Re: [PATCH 1/1] mfd: rk808: Prepare rk805 for poweroff

[Stefan Mavrodiev <stefan@olimex.com>]

On 1/9/19 3:11 PM, Heiko Stübner wrote:
> Am Mittwoch, 9. Januar 2019, 14:10:34 CET schrieb Stefan Mavrodiev:
>> On 1/9/19 3:07 PM, Heiko Stübner wrote:
>>> Hi Stefan, Lee,
>>>
>>> Am Dienstag, 2. Oktober 2018, 09:38:29 CET schrieb Stefan Mavrodiev:
>>>> RK805 has SLEEP signal, which can put the device into SLEEP or OFF
>>>> mode. The default is SLEEP mode.
>>>>
>>>> However, when the kernel performs power-off (actually the ATF) the
>>>> device will not go fully off and this will result in higher power
>>>> consumption and inability to wake the device with RTC alarm.
>>>>
>>>> The solution is to enable pm_power_off_prepare function, which will
>>>> configure SLEEP pin for OFF function.
>>>>
>>>> Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
>>> just found this while cleaning my inbox and this change looks
>>> significant and it seems hasn't been applied yet.
>>>
>>> I guess this is still relevant, right?
>> Yes, but I guess it's out-of-sync with the latest kernel.
> you could rebase and resend it :-)

I would like to test it first. I'll resend the patch in couple of days
(I hope so).

PS: The previous email was from different mail address. Sorry about that.

Stefan Mavrodiev

>
>
>>>> ---
>>>>
>>>>    drivers/mfd/rk808.c | 24 ++++++++++++++++++++++++
>>>>    1 file changed, 24 insertions(+)
>>>>
>>>> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
>>>> index 216fbf6..50f3f78 100644
>>>> --- a/drivers/mfd/rk808.c
>>>> +++ b/drivers/mfd/rk808.c
>>>> @@ -387,6 +387,25 @@ static void rk805_device_shutdown(void)
>>>>
>>>>    		dev_err(&rk808_i2c_client->dev, "power off error!\n");
>>>>    
>>>>    }
>>>>
>>>> +static void rk805_device_shutdown_prepare(void)
>>>> +{
>>>> +	int ret;
>>>> +	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
>>>> +
>>>> +	if (!rk808) {
>>>> +		dev_warn(&rk808_i2c_client->dev,
>>>> +			 "have no rk805, so do nothing here\n");
>>>> +
>>>> +		return;
>>>> +	}
>>>> +
>>>> +	ret = regmap_update_bits(rk808->regmap,
>>>> +				 RK805_GPIO_IO_POL_REG,
>>>> +				 SLP_SD_MSK, SHUTDOWN_FUN);
>>>> +	if (ret)
>>>> +		dev_err(&rk808_i2c_client->dev, "power off error!\n");
>>>> +}
>>>> +
>>>>
>>>>    static void rk808_device_shutdown(void)
>>>>    {
>>>>    
>>>>    	int ret;
>>>>
>>>> @@ -549,6 +568,10 @@ static int rk808_probe(struct i2c_client *client,
>>>>
>>>>    	if (pm_off && !pm_power_off) {
>>>>    	
>>>>    		rk808_i2c_client = client;
>>>>    		pm_power_off = pm_pwroff_fn;
>>>>
>>>> +	} else if (pm_off && !pm_power_off_prepare &&
>>>> +		   rk808->variant == RK805_ID) {
>>>> +		rk808_i2c_client = client;
>>>> +		pm_power_off_prepare = rk805_device_shutdown_prepare;
>>>>
>>>>    	}
>>>>    	
>>>>    	return 0;
>>>>
>>>> @@ -564,6 +587,7 @@ static int rk808_remove(struct i2c_client *client)
>>>>
>>>>    	regmap_del_irq_chip(client->irq, rk808->irq_data);
>>>>    	pm_power_off = NULL;
>>>>
>>>> +	pm_power_off_prepare = NULL;
>>>>
>>>>    	return 0;
>>>>    
>>>>    }
>
>
>