mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexandre ghiti <alex@ghiti.fr>
To: Jisheng Zhang <jszhang@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/5] riscv: mm: init: try best to use IS_ENABLED(CONFIG_64BIT) instead of #ifdef
Date: Thu, 16 Dec 2021 11:41:25 +0100	[thread overview]
Message-ID: <74995c52-dfd4-d07e-cc0f-1a934be9cc16@ghiti.fr> (raw)
In-Reply-To: <20211206150353.731-3-jszhang@kernel.org>

hi Jisheng,

On 12/6/21 16:03, Jisheng Zhang wrote:
> Try our best to replace the conditional compilation using
> "#ifdef CONFIG_64BIT" by a check for "IS_ENABLED(CONFIG_64BIT)", to
> simplify the code and to increase compile coverage.
>
> Now we can also remove the __maybe_unused used in max_mapped_addr
> declaration.
>
> We also remove the BUG_ON check of mapping the last 4K bytes of the
> addressable memory since this is always true for every kernel actually.


That could have been a different patch as this does not fit the patch 
subject, but anyway:

Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>

Thanks,

Alex


>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> ---
>   arch/riscv/mm/init.c | 43 ++++++++++++++++---------------------------
>   1 file changed, 16 insertions(+), 27 deletions(-)
>
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 745f26a3b02e..4edf5600bea9 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -102,10 +102,9 @@ static void __init print_vm_layout(void)
>   		  (unsigned long)VMALLOC_END);
>   	print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
>   		  (unsigned long)high_memory);
> -#ifdef CONFIG_64BIT
> -	print_mlm("kernel", (unsigned long)KERNEL_LINK_ADDR,
> -		  (unsigned long)ADDRESS_SPACE_END);
> -#endif
> +	if (IS_ENABLED(CONFIG_64BIT))
> +		print_mlm("kernel", (unsigned long)KERNEL_LINK_ADDR,
> +			  (unsigned long)ADDRESS_SPACE_END);
>   }
>   #else
>   static void print_vm_layout(void) { }
> @@ -163,7 +162,7 @@ static void __init setup_bootmem(void)
>   {
>   	phys_addr_t vmlinux_end = __pa_symbol(&_end);
>   	phys_addr_t vmlinux_start = __pa_symbol(&_start);
> -	phys_addr_t __maybe_unused max_mapped_addr;
> +	phys_addr_t max_mapped_addr;
>   	phys_addr_t phys_ram_end;
>   
>   #ifdef CONFIG_XIP_KERNEL
> @@ -172,17 +171,16 @@ static void __init setup_bootmem(void)
>   
>   	memblock_enforce_memory_limit(memory_limit);
>   
> -	/*
> -	 * Reserve from the start of the kernel to the end of the kernel
> -	 */
> -#if defined(CONFIG_64BIT) && defined(CONFIG_STRICT_KERNEL_RWX)
>   	/*
>   	 * Make sure we align the reservation on PMD_SIZE since we will
>   	 * map the kernel in the linear mapping as read-only: we do not want
>   	 * any allocation to happen between _end and the next pmd aligned page.
>   	 */
> -	vmlinux_end = (vmlinux_end + PMD_SIZE - 1) & PMD_MASK;
> -#endif
> +	if (IS_ENABLED(CONFIG_64BIT) && IS_ENABLED(CONFIG_STRICT_KERNEL_RWX))
> +		vmlinux_end = (vmlinux_end + PMD_SIZE - 1) & PMD_MASK;
> +	/*
> +	 * Reserve from the start of the kernel to the end of the kernel
> +	 */
>   	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
>   
>   
> @@ -190,7 +188,6 @@ static void __init setup_bootmem(void)
>   #ifndef CONFIG_XIP_KERNEL
>   	phys_ram_base = memblock_start_of_DRAM();
>   #endif
> -#ifndef CONFIG_64BIT
>   	/*
>   	 * memblock allocator is not aware of the fact that last 4K bytes of
>   	 * the addressable memory can not be mapped because of IS_ERR_VALUE
> @@ -200,10 +197,11 @@ static void __init setup_bootmem(void)
>   	 * address space is occupied by the kernel mapping then this check must
>   	 * be done as soon as the kernel mapping base address is determined.
>   	 */
> -	max_mapped_addr = __pa(~(ulong)0);
> -	if (max_mapped_addr == (phys_ram_end - 1))
> -		memblock_set_current_limit(max_mapped_addr - 4096);
> -#endif
> +	if (!IS_ENABLED(CONFIG_64BIT)) {
> +		max_mapped_addr = __pa(~(ulong)0);
> +		if (max_mapped_addr == (phys_ram_end - 1))
> +			memblock_set_current_limit(max_mapped_addr - 4096);
> +	}
>   
>   	min_low_pfn = PFN_UP(phys_ram_base);
>   	max_low_pfn = max_pfn = PFN_DOWN(phys_ram_end);
> @@ -616,14 +614,6 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>   	BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
>   	BUG_ON((kernel_map.phys_addr % PMD_SIZE) != 0);
>   
> -#ifdef CONFIG_64BIT
> -	/*
> -	 * The last 4K bytes of the addressable memory can not be mapped because
> -	 * of IS_ERR_VALUE macro.
> -	 */
> -	BUG_ON((kernel_map.virt_addr + kernel_map.size) > ADDRESS_SPACE_END - SZ_4K);
> -#endif
> -
>   	pt_ops.alloc_pte = alloc_pte_early;
>   	pt_ops.get_pte_virt = get_pte_virt_early;
>   #ifndef __PAGETABLE_PMD_FOLDED
> @@ -735,10 +725,9 @@ static void __init setup_vm_final(void)
>   		}
>   	}
>   
> -#ifdef CONFIG_64BIT
>   	/* Map the kernel */
> -	create_kernel_page_table(swapper_pg_dir, false);
> -#endif
> +	if (IS_ENABLED(CONFIG_64BIT))
> +		create_kernel_page_table(swapper_pg_dir, false);
>   
>   	/* Clear fixmap PTE and PMD mappings */
>   	clear_fixmap(FIX_PTE);

  reply	other threads:[~2021-12-16 10:41 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-06 15:03 [PATCH v2 0/5] riscv: mm: init clean up #ifdefs Jisheng Zhang
2021-12-06 15:03 ` [PATCH v2 1/5] riscv: mm: init: remove unnecessary "#ifdef CONFIG_CRASH_DUMP" Jisheng Zhang
2021-12-06 15:03 ` [PATCH v2 2/5] riscv: mm: init: try best to use IS_ENABLED(CONFIG_64BIT) instead of #ifdef Jisheng Zhang
2021-12-16 10:41   ` Alexandre ghiti [this message]
2021-12-06 15:03 ` [PATCH v2 3/5] riscv: mm: init: remove _pt_ops and use pt_ops directly Jisheng Zhang
2021-12-16 11:09   ` Alexandre ghiti
2021-12-06 15:03 ` [PATCH v2 4/5] riscv: mm: init: try IS_ENABLED(CONFIG_XIP_KERNEL) instead of #ifdef Jisheng Zhang
2021-12-06 15:03 ` [PATCH v2 5/5] riscv: mm: init: try best to remove #ifdef CONFIG_XIP_KERNEL usage Jisheng Zhang
2022-01-18 19:15 ` [PATCH v2 0/5] riscv: mm: init clean up #ifdefs Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=74995c52-dfd4-d07e-cc0f-1a934be9cc16@ghiti.fr \
    --to=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=jszhang@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®