Re: [PATCH V6 6/6] of: unittest: Statically apply overlays using fdtoverlay

[Frank Rowand <frowand.list@gmail.com>]

On 1/25/21 9:15 PM, Frank Rowand wrote:
> On 1/22/21 4:50 AM, Viresh Kumar wrote:
>> Now that fdtoverlay is part of the kernel build, start using it to test
>> the unitest overlays we have by applying them statically. Create a new
>> base file static_base.dts which includes other .dtsi files.
>>
>> Some unittest overlays deliberately contain errors that unittest checks
>> for. These overlays will cause fdtoverlay to fail, and are thus not
>> included in the static_test.dtb.
>>
>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>> ---
>>  drivers/of/unittest-data/Makefile        | 51 ++++++++++++++++++++++++
>>  drivers/of/unittest-data/static_base.dts |  5 +++
>>  2 files changed, 56 insertions(+)
>>  create mode 100644 drivers/of/unittest-data/static_base.dts
>>
>> diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
>> index 009f4045c8e4..586fa8cda916 100644
>> --- a/drivers/of/unittest-data/Makefile
>> +++ b/drivers/of/unittest-data/Makefile
>> @@ -34,7 +34,58 @@ DTC_FLAGS_overlay += -@
>>  DTC_FLAGS_overlay_bad_phandle += -@
>>  DTC_FLAGS_overlay_bad_symbol += -@
>>  DTC_FLAGS_overlay_base += -@
>> +DTC_FLAGS_static_base += -@
>>  DTC_FLAGS_testcases += -@
>>  
>>  # suppress warnings about intentional errors
>>  DTC_FLAGS_testcases += -Wno-interrupts_property
>> +
>> +# Apply overlays statically with fdtoverlay.  This is a build time test that
>> +# the overlays can be applied successfully by fdtoverlay.  This does not
>> +# guarantee that the overlays can be applied successfully at run time by
>> +# unittest, but it provides a bit of build time test coverage for those
>> +# who do not execute unittest.
>> +#
>> +# The overlays are applied on top of static_base.dtb to create static_test.dtb
>> +# If fdtoverlay detects an error than the kernel build will fail.
>> +# static_test.dtb is not consumed by unittest.
>> +#
>> +# Some unittest overlays deliberately contain errors that unittest checks for.
>> +# These overlays will cause fdtoverlay to fail, and are thus not included
>> +# in the static test:
>> +#			overlay_bad_add_dup_node.dtb \
>> +#			overlay_bad_add_dup_prop.dtb \
>> +#			overlay_bad_phandle.dtb \
>> +#			overlay_bad_symbol.dtb \
>> +#			overlay_base.dtb \
>> +
>> +apply_static_overlay := overlay.dtb \
> 
> rename apply_static_overlay to apply_static_overlay_2:
> 
>    apply_static_overlay_2 := overlay.dtb
> 
> Then the remainder of apply_static_overlay becomes apply_static_overlay_1:
> 
>    apply_static_overlay_1 :=
>> +			overlay_0.dtb \
>> +			overlay_1.dtb \
>> +			overlay_2.dtb \
>> +			overlay_3.dtb \
>> +			overlay_4.dtb \
>> +			overlay_5.dtb \
>> +			overlay_6.dtb \
>> +			overlay_7.dtb \
>> +			overlay_8.dtb \
>> +			overlay_9.dtb \
>> +			overlay_10.dtb \
>> +			overlay_11.dtb \
>> +			overlay_12.dtb \
>> +			overlay_13.dtb \
>> +			overlay_15.dtb \
>> +			overlay_gpio_01.dtb \
>> +			overlay_gpio_02a.dtb \
>> +			overlay_gpio_02b.dtb \
>> +			overlay_gpio_03.dtb \
>> +			overlay_gpio_04a.dtb \
>> +			overlay_gpio_04b.dtb
>> +
>> +quiet_cmd_fdtoverlay = FDTOVERLAY $@
>> +      cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $^
>> +
> 
> 
>> +$(obj)/static_test.dtb: $(obj)/static_base.dtb $(addprefix $(obj)/,$(apply_static_overlay))
>> +	$(call if_changed,fdtoverlay)
> 
> Split the static_test.dtb into _1 and _2:
> 
>> +$(obj)/static_test_1.dtb: $(obj)/static_base_1.dtb $(addprefix $(obj)/,$(apply_static_overlay_1))
>> +	$(call if_changed,fdtoverlay)
> 
>> +$(obj)/static_test_2.dtb: $(obj)/static_base_2.dtb $(addprefix $(obj)/,$(apply_static_overlay_2))
>> +	$(call if_changed,fdtoverlay)
> 
> 
>> +
>> +always-$(CONFIG_OF_OVERLAY) += static_test.dtb

and of source the config line becomes static_test_1.dtb and static_test_2.dtb

Hopefully I haven't missed any other details...

-Frank

> 
> 
>> diff --git a/drivers/of/unittest-data/static_base.dts b/drivers/of/unittest-data/static_base.dts
>> new file mode 100644
>> index 000000000000..3c9af4aefb96
>> --- /dev/null
>> +++ b/drivers/of/unittest-data/static_base.dt> @@ -0,0 +1,5 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/dts-v1/;
>> +
>> +#include "overlay_common.dtsi"
>> +#include "testcases_common.dtsi"
>>
> 
> Split static_base.dts into static_base_1.dts and static_base_2.dts:
> 
> static_base_1.dts:
> 
>> +// SPDX-License-Identifier: GPL-2.0
>> +/dts-v1/;
>> +
>> +#include "testcases_common.dtsi"
> 
> 
> static_base_2.dts:
> 
>> +// SPDX-License-Identifier: GPL-2.0
>> +/dts-v1/;
>> +
>> +#include "overlay_common.dtsi"