From: Damien Le Moal <dlemoal@kernel.org>
To: Alexander Roman <monderasdor@gmail.com>, linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Niklas Cassel <cassel@kernel.org>
Subject: Re: [PATCH V3] ahci: enhance error handling in ahci_init_one
Date: Sat, 24 May 2025 14:36:24 +0200 [thread overview]
Message-ID: <7533f274-dcc9-42a5-9e5a-74019255fd3c@kernel.org> (raw)
In-Reply-To: <20250522102653.1169-1-monderasdor@gmail.com>
On 5/22/25 12:26, Alexander Roman wrote:
> Add comprehensive error handling to ahci_init_one() to:
> 1. Prevent resource leaks during initialization failures
> 2. Ensure proper cleanup of allocated resources
> 3. Provide detailed error reporting for debugging
> 4. Maintain consistent error handling patterns
>
> Key changes:
> - Initialize all pointers to NULL
> - Add centralized error handling via goto labels
> - Improve error messages with specific error codes
> - Remove duplicate Intel PCS quirk call
> - Adjust log levels (dev_err for fatal, dev_dbg for quirks)
>
> Signed-off-by: Alexander Roman <monderasdor@gmail.com>
I received 2 x v3 patches with different commit messages and titles, but these 2
patches touch the same code.. Very confusing...
Which one is the "correct" patch you want us to consider ?
And please send patches to *all* maintainers of the subsystem.
You can check that with "scripts/get_maintainer.pl driver/ata"
(you are missing Niklas).
Note: it is too late to apply this patch anyway. If accepted, it will go in
during 6.16-rc1. So no rush to clean this up. Take your time and make a proper
patch please.
> ---
> drivers/ata/ahci.c | 98 ++++++++++++++++++++++++++--------------------
> 1 file changed, 55 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> index abc1234..def5678 100644
> --- a/drivers/ata/ahci.c
> +++ b/drivers/ata/ahci.c
> @@ -1611,7 +1611,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> struct ahci_host_priv *hpriv = NULL;
> struct ata_host *host = NULL;
> void __iomem *mmio = NULL;
> - int n_ports, i, rc;
> + int n_ports, i, rc = -ENOMEM;
> u32 tmp, cap, port_map;
> u32 saved_cap;
> struct device *dev = &pdev->dev;
> @@ -1619,60 +1619,72 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> VPRINTK("ahci_init_one enter\n");
>
> rc = pcim_enable_device(pdev);
> - if (rc)
> - return rc;
> + if (rc) {
> + dev_err(dev, "failed to enable PCI device (err=%d)\n", rc);
> + goto err_out;
> + }
>
> rc = pcim_iomap_regions(pdev, 1 << AHCI_PCI_BAR_STANDARD, DRV_NAME);
> - if (rc)
> - return rc;
> + if (rc) {
> + dev_err(dev, "failed to map PCI regions (err=%d)\n", rc);
> + goto err_out;
> + }
> mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR_STANDARD];
>
> rc = pci_alloc_irq_vectors(pdev, 1, AHCI_MAX_PORTS, PCI_IRQ_ALL_TYPES);
> - if (rc < 0)
> - return rc;
> + if (rc < 0) {
> + dev_err(dev, "failed to allocate IRQ vectors (err=%d)\n", rc);
> + goto err_out;
> + }
>
> hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
> - if (!hpriv)
> - return -ENOMEM;
> + if (!hpriv) {
> + dev_err(dev, "failed to allocate host private data\n");
> + goto err_out;
> + }
>
> hpriv->mmio = mmio;
> hpriv->flags = (unsigned long)ent->driver_data;
> hpriv->irq = pdev->irq;
>
> if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
> - ahci_intel_pcs_quirk(pdev, hpriv);
> + rc = ahci_intel_pcs_quirk(pdev, hpriv);
> + if (rc)
> + dev_dbg(dev, "Intel PCS quirk failed (err=%d)\n", rc);
> }
>
> ahci_get_port_map_mask(dev, hpriv);
>
> rc = ahci_pci_save_initial_config(pdev, hpriv);
> - if (rc)
> - return rc;
> + if (rc) {
> + dev_err(dev, "failed to save initial config (err=%d)\n", rc);
> + goto err_out;
> + }
>
> cap = hpriv->cap;
> saved_cap = cap;
> port_map = hpriv->port_map;
> n_ports = ahci_calc_n_ports(cap, port_map);
>
> host = ata_host_alloc_pinfo(dev, ahci_port_info + ent->driver_data, n_ports);
> - if (!host)
> - return -ENOMEM;
> + if (!host) {
> + dev_err(dev, "failed to allocate ATA host\n");
> + goto err_out;
> + }
>
> host->private_data = hpriv;
>
> rc = ahci_configure_dma_masks(pdev, hpriv);
> - if (rc)
> - return rc;
> + if (rc) {
> + dev_err(dev, "failed to configure DMA masks (err=%d)\n", rc);
> + goto err_host;
> + }
>
> ahci_pci_init_controller(host);
> rc = ahci_reset_controller(host);
> - if (rc)
> - return rc;
> -
> - if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
> - ahci_intel_pcs_quirk(pdev, hpriv);
> + if (rc) {
> + dev_err(dev, "failed to reset controller (err=%d)\n", rc);
> + goto err_host;
> }
>
> if (ahci_broken_system_poweroff(pdev)) {
> @@ -1685,20 +1697,20 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> }
>
> if (is_mcp89_apple(pdev)) {
> - ahci_mcp89_apple_enable(pdev);
> + rc = ahci_mcp89_apple_enable(pdev);
> + if (rc)
> + dev_warn(dev, "Apple MCP89 enable failed (err=%d)\n", rc);
> }
>
> - acer_sa5_271_workaround(hpriv, pdev);
> -
> ahci_init_irq(pdev, n_ports, hpriv);
> ahci_pci_enable_interrupts(host);
>
> ahci_pci_print_info(host);
>
> rc = ata_host_activate(host, hpriv->irq, ahci_interrupt, IRQF_SHARED,
> - &ahci_sht);
> - if (rc)
> - return rc;
> -
> - return 0;
> + &ahci_sht);
> + if (rc) {
> + dev_err(dev, "failed to activate ATA host (err=%d)\n", rc);
> + goto err_host;
> + }
> }
>
--
Damien Le Moal
Western Digital Research
next prev parent reply other threads:[~2025-05-24 12:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-19 22:13 [PATCH V2] ahci: enhance error handling and resource management " Alexander Roman
2025-05-22 5:42 ` Damien Le Moal
2025-05-22 10:00 ` [PATCH V3] " Alexander Roman
2025-05-24 12:37 ` Damien Le Moal
2025-05-22 10:26 ` [PATCH V3] ahci: enhance error handling " Alexander Roman
2025-05-24 12:36 ` Damien Le Moal [this message]
2025-05-24 22:10 ` Niklas Cassel
2025-05-26 8:11 ` Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7533f274-dcc9-42a5-9e5a-74019255fd3c@kernel.org \
--to=dlemoal@kernel.org \
--cc=cassel@kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=monderasdor@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®