From: Paul Menzel <pmenzel@molgen.mpg.de>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
intel-wired-lan@lists.osuosl.org,
Jakub Kicinski <kuba@kernel.org>,
"David S. Miller" <davem@davemloft.net>
Subject: Re: [Intel-wired-lan] [PATCH v2] e1000e: Increase iteration on polling MDIC ready bit
Date: Thu, 24 Sep 2020 17:32:12 +0200 [thread overview]
Message-ID: <748efbf9-573f-ab2a-0c82-a7b2a11cda60@molgen.mpg.de> (raw)
In-Reply-To: <20200924150958.18016-1-kai.heng.feng@canonical.com>
Dear Kai-Heng,
Thank you for sending version 2.
Am 24.09.20 um 17:09 schrieb Kai-Heng Feng:
> We are seeing the following error after S3 resume:
I’d be great if you added the system and used hardware, you are seeing
this with.
> [ 704.746874] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
> [ 704.844232] e1000e 0000:00:1f.6 eno1: MDI Write did not complete
A follow-up patch, should extend the message to include the timeout value.
> MDI Write did not complete did not complete in … seconds.
According to the Linux timestamps it’s 98 ms, which makes sense, as (640
* 3 * 50 μs = 96 ms).
What crappy hardware is this, that it takes longer than 100 ms?
> [ 704.902817] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
> [ 704.903075] e1000e 0000:00:1f.6 eno1: reading PHY page 769 (or 0x6020 shifted) reg 0x17
> [ 704.903281] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
> [ 704.903486] e1000e 0000:00:1f.6 eno1: writing PHY page 769 (or 0x6020 shifted) reg 0x17
> [ 704.943155] e1000e 0000:00:1f.6 eno1: MDI Error
> ...
> [ 705.108161] e1000e 0000:00:1f.6 eno1: Hardware Error
>
> As Andrew Lunn pointed out, MDIO has nothing to do with phy, and indeed
> increase polling iteration can resolve the issue.
Please explicitly state, what the current timeout value is, and what it
is increased to.
640 * 3 * 50 μs = 96 ms
640 * 10 * 50 μs = 320 ms
The macro definition also misses the unit.
/* SerDes Control */
#define E1000_GEN_POLL_TIMEOUT 640
How did you determine, that tenfold that value is good. And not
eightfold, for example? Please give the exact value (Linux log message
timestamps should be enough), what the hardware needs now.
As a commit message summary, I suggest:
> e1000e: Increase MDIC ready bit polling timeout from 96 ms to 320 ms
> While at it, also move the delay to the end of loop, to potentially save
> 50 us.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v2:
> - Increase polling iteration instead of powering down the phy.
>
> drivers/net/ethernet/intel/e1000e/phy.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
> index e11c877595fb..72968a01164b 100644
> --- a/drivers/net/ethernet/intel/e1000e/phy.c
> +++ b/drivers/net/ethernet/intel/e1000e/phy.c
> @@ -203,11 +203,12 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
> * Increasing the time out as testing showed failures with
> * the lower time out
> */
> - for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
> - udelay(50);
> + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 10); i++) {
> mdic = er32(MDIC);
> if (mdic & E1000_MDIC_READY)
> break;
> +
> + udelay(50);
> }
> if (!(mdic & E1000_MDIC_READY)) {
> e_dbg("MDI Write did not complete\n");
>
next prev parent reply other threads:[~2020-09-24 15:32 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-23 7:47 [PATCH] e1000e: Power cycle phy on PM resume Kai-Heng Feng
2020-09-23 12:17 ` Andrew Lunn
2020-09-23 14:44 ` Kai-Heng Feng
2020-09-23 15:37 ` Andrew Lunn
2020-09-24 12:50 ` Kai-Heng Feng
2020-09-23 13:28 ` [Intel-wired-lan] " Paul Menzel
2020-09-23 14:46 ` Kai-Heng Feng
2020-09-23 15:02 ` Paul Menzel
2020-09-23 19:28 ` Andrew Lunn
2020-09-24 13:02 ` Paul Menzel
2020-09-24 15:09 ` [PATCH v2] e1000e: Increase iteration on polling MDIC ready bit Kai-Heng Feng
2020-09-24 15:32 ` Paul Menzel [this message]
2020-09-24 16:04 ` [Intel-wired-lan] " Andrew Lunn
2020-09-24 15:53 ` Andrew Lunn
2020-09-24 16:04 ` Kai-Heng Feng
2020-09-25 8:50 ` David Laight
2020-09-25 13:29 ` Andrew Lunn
2020-09-26 10:08 ` David Laight
2020-09-24 16:45 ` [PATCH v3] " Kai-Heng Feng
2020-09-24 19:57 ` Andrew Lunn
2020-09-25 3:57 ` Kai-Heng Feng
2020-09-25 5:16 ` [Intel-wired-lan] " Paul Menzel
2020-09-28 8:36 ` [PATCH v4] e1000e: Increase polling timeout on " Kai-Heng Feng
2020-09-29 13:08 ` [Intel-wired-lan] " Neftin, Sasha
2020-09-29 13:31 ` Kai-Heng Feng
2020-09-29 13:46 ` Neftin, Sasha
2020-09-29 15:08 ` Kai-Heng Feng
2020-09-29 15:11 ` David Laight
2020-09-29 15:12 ` Kai-Heng Feng
2020-09-30 6:54 ` Vitaly Lifshits
2020-10-05 6:23 ` Kai-Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=748efbf9-573f-ab2a-0c82-a7b2a11cda60@molgen.mpg.de \
--to=pmenzel@molgen.mpg.de \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=kai.heng.feng@canonical.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®