Re: [PATCH] jffs2: prevent xattr node from overflowing the eraseblock

[Ilya Denisyev <dev@elkcl.ru>]

On 15.04.2024 17:28, Christian Brauner wrote:
> Can this overflow? I.e. can c->sector_size be smaller than c->cleanmarker_size?

I'm pretty sure that it can't. As far as I know, c->sector_size is at 
least the MTD eraseblock size[1] or even bigger in the case of 
DataFlash[2]. The cleanmarker is either the size of the smallest JFFS2 
node[3] (currently 12 bytes), 0 bytes for certain flash types (like 
NAND, where it's stored out of band[4]) or apparently at most the MTD 
writesize (which, as far as I understand, is not larger than the 
erasesize) for Intel Sibley[5].

Considering that any JFFS2 node must fit inside one block and that the 
cleanmarker is the smallest node there is (if it's even a proper node), 
it shouldn't overflow, otherwise JFFS2 won't work in the first place.


[1] https://elixir.bootlin.com/linux/v6.9-rc4/source/fs/jffs2/fs.c#L539

[2] https://elixir.bootlin.com/linux/v6.9-rc4/source/fs/jffs2/wbuf.c#L1253

[3] https://elixir.bootlin.com/linux/v6.9-rc4/source/fs/jffs2/fs.c#L557

[4] https://elixir.bootlin.com/linux/v6.9-rc4/source/fs/jffs2/wbuf.c#L1190

[5] https://elixir.bootlin.com/linux/v6.9-rc4/source/fs/jffs2/wbuf.c#L1296


---

Best regards,

Ilya