11k: fix dest ring-buffer corruption Jeff Johnson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=73e7548b-fb23-4887-a575-dfa0f681a0dd@quicinc.com \
    --to=quic_bqiang@quicinc.com \
    --cc=ath11k@lists.infradead.org \
    --cc=jjohnson@kernel.org \
    --cc=johan+linaro@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=quic_miaoqing@quicinc.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®