mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Shuai Xue <xueshuai@linux.alibaba.com>
To: Huang Yiwei <quic_hyiwei@quicinc.com>,
	will@kernel.org, rafael@kernel.org, lenb@kernel.org,
	james.morse@arm.com, tony.luck@intel.com, bp@alien8.de
Cc: quic_aiquny@quicinc.com, quic_satyap@quicinc.com,
	linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, kernel@quicinc.com,
	kernel@oss.qualcomm.com
Subject: Re: [PATCH v2] firmware: SDEI: Allow sdei initialization without ACPI_APEI_GHES
Date: Thu, 8 May 2025 09:11:39 +0800	[thread overview]
Message-ID: <750e66eb-f5c8-4127-8c02-14b8928f7a28@linux.alibaba.com> (raw)
In-Reply-To: <20250507045757.2658795-1-quic_hyiwei@quicinc.com>



在 2025/5/7 12:57, Huang Yiwei 写道:
> SDEI usually initialize with the ACPI table, but on platforms where
> ACPI is not used, the SDEI feature can still be used to handle
> specific firmware calls or other customized purposes. Therefore, it
> is not necessary for ARM_SDE_INTERFACE to depend on ACPI_APEI_GHES.
> 
> In commit dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES
> in acpi_init()"), to make APEI ready earlier, sdei_init was moved
> into acpi_ghes_init instead of being a standalone initcall, adding
> ACPI_APEI_GHES dependency to ARM_SDE_INTERFACE. This restricts the
> flexibility and usability of SDEI.
> 
> This patch corrects the dependency in Kconfig and splits sdei_init()
> into two separate functions: sdei_init() and acpi_sdei_init().
> sdei_init() will be called by arch_initcall and will only initialize
> the platform driver, while acpi_sdei_init() will initialize the
> device from acpi_ghes_init() when ACPI is ready. This allows the
> initialization of SDEI without ACPI_APEI_GHES enabled.
> 
> Fixes: dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()")
> Cc: Shuai Xue <xueshuai@linux.alibaba.com>
> Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com>
> ---
>   drivers/acpi/apei/Kconfig   |  1 +
>   drivers/acpi/apei/ghes.c    |  2 +-
>   drivers/firmware/Kconfig    |  1 -
>   drivers/firmware/arm_sdei.c | 11 ++++++++---
>   include/linux/arm_sdei.h    |  4 ++--
>   5 files changed, 12 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig
> index 3cfe7e7475f2..070c07d68dfb 100644
> --- a/drivers/acpi/apei/Kconfig
> +++ b/drivers/acpi/apei/Kconfig
> @@ -23,6 +23,7 @@ config ACPI_APEI_GHES
>   	select ACPI_HED
>   	select IRQ_WORK
>   	select GENERIC_ALLOCATOR
> +	select ARM_SDE_INTERFACE if ARM64
>   	help
>   	  Generic Hardware Error Source provides a way to report
>   	  platform hardware errors (such as that from chipset). It
> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
> index 289e365f84b2..0f3c663c1b0a 100644
> --- a/drivers/acpi/apei/ghes.c
> +++ b/drivers/acpi/apei/ghes.c
> @@ -1715,7 +1715,7 @@ void __init acpi_ghes_init(void)
>   {
>   	int rc;
>   
> -	sdei_init();
> +	acpi_sdei_init();
>   
>   	if (acpi_disabled)
>   		return;
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index aadc395ee168..7df19d82aa68 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -31,7 +31,6 @@ config ARM_SCPI_PROTOCOL
>   config ARM_SDE_INTERFACE
>   	bool "ARM Software Delegated Exception Interface (SDEI)"
>   	depends on ARM64
> -	depends on ACPI_APEI_GHES
>   	help
>   	  The Software Delegated Exception Interface (SDEI) is an ARM
>   	  standard for registering callbacks from the platform firmware
> diff --git a/drivers/firmware/arm_sdei.c b/drivers/firmware/arm_sdei.c
> index 3e8051fe8296..71e2a9a89f6a 100644
> --- a/drivers/firmware/arm_sdei.c
> +++ b/drivers/firmware/arm_sdei.c
> @@ -1062,13 +1062,12 @@ static bool __init sdei_present_acpi(void)
>   	return true;
>   }
>   
> -void __init sdei_init(void)
> +void __init acpi_sdei_init(void)
>   {
>   	struct platform_device *pdev;
>   	int ret;
>   
> -	ret = platform_driver_register(&sdei_driver);
> -	if (ret || !sdei_present_acpi())
> +	if (!sdei_present_acpi())
>   		return;
>   
>   	pdev = platform_device_register_simple(sdei_driver.driver.name,
> @@ -1081,6 +1080,12 @@ void __init sdei_init(void)
>   	}
>   }
>   
> +static int __init sdei_init(void)
> +{
> +	return platform_driver_register(&sdei_driver);
> +}
> +arch_initcall(sdei_init);
> +
>   int sdei_event_handler(struct pt_regs *regs,
>   		       struct sdei_registered_event *arg)
>   {
> diff --git a/include/linux/arm_sdei.h b/include/linux/arm_sdei.h
> index 255701e1251b..f652a5028b59 100644
> --- a/include/linux/arm_sdei.h
> +++ b/include/linux/arm_sdei.h
> @@ -46,12 +46,12 @@ int sdei_unregister_ghes(struct ghes *ghes);
>   /* For use by arch code when CPU hotplug notifiers are not appropriate. */
>   int sdei_mask_local_cpu(void);
>   int sdei_unmask_local_cpu(void);
> -void __init sdei_init(void);
> +void __init acpi_sdei_init(void);
>   void sdei_handler_abort(void);
>   #else
>   static inline int sdei_mask_local_cpu(void) { return 0; }
>   static inline int sdei_unmask_local_cpu(void) { return 0; }
> -static inline void sdei_init(void) { }
> +static inline void acpi_sdei_init(void) { }
>   static inline void sdei_handler_abort(void) { }
>   #endif /* CONFIG_ARM_SDE_INTERFACE */
>   

LGTM. Thanks.

Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>

Shuai


  parent reply	other threads:[~2025-05-08  1:17 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-07  4:57 Huang Yiwei
2025-05-07 11:21 ` Rafael J. Wysocki
2025-05-08  0:24 ` Gavin Shan
2025-05-08  1:11 ` Shuai Xue [this message]
2025-05-08 13:02 ` Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=750e66eb-f5c8-4127-8c02-14b8928f7a28@linux.alibaba.com \
    --to=xueshuai@linux.alibaba.com \
    --cc=bp@alien8.de \
    --cc=james.morse@arm.com \
    --cc=kernel@oss.qualcomm.com \
    --cc=kernel@quicinc.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_aiquny@quicinc.com \
    --cc=quic_hyiwei@quicinc.com \
    --cc=quic_satyap@quicinc.com \
    --cc=rafael@kernel.org \
    --cc=tony.luck@intel.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®