From: pHilipp Zabel <philipp.zabel@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Philipp Zabel <philipp.zabel@gmail.com>
Subject: Re: [PATCH 6/7] MFD: ASIC3: enable DS1WM cell.
Date: Sat, 13 Jun 2009 00:40:06 +0200 [thread overview]
Message-ID: <74d0deb30906121540j738739d4t221b2a2224967227@mail.gmail.com> (raw)
In-Reply-To: <1244219467-32136-7-git-send-email-philipp.zabel@gmail.com>
On Fri, Jun 5, 2009 at 6:31 PM, Philipp Zabel<philipp.zabel@gmail.com> wrote:
> This enables the ASIC3's DS1WM MFD cell, supported by the ds1wm driver.
>
> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
> ---
> drivers/mfd/Kconfig | 1 +
> drivers/mfd/asic3.c | 100 +++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 101 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index ee3927a..9e6d5ee 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -30,6 +30,7 @@ config MFD_SM501_GPIO
> config MFD_ASIC3
> bool "Support for Compaq ASIC3"
> depends on GENERIC_HARDIRQS && GPIOLIB && ARM
> + select MFD_CORE
> ---help---
> This driver supports the ASIC3 multifunction chip found on many
> PDAs (mainly iPAQ and HTC based ones)
> diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
> index d5dd0df..3fadd02 100644
> --- a/drivers/mfd/asic3.c
> +++ b/drivers/mfd/asic3.c
> @@ -17,6 +17,7 @@
> */
>
> #include <linux/kernel.h>
> +#include <linux/delay.h>
> #include <linux/irq.h>
> #include <linux/gpio.h>
> #include <linux/io.h>
> @@ -24,6 +25,8 @@
> #include <linux/platform_device.h>
>
> #include <linux/mfd/asic3.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/ds1wm.h>
>
> enum {
> ASIC3_CLOCK_SPI,
> @@ -616,6 +619,99 @@ static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
> spin_unlock_irqrestore(&asic->lock, flags);
> }
>
> +/* MFD cells (SPI, PWM, LED, DS1WM, MMC) */
> +static struct ds1wm_driver_data ds1wm_pdata = {
> + .active_high = 1,
> +};
> +
> +static struct resource ds1wm_resources[] = {
> + {
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = ASIC3_IRQ_OWM,
> + .start = ASIC3_IRQ_OWM,
> + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
> + },
> +};
> +
> +static int ds1wm_enable(struct platform_device *pdev)
> +{
> + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
> +
> + /* Turn on external clocks and the OWM clock */
> + asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
> + asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
> + asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
> + msleep(1);
> +
> + /* Reset and enable DS1WM */
> + asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
> + ASIC3_EXTCF_OWM_RESET, 1);
> + msleep(1);
> + asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
> + ASIC3_EXTCF_OWM_RESET, 0);
> + msleep(1);
> + asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
> + ASIC3_EXTCF_OWM_EN, 1);
> + msleep(1);
> +
> + return 0;
> +}
> +
> +static int ds1wm_disable(struct platform_device *pdev)
> +{
> + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
> +
> + asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
> + ASIC3_EXTCF_OWM_EN, 0);
> +
> + asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
> + asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
> + asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
> +
> + return 0;
> +}
> +
> +static struct mfd_cell asic3_cell_ds1wm = {
> + .name = "ds1wm",
> + .enable = ds1wm_enable,
> + .disable = ds1wm_disable,
> + .driver_data = &ds1wm_pdata,
> + .num_resources = ARRAY_SIZE(ds1wm_resources),
> + .resources = ds1wm_resources,
> +};
> +
> +static int __init asic3_mfd_probe(struct platform_device *pdev,
> + struct resource *mem)
> +{
> + struct asic3 *asic = platform_get_drvdata(pdev);
> + int ret;
> +
> + /* DS1WM */
> + asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
> + ASIC3_EXTCF_OWM_SMB, 0);
> +
> + ds1wm_resources[0].start = ASIC3_OWM_BASE >> asic->bus_shift;
> + ds1wm_resources[0].end = ds1wm_resources[0].start
> + + (5 << (2 - asic->bus_shift)) - 1;
> +
> + asic3_cell_ds1wm.platform_data = &asic3_cell_ds1wm;
> + asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm);
> +
> + ret = mfd_add_devices(&pdev->dev, pdev->id,
> + &asic3_cell_ds1wm, 1, mem, asic->irq_base);
> +
> + return ret;
> +}
> +
> +static void asic3_mfd_remove(struct platform_device *pdev)
> +{
> + struct asic3 *asic = platform_get_drvdata(pdev);
> +
> + mfd_remove_devices(&pdev->dev);
> +}
I've just noticed that the following hunk got squashed into 7/7 instead of 6/7:
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -737,8 +737,6 @@ static int __init asic3_mfd_probe(struct platform_device *pd
static void asic3_mfd_remove(struct platform_device *pdev)
{
- struct asic3 *asic = platform_get_drvdata(pdev);
-
mfd_remove_devices(&pdev->dev);
}
Please consider replacing those two with the fixed versions I'll send.
> +
> /* Core */
> static int __init asic3_probe(struct platform_device *pdev)
> {
> @@ -683,6 +779,8 @@ static int __init asic3_probe(struct platform_device *pdev)
> */
> memcpy(asic->clocks, asic3_clk_init, sizeof(asic3_clk_init));
>
> + asic3_mfd_probe(pdev, mem);
> +
> dev_info(asic->dev, "ASIC3 Core driver\n");
>
> return 0;
> @@ -704,6 +802,8 @@ static int asic3_remove(struct platform_device *pdev)
> int ret;
> struct asic3 *asic = platform_get_drvdata(pdev);
>
> + asic3_mfd_remove(pdev);
> +
> ret = asic3_gpio_remove(pdev);
> if (ret < 0)
> return ret;
> --
> 1.6.3.1
>
>
regards
Philipp
next prev parent reply other threads:[~2009-06-12 22:40 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-05 16:31 [PATCH 0/7] ASIC3 updates (v2) Philipp Zabel
2009-06-05 16:31 ` [PATCH 1/7] MFD: ASIC3: add asic3_set_register common operation Philipp Zabel
2009-06-05 16:31 ` [PATCH 2/7] MFD: ASIC3: add clock handling for MFD cells Philipp Zabel
2009-06-05 16:31 ` [PATCH 3/7] MFD: ASIC3: add ASIC3 IRQ numbers Philipp Zabel
2009-06-05 16:31 ` [PATCH 4/7] MFD: ASIC3: use resource_size macro instead of local variable Philipp Zabel
2009-06-05 16:31 ` [PATCH 5/7] MFD: ASIC3: remove SD/SDIO controller register definitions Philipp Zabel
2009-06-05 16:31 ` [PATCH 6/7] MFD: ASIC3: enable DS1WM cell Philipp Zabel
2009-06-12 22:40 ` pHilipp Zabel [this message]
2009-06-05 16:31 ` [PATCH 7/7] MFD: ASIC3: enable SD/SDIO cell Philipp Zabel
-- strict thread matches above, loose matches on Subject: below --
2009-06-04 18:36 [PATCH 0/7] ASIC3 updates Philipp Zabel
2009-06-04 18:36 ` [PATCH 6/7] MFD: ASIC3: enable DS1WM cell Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74d0deb30906121540j738739d4t221b2a2224967227@mail.gmail.com \
--to=philipp.zabel@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®