From: Marc Gonzalez <marc.w.gonzalez@free.fr>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rafael Wysocki <rjw@rjwysocki.net>,
LKML <linux-kernel@vger.kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Alexey Brodkin <alexey.brodkin@synopsys.com>,
Peter Zijlstra <peterz@infradead.org>,
Will Deacon <will@kernel.org>,
Russell King <rmk+kernel@armlinux.org.uk>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Tejun Heo <tj@kernel.org>, Mark Brown <broonie@kernel.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: [RFC PATCH v1] devres: align devres.data strictly only for devm_kmalloc()
Date: Tue, 17 Dec 2019 16:30:54 +0100 [thread overview]
Message-ID: <74ae22cd-08c1-d846-3e1d-cbc38db87442@free.fr> (raw)
Commit a66d972465d15 ("devres: Align data[] to ARCH_KMALLOC_MINALIGN")
increased the alignment of devres.data unconditionally.
Some platforms have very strict alignment requirements for DMA-safe
addresses, e.g. 128 bytes on arm64. There, struct devres amounts to:
3 pointers + pad_to_128 + data + pad_to_256
i.e. ~220 bytes of padding.
Let's enforce the alignment only for devm_kmalloc().
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
---
I had not been aware that dynamic allocation granularity on arm64 was
128 bytes. This means there's a lot of waste on small allocations.
I suppose there's no easy solution, though.
---
drivers/base/devres.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index 0bbb328bd17f..bf39188613d9 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -26,14 +26,7 @@ struct devres_node {
struct devres {
struct devres_node node;
- /*
- * Some archs want to perform DMA into kmalloc caches
- * and need a guaranteed alignment larger than
- * the alignment of a 64-bit integer.
- * Thus we use ARCH_KMALLOC_MINALIGN here and get exactly the same
- * buffer alignment as if it was allocated by plain kmalloc().
- */
- u8 __aligned(ARCH_KMALLOC_MINALIGN) data[];
+ u8 data[];
};
struct devres_group {
@@ -789,9 +782,16 @@ static void devm_kmalloc_release(struct device *dev, void *res)
/* noop */
}
+#define DEVM_KMALLOC_PADDING_SIZE \
+ (ARCH_KMALLOC_MINALIGN - sizeof(struct devres) % ARCH_KMALLOC_MINALIGN)
+
static int devm_kmalloc_match(struct device *dev, void *res, void *data)
{
- return res == data;
+ /*
+ * 'res' is dr->data (not DMA-safe)
+ * 'data' is the hand-aligned address from devm_kmalloc
+ */
+ return res + DEVM_KMALLOC_PADDING_SIZE == data;
}
/**
@@ -811,6 +811,9 @@ void * devm_kmalloc(struct device *dev, size_t size, gfp_t gfp)
{
struct devres *dr;
+ /* Add enough padding to provide a DMA-safe address */
+ size += DEVM_KMALLOC_PADDING_SIZE;
+
/* use raw alloc_dr for kmalloc caller tracing */
dr = alloc_dr(devm_kmalloc_release, size, gfp, dev_to_node(dev));
if (unlikely(!dr))
@@ -822,7 +825,7 @@ void * devm_kmalloc(struct device *dev, size_t size, gfp_t gfp)
*/
set_node_dbginfo(&dr->node, "devm_kzalloc_release", size);
devres_add(dev, dr->data);
- return dr->data;
+ return dr->data + DEVM_KMALLOC_PADDING_SIZE;
}
EXPORT_SYMBOL_GPL(devm_kmalloc);
--
2.17.1
next reply other threads:[~2019-12-17 15:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-17 15:30 Marc Gonzalez [this message]
2019-12-17 15:45 ` Greg Kroah-Hartman
2019-12-17 16:17 ` Marc Gonzalez
2019-12-18 14:20 ` Alexey Brodkin
2019-12-18 15:40 ` Marc Gonzalez
2019-12-20 10:19 ` Marc Gonzalez
2019-12-20 10:22 ` Greg Kroah-Hartman
2019-12-20 10:22 ` Greg Kroah-Hartman
2019-12-20 12:05 ` Marc Gonzalez
2019-12-20 17:19 ` Peter Zijlstra
2019-12-20 14:06 ` Peter Zijlstra
2019-12-20 14:16 ` Greg Kroah-Hartman
2019-12-20 15:01 ` Robin Murphy
2019-12-20 17:13 ` Peter Zijlstra
2019-12-20 22:02 ` Robin Murphy
2020-01-06 10:05 ` Peter Zijlstra
2019-12-20 19:32 ` Alexey Brodkin
2019-12-20 20:23 ` Peter Zijlstra
2019-12-20 21:02 ` Alexey Brodkin
2019-12-20 21:47 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74ae22cd-08c1-d846-3e1d-cbc38db87442@free.fr \
--to=marc.w.gonzalez@free.fr \
--cc=alexey.brodkin@synopsys.com \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=rjw@rjwysocki.net \
--cc=rmk+kernel@armlinux.org.uk \
--cc=robin.murphy@arm.com \
--cc=tj@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®