Re: [PATCH 4/5] pxa/mioa701: add V3 gain configuration for Maxim 1586 voltage regulator

[pHilipp Zabel <philipp.zabel@gmail.com>]

That should have been "[PATCH 2/3] pxa/mioa701: ..."

On Thu, May 28, 2009 at 7:15 AM, Philipp Zabel <philipp.zabel@gmail.com> wrote:
> Maxim 1586 V3 gain can be configured by external resistors
> (R24, R25) connected to the FB3 pin. To avoid accidental
> overvoltage, it now requires this gain to be configured
> explicitly.
>
> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
> ---
>  arch/arm/mach-pxa/mioa701.c |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
> index 54c91db..d805218 100644
> --- a/arch/arm/mach-pxa/mioa701.c
> +++ b/arch/arm/mach-pxa/mioa701.c
> @@ -746,6 +746,7 @@ static struct max1586_subdev_data max1586_subdevs[] = {
>  static struct max1586_platform_data max1586_info = {
>        .subdevs = max1586_subdevs,
>        .num_subdevs = ARRAY_SIZE(max1586_subdevs),
> +       .v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
>  };
>
>  /*
> --
> 1.6.3.1
>
>