mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: Josef Schlehofer <pepe.schlehofer@gmail.com>, netdev@vger.kernel.org
Cc: marcin.s.wojtas@gmail.com, andrew+netdev@lunn.ch,
	davem@davemloft.net, edumazet@kernel.org, kuba@kernel.org,
	pabeni@redhat.com, w@1wt.eu, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net v2 1/5] net: mvneta: lift the per-queue TX rate limits
Date: Tue, 3 Nov 2026 19:56:52 +0100	[thread overview]
Message-ID: <750783ff-37d0-4b91-beaf-d36c8080a4d3@bootlin.com> (raw)
In-Reply-To: <20261103125021.70845-2-pepe.schlehofer@gmail.com>

Hi,

On 11/3/26 13:50, Josef Schlehofer wrote:
> The per-queue rate limits set by mqprio stay in effect after the
> shaper is turned off.
> 
> mvneta_disable_per_queue_rate_limit() only changes the mode bits in
> MVNETA_TXQ_CMD1_REG. The token buckets keep limiting the TX queues
> with that mode as well, and their refill rate still holds the old
> limit.
> 
> Refill the token buckets of all TX queues at full rate when the rate
> limit is disabled. Deleting the qdisc reaches this code only with the
> next patch.
> 
> Tested on a Turris Omnia (Armada 385) with 10 Mbit/s limits on a
> 100 Mbit/s link. When mqprio was set up again without a shaper, each
> TX queue stayed at 10 Mbit/s. With this patch the link reaches
> 94 Mbit/s.
> 
> Fixes: 2551dc9e398c ("net: mvneta: Add TC traffic shaping offload")
> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Thanks for addressing this,

Maxime

> ---
>  drivers/net/ethernet/marvell/mvneta.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> index ea755cf05b9e..9b9efac2846e 100644
> --- a/drivers/net/ethernet/marvell/mvneta.c
> +++ b/drivers/net/ethernet/marvell/mvneta.c
> @@ -5204,9 +5204,16 @@ static int mvneta_enable_per_queue_rate_limit(struct mvneta_port *pp)
>  static void mvneta_disable_per_queue_rate_limit(struct mvneta_port *pp)
>  {
>  	u32 val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG);
> +	int queue;
>  
>  	val |= (MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN);
>  	mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val);
> +
> +	/* The token buckets still limit the queues, refill them at full rate */
> +	val = (1 << MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT) |
> +	      MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX;
> +	for (queue = 0; queue < txq_number; queue++)
> +		mvreg_write(pp, MVNETA_TXQ_BUCKET_REFILL_REG(queue), val);
>  }
>  
>  static int mvneta_setup_queue_rates(struct mvneta_port *pp, int queue,


  reply	other threads:[~2026-11-03 18:57 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-03 12:50 [PATCH net v2 0/5] net: mvneta: fix the TX queue arbitration and the mqprio offload Josef Schlehofer
2026-11-03 12:50 ` [PATCH net v2 1/5] net: mvneta: lift the per-queue TX rate limits Josef Schlehofer
2026-11-03 18:56   ` Maxime Chevallier [this message]
2026-11-03 12:50 ` [PATCH net v2 2/5] net: mvneta: fix the removal of the mqprio offload Josef Schlehofer
2026-11-03 19:00   ` Maxime Chevallier
2026-11-03 12:50 ` [PATCH net v2 3/5] net: mvneta: serve the TX queues in weighted round robin Josef Schlehofer
2026-11-03 12:50 ` [PATCH net v2 4/5] net: mvneta: unwind a failed mqprio setup Josef Schlehofer
2026-11-03 19:01   ` Maxime Chevallier
2026-11-03 12:50 ` [PATCH net v2 5/5] net: mvneta: keep the TX rate limits across open and MTU change Josef Schlehofer
2026-11-03 18:56 ` [PATCH net v2 0/5] net: mvneta: fix the TX queue arbitration and the mqprio offload Maxime Chevallier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=750783ff-37d0-4b91-beaf-d36c8080a4d3@bootlin.com \
    --to=maxime.chevallier@bootlin.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcin.s.wojtas@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pepe.schlehofer@gmail.com \
    --cc=w@1wt.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®