From: "Rustad, Mark D" <mark.d.rustad@intel.com>
To: Andi Kleen <andi@firstfloor.org>,
"Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
Cc: "<linux-kernel@vger.kernel.org>" <linux-kernel@vger.kernel.org>,
"akpm@linux-foundation.org" <akpm@linux-foundation.org>,
Andi Kleen <ak@linux.intel.com>, Netdev <netdev@vger.kernel.org>
Subject: Re: [PATCH 1/8] ixgbe: Out of line ixgbe_read/write_reg
Date: Mon, 19 May 2014 22:00:52 +0000 [thread overview]
Message-ID: <7477F573-2AED-4D26-8D5F-DB80DFA7EDEF@intel.com> (raw)
In-Reply-To: <1400276595-6965-2-git-send-email-andi@firstfloor.org>
On May 16, 2014, at 2:43 PM, Andi Kleen <andi@firstfloor.org> wrote:
> From: Andi Kleen <ak@linux.intel.com>
>
> ixgbe_read_reg and ixgbe_write_reg are frequently called and are very big
> because they have complex error handling code.
Actually, this patch doesn't do anything to ixgbe_write_reg, which would almost certainly be very bad for performance, but instead changes ixgbe_write_reg64. The latter is not in a performance-sensitive path, but is only called from one site, so there is little reason to take it out-of-line.
I already have a patch in queue to make ixgbe_read_reg out-of-line, because it does have a very costly memory footprint inline, as you have found.
> Moving them out of line saves ~27k text in the ixgbe driver.
>
> text data bss dec hex filename
> 14220873 2008072 1507328 17736273 10ea251 vmlinux-before-ixgbe
> 14193673 2003976 1507328 17704977 10e2811 vmlinux-ixgbe
>
> Cc: netdev@vger.kernel.org
> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Signed-off-by: Andi Kleen <ak@linux.intel.com>
> ---
> drivers/net/ethernet/intel/ixgbe/ixgbe_common.h | 22 ++--------------------
> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 22 ++++++++++++++++++++++
> 2 files changed, 24 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
> index f12c40f..05f094d 100644
> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
> @@ -162,28 +162,10 @@ static inline void writeq(u64 val, void __iomem *addr)
> }
> #endif
>
> -static inline void ixgbe_write_reg64(struct ixgbe_hw *hw, u32 reg, u64 value)
> -{
> - u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
> +void ixgbe_write_reg64(struct ixgbe_hw *hw, u32 reg, u64 value);
> +u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg);
>
> - if (ixgbe_removed(reg_addr))
> - return;
> - writeq(value, reg_addr + reg);
> -}
> #define IXGBE_WRITE_REG64(a, reg, value) ixgbe_write_reg64((a), (reg), (value))
> -
> -static inline u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg)
> -{
> - u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
> - u32 value;
> -
> - if (ixgbe_removed(reg_addr))
> - return IXGBE_FAILED_READ_REG;
> - value = readl(reg_addr + reg);
> - if (unlikely(value == IXGBE_FAILED_READ_REG))
> - ixgbe_check_remove(hw, reg);
> - return value;
> -}
> #define IXGBE_READ_REG(a, reg) ixgbe_read_reg((a), (reg))
>
> #define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) \
> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> index d62e7a2..5f81f62 100644
> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> @@ -371,6 +371,28 @@ void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value)
> pci_write_config_word(adapter->pdev, reg, value);
> }
>
> +void ixgbe_write_reg64(struct ixgbe_hw *hw, u32 reg, u64 value)
> +{
> + u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
> +
> + if (ixgbe_removed(reg_addr))
> + return;
> + writeq(value, reg_addr + reg);
> +}
> +
> +u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg)
> +{
> + u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
> + u32 value;
> +
> + if (ixgbe_removed(reg_addr))
> + return IXGBE_FAILED_READ_REG;
> + value = readl(reg_addr + reg);
> + if (unlikely(value == IXGBE_FAILED_READ_REG))
> + ixgbe_check_remove(hw, reg);
> + return value;
> +}
> +
> static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter)
> {
> BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state));
> --
> 1.9.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Mark Rustad, Networking Division, Intel Corporation
next prev parent reply other threads:[~2014-05-19 22:01 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-16 21:43 Fix some common inline bloat Andi Kleen
2014-05-16 21:43 ` [PATCH 1/8] ixgbe: Out of line ixgbe_read/write_reg Andi Kleen
2014-05-19 9:14 ` David Laight
2014-05-19 22:00 ` Rustad, Mark D [this message]
2014-05-19 23:25 ` Andi Kleen
2014-05-20 17:06 ` Rustad, Mark D
2014-05-16 21:43 ` [PATCH 2/8] radeonfb: Out of line errata workarounds Andi Kleen
2014-05-16 21:43 ` [PATCH 3/8] list: Out of line INIT_LIST_HEAD and list_del Andi Kleen
2014-05-17 0:03 ` Dave Jones
2014-05-17 2:37 ` Andi Kleen
2014-05-17 0:03 ` Eric Dumazet
2014-05-16 21:43 ` [PATCH 4/8] e1000e: Out of line __ew32_prepare/__ew32 Andi Kleen
2014-05-17 3:23 ` Stephen Hemminger
2014-05-16 21:43 ` [PATCH 5/8] x86: Out of line get_dma_ops Andi Kleen
2014-05-16 21:43 ` [PATCH 6/8] ftrace: Out of line ftrace_trigger_soft_disabled Andi Kleen
2014-05-16 21:43 ` [PATCH 7/8] radeon: Out of line radeon_get_ib_value Andi Kleen
2014-05-20 16:16 ` Marek Olšák
2014-05-20 17:04 ` Andi Kleen
2014-05-20 18:14 ` Christian König
2014-05-16 21:43 ` [PATCH 8/8] Kbuild: add inline-account tool to find inline bloat Andi Kleen
2014-05-17 8:31 ` Sam Ravnborg
2014-05-17 9:36 ` Sam Ravnborg
2014-05-17 16:51 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7477F573-2AED-4D26-8D5F-DB80DFA7EDEF@intel.com \
--to=mark.d.rustad@intel.com \
--cc=ak@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=andi@firstfloor.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®